Transcript RESS-6-14 REESS mechanical integrity test structure Folie 1 REESS mechanical integrity test 6.4.2 Mechanical Integrity 6.4.2.1 Vehicle based test 6.4.2.1.1Vehicle based dynamic test Crash test acc.

RESS-6-14
REESS mechanical integrity test
structure
Folie 1
REESS mechanical integrity test
6.4.2 Mechanical Integrity
6.4.2.1 Vehicle based test
6.4.2.1.1Vehicle based dynamic test
Crash test acc. ECE-R94/95
6.4.2.1.2Vehicle based static test
- static test using contact force
acc. ECE-R94/95
- using vehicle structure
No vehicle installation limitations
vehicle
v
allowed
Folie 2
REESS mechanical integrity test
6.4.2 Mechanical Integrity
6.4.2.1 Vehicle based test
6.4.2.1.1Vehicle based dynamic test
Crash test acc. ECE-R94/95
6.4.2.1 Component based test
Fmax= 100 kN
REESS
6.4.2.1.2Vehicle based static test
- static test using contact force
acc. ECE-R94/95
- using vehicle structure
No vehicle installation limitations
xy
Vehicle installation limitations
not allowed
vehicle
v
allowed
v
Allowed
(100 kN)
420mm
300mm
Folie 3
REESS mechanical integrity test
6.4.2 Mechanical Integrity
6.4.2.1 Vehicle based test
6.4.2.1.1Vehicle based dynamic test
Crash test acc. ECE-R94/95
6.4.2.1 Component based test
Fmax= 100 kN
xy
No contact force
(inertial load only)
REESS
6.4.2.1.2Vehicle based static test
- static test using contact force
acc. ECE-R94/95
- using vehicle structure
No vehicle installation limitations
6.4.2.1 Component based test
“safety zone”
Vehicle installation limitations
Vehicle installation limitations
not allowed
not allowed
vehicle
v
allowed
v
v
Allowed
(100 kN)
420mm
300mm
0 kN
420mm
300mm
Folie 4
REESS mechanical integrity test
Component based integrity test
Definition of « Forbidden Zone » & « Safe Zone »
300 mm
420 mm
Front
R Point
400 mm
200 mm
Rear
600 mm
400 mm
200 mm
Chassis frame
Folie 5