Transcript I3 - MAC800 CardioSoft
Slide 1
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 2
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 3
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 4
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 5
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 6
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 7
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 8
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 9
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 10
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 11
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 12
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 13
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 14
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 15
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 16
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 17
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 2
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 3
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 4
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 5
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 6
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 7
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 8
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 9
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 10
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 11
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 12
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 13
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 14
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 15
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 16
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk
Slide 17
Intelligent Integration
GE MAC 800 ECG
ECG INTEGRATION
MAC 800 for EMIS Web (using CardioSoft)
• The Patient ID number and other details are entered in to
the MAC800
• The ECGs are recorded
• Multiple ECGs for one or more patients can be recorded
and stored in the MAC800
• The MAC800 is then connected to the PC via the data
cable and the ECGs selected for transmission
• The ECGs can be transmitted in batches or individually
• The ECG files are received in to the GE CardioSoft ECG
software
• PDF reports are automatically created for each ECG
recording received
• With the clinical system open, the I3 integration software
is started.
• MAC PDF filer is selected from the product selection
screen.
• The list of available ECG reports is shown
• I3 will automatically look up the patient details based on
the ID number entered and associate the ECG report with
the corresponding patient
• If a matching patient ID is not found in the clinical
system, a patient search can be performed
• Clicking the Search button opens the patient search
feature where the patient name can be entered
• A list of possible matches is returned permitting selection
of the correct patient
• The ECG report is then associated with the patient
selected
• The ECG report can be previewed by clicking the View
button
• A comment can also be added to any individual report
that will be shown alongside the clinical system
attachment
• When ready, click the Send button
• All reports selected for Send will be filed back to the
clinical system in one go
• The attachment is filed along with any user entered
comments
• A Read code is also optionally filed
• Double clicking the attachment will open the report
• Immediately accessible on any EMIS terminal
Intelligent Integration
GE MAC800 ECG
ECG INTEGRATION
MAC800 CardioSoft – EMIS WEB
For more information contact us on 0114 243 3896 or
visit www.numed.co.uk