Slide 1

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 2

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 3

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 4

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 5

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 6

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 7

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 8

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 9

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 10

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 11

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 12

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 13

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 14

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 15

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 16

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 17

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 18

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 19

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 20

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 21

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 22

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 23

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 24

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 25

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 26

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 27

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 28

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 29

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 30

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 31

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 32

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 33

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 34

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 35

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 36

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 37

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 38

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 39

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 40

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 41

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 42

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 43

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com


Slide 44

Gen-XBRL filling Manual
[Take Sample of Latest Revised Schedule-VI XBRL
Balance Sheet(PDF) and Statement of P&L(PDF)
for Better Help] from:
http://saginfotech.com/help.aspx No.7 & 8.)

SAG Infotech Private Limited
Soft solutions for those can not afford to make errors.

Points to “REMEMBER” while XBRL filling
from Better to Best Compliance:
1) MCA XBRL filling Manual (Version 2.0)
2) MCA Taxonomy on XBRL with Revised Schedule-VI
(for F.Y. 2011-2012)
1) Revised Schedule-VI (Guidance note issued by ICAI)
2) Accounting Standards
3) Listing Agreement Disclosures
4) SEBI: ICDR Guidelines, 2009
5) XBRL Business Rules, 2012 read with provisions of the
Companies Act 1956.

Flow of XBRL Work

Steps for XBRL 2011-2012:
1) Fill the data “Gen-XBRL Utility” is a Free to download taxonomy
classification from http://saginfotech.com/Downloads.aspx as No. 8
(Setup) and No.9 (Update).
2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at
given path with company’s CIN.
3) Now, Import the above exported file in our Softwares “Gen-Comp Law”
or “Gen-XBRL” for conversion, they have the same features as Gen-XBRL
Utility.

4) In software you can convert the data into XML and check for Validation
and pre-scrutiny.
5) After Successful Validation & Pre-scrutiny you can Upload the XML file
with e-form 23AC and 23ACA.

(1) Fill the data in “Gen-XBRL Utility” is a Free to download taxonomy classification from
http://saginfotech.com/Downloads.aspx as No. 8 (Setup) and No.9 (Update).
The data will save automatically.

DO READ THE GIVEN “GENERAL INSTRUCTIONS”

(2) Export the data from “Gen-XBRL Utility” and a Zip file will be created at given path
with company’s CIN.

(3) Now, Import the above exported file in our Softwares “Gen-Comp Law” or “Gen-XBRL”
for conversion, they have the same features as Gen-XBRL Utility.

After Export the data from “Gen-XBRL Utility” Import the Zip file in software
from here:

Here you need to convert the data saved in utility to XML file through our Softwares “GenComp Law” or “Gen-XBRL” they have the same features as Gen-XBRL Utility.

(4) In software i.e. “Gen-Comp Law” and “Gen-XBRL” you can convert the data into XML and
check for Validation and pre-scrutiny.

Note: Give the path where you want to create the XML file and further it will
automatically ask you to validate and pre-scrutiny.

(5) After Successful Validation & Pre-scrutiny you can Upload the XML file with e-form
23AC and 23ACA.

Financial Data Feeding
Manual

START with data in:
•
•
•
•
•
•
•
•

Balance Sheet
Statement of Profit and Loss
Cash flows ( Direct or Indirect Method)
Notes (All which are Applicable)
Disclosures - General Information
Disclosures - Auditors report
Disclosures - Signatories of Balance Sheet
Disclosures - Directors Report
NOTE : Applicability of other Notes & Disclosures can be
judged only by seeing at its Financials and knowledge of
Accounting Standards and XBRL Rules.

Major data filling changes

Mark “Auto Fill” fills the
data automatically from its
relevant Note and
schedules So least
possibility of errors.

Filling-up of data in “Notes-Share Capital”

Entire Share Capital
(Equity +Preference)

Total Amt. of
types of Equity
Shares only.

“DO-NOT fill anything in Grey color columns”

Individual Equity
Share capital. i.e.
Rs.10 or Rs.100
denomination.

Now you only need to select Child Member and fill data in that only e.g. Select “Equity
Shares 1” and its Total “Equity Shares” and “Share Capital” will come automatically and
balances will be auto-calculated in Parent Members in whole taxonomy.

“Show Total Columns”
will show you all the
parent and child Tags.

Filling-up of data in “Notes-Reserves & Surplus”
“Reserves [Member]” =
Total Reserves

Add columns for
Different types of
Reserves i.e. Capital
Reserve[Member] etc.

“General Reserve
[Member]” and so
on.

Filling-up of data in “Notes -Tangible and Intangible Assets”
First Select “Company
Total Tangible
Assets[Member]”

Need to Add 3 columns for every Class of Tangible asset
(i)Gross carrying amount (ii)Accumulated Depreciation and
impairment and (iii)Carrying Amount

Note: Please see further for more clarity on this Notes - Tangible & Intangible Assets.

Important : This is How final PDF will be generated and reason
we select the columns for each and every kind of Asset and
similarly further Notes will also work as per their classes & sub
classes.

# Parent and child Tag Relativity : (for example) If you are
selecting “Factory Building” {Child Member} the also need to select
“Building” as its {Parent Member} else it shows error on Validating.

Parent and Child Member Tag Relativity:
This is to be selected and taken in over all taxonomy where
Parent and Child Members option is given as validation tool
checks for this, Few examples of such Tags are:
Notes - Reserve & Surplus
Notes - Borrowings
Notes - Non-Current Investments
Notes - Current Investments
Notes - Tangible Assets
Notes - Intangible Assets, etc.
And many more where you see such classification.

