Innovative Surface Protection Based on Nano-Engineered Pure Monomolecular Silicium (Si14) 556 Kittyhawk Ave, Auburn, ME 04210 Permanonusa.com 877-294-1849
Download ReportTranscript Innovative Surface Protection Based on Nano-Engineered Pure Monomolecular Silicium (Si14) 556 Kittyhawk Ave, Auburn, ME 04210 Permanonusa.com 877-294-1849
Slide 1
Innovative Surface Protection
Based on Nano-Engineered
Pure Monomolecular Silicium (Si14)
556 Kittyhawk Ave, Auburn, ME 04210
Permanonusa.com 877-294-1849
1
Slide 2
Silicium
Periodic