Transcript Start of S2 Milestone Work H. Padamsee Intro • At KEK S2 meeting we decided to make a list of milestones and eventually.

Start of S2 Milestone Work
H. Padamsee
Intro
• At KEK S2 meeting we decided to make a
list of milestones and eventually cost S2
activities
• I tried to start a milestone list consistent
with S0 and S1 plan
• and look for consistency with current test
facility plans
• Please suggest revisions, additions…
By end of 06
• Cavities
– Complete 10 cavities
• 4 ACCEL, 4 AES, 2 Jlab
– Continue testing 4 ICHIRO and 4 TESLA-shape cavities at KEK
• Order additional cavities
– 14 US
– 10 KEK
• Cryomodules
– Cryomodule #6 complete at DESY and tested at Cryomodule Test
Facility (DESY)
• First candidate for S1
– Cryomodule #6 installed in TTF-II (FLASH)
– Procure cryomodule parts for Gen III module
– Procure 12 couplers
• RF
– Procure Two 10 MW klystrons
By end of 07
•
Cavities
– 70 cavities ordered and delivered over the course of 07
• 32 cavities delivered in US
• 10 cavities delivered at KEK
• 30 cavities delivered to DESY for XFEL (XX available for ILC?)
– Order 160 cavities globally after Fall 07 (see S0.2)
– Carry out 90 treatment and testing runs complete
• 24 good cavities available from S0 production like effort of 06 and 07
•
Cryomodules
– One type III cryomodule completed at Fermilab from DESY supplied cavities
– Complete One (4 cavity + 4 cavity) cryomodule at KEK STF
– Finish design work on Type IV cryomodule by mid-07
• Is this region-compatible?
– Order parts for 2 Type IV cryomodules (one in mid-07 and one in fall 07)
– Process couplers
By End of 07
• Beam Preparations
– Work on injectors at STF and FNAL
• Infrastructure for RF Units
– Fermilab, Argonne, Jlab…
• Install EP, VTS, HTS, CAF
• Refrigeration XX watts for HTS
– KEK
• Install EP, CAF…
• Refrigeration, xx watts
– DESY
– Other ?
By End of 08:
• Cavities
– 160 cavities delivered globally (see S0.2)
– Complete 200 process and test cycles globally (S0.2)
• Yield = 130 good cavities
– Continue to order XX cavities for industrialization?
• Cryomodules
– Complete 3 cryomodules from 24 good cavities of 07
• One Type III cryomodule
• Two Type IV cryomodules
– Order parts for 12 cryomodules of Type IV or ILC-type
• 4 CM per region (3 plus spare)
• RF
• Beam
• Infrastructure for RF Units
– CM test stand
By End of 09
• Cavities
– Continue to process and test XX cavities for industrial
cryomodules?
• Cryomodules
– Populate 12 modules of Type IV or ILC type
• 4 per region
• Need 96 good cavities globally
– Continue to order XX cryomodules for industrialization?
• RF Unit
– 1 “learning” RF unit assembled in US
• Other
– Injector available for beam tests
By End of 2010
• RF Units
– Continue testing first RF unit
– Assemble and Test 3- 4 RF units globally
• One per region
• Cavities and Cryomodules
– Continue industrialization activity