NOTE : Please do select this relativity in Taxonomy!!

Cross Verification of Balances : i.e. whatever data is provided in Profit and
Loss same will be checked with its relevant Notes and Schedules such as
“Notes - Statement of Profit and Loss” with “Notes - Cash Flows”.

e.g.
Extra Ordinary Items
Cash & Bank Equivalents
Items before Tax ,etc.

General Information Feeding
Manual

“General Instructions” to be followed within our “XBRL Utility”:
1) All "General Information about financial statements" is required to filled and
use Pre-fill button where CIN / DIN no. is given.
2) Do not fill any thing in Blank columns if No amount and no value is there.
3) If there is an amount in either of the year, value for corresponding year must
be given, Zero (0) if no amount.
4) By default in Revised Schedule-VI Now there is only “Vertical Method of
Balance Sheet.”
5) Then start feeding data in 17 Notes related to Balance sheet from "NotesShare Capital" to "Additional Details – Balance Sheet".
6) In the taxonomy “Schedules” are termed as “Notes”.
7) After this you have to select the "Statement of Profit & Loss". There is No
Direct or Indirect Method.
8) After that start feeding Data in "Notes - Revenue & Notes - Subclassification
and Notes on income and expenses and Notes - Additional information
statement of profit and loss" then you have to prepare Statement of Cash
flow either in Indirect or Direct Method; Here the Numeric Values data
feeding gets completed.

This is How we need to fill the General Information of a Company:

“General Instructions” to be continued……..
9) After feeding Numeric data ,the Basic Notes are following:
i. Notes - Disclosure of accounting policies, changes in accounting policies
and estimates.
ii. Notes - Director remuneration and other information.
iii. Disclosures - Auditors report
iv. Disclosures - Signatories of balance sheet
v. Disclosures - Directors report.
10) You can copy paste the alpha numeric data such as above in Text Blocks.
11) Remaining Notes and Disclosures are required to be filled if the particular
business transaction is there in the given company.
12) While copying the data in Text Block (s) remember that it will take the data as
per HTML guidelines as there should be no special characters e.g. *,?,",!,etc. or
more than one table within it, else it will show HTML errors at the time of prescrutinizing.
13) In Details, Labels which are in Red color are mandatory so fill the data in all Red
color label fields.
14) In General information select content of report by default as "Balance Sheet".

15) Notes & Disclosures : are applicable by default. Those which are
“Not applicable” field and you want to make them applicable follow the
below given steps and those whose related transactions are there in your
company you can make it Applicable on respective representation i.e.
Balance sheet (or) Profit and Loss account.
3
4

2
1

16) Directors Name and Designation must be same as appearing on MCA database i.e.
http://www.mca.gov.in/DCAPortalWeb/dca/MyMCALogin.do?method=setDefaultProp
erty&mode=39

17) In General information while filling date "on which final accounts were approved in board
meeting" fill the dates related to it hand to hand in following sequence :(1) Directors Report : Date U/S 217 of Companies Act, 1956 and then Date of signing
board report.
(2) Auditors Report : Date of signing of B/S by Auditor and then Date of Signing of audit
report by him.

18) Check Name of Auditor with complete 6 digit Membership no. and his COP should be
there from http://icai.org/new_post.html?post_id=4797&c_id=290 > Search members
database by Membership No.

19) Text Blocks / Yellow color Fields: For tagging or capturing the information which is often
included in brackets in the labels in the company’s financial statements, can either be captured
as footnote [F3] or if detailed tags are available, the same should be tagged with the detailed
tags in the taxonomy i.e. Yellow color fields (or) Green Color Text Blocks.

Here you can copy-paste Auditors Report in given Green color Text Blocks,
similarly for other reporting:

This is How data will be copied and pasted in the Green color
Text Blocks, similarly for other reporting:

20) Others Elements: In case any information is present in the financial statements for which
corresponding tag/element is not available in the taxonomy, then the same needs to be captured
in the next-best-fit element in the taxonomy or should be included under the corresponding
‘Others’ element. This should be followed only in case the relevant tag is not available in the
taxonomy. It should not to be used generally.

21) Foot Notes: [Click F3 on particular column] It is imperative (relativity or logic or
philosophy behind mentioning ‘others element’) to include footnote w.r.t. the
‘Others element’ while preparing the instance document.

Foot Notes are helpful to be given when there is no such Tag found in taxonomy and
should be used for proper justification on your choice of selection of Tag.

e.g. In case of “Trade Payables”
(Short Term) NO direct Tag is
given.

22) Error Locater [Click F4 on particular column] : after validating, come back to
Home page of XBRL and press F4 for checking validation Errors and rectify them then
and there by double clicking on such errors.

23) Error Correction : This is How errors will come and you need to “double click” on
them and will take you to its respective error column and can rectify them then and
there!

24) Calculate No. of element (optional) : [Click F5 on particular column] to include
total of its different types.

25) Find Tag (optional) : [Click F6 on any page] to see all related elements to locate
and find that “key word” in Taxonomy.

26) Change Taxonomy View (optional) : [Click F7 ] inside “Details” Button and
“Table” is there, view of taxonomy will be changed as per your convenience.

For more knowledge on taxonomy please go
through entire rules at the starting of this
presentation.
Points to “REMEMBER” while XBRL filling
from Better to Best Compliance.

THANK YOU.
For More Knowledge and Assistance:

e: [email protected]
c: +91-141-4072000
Log on to: www.saginfotech.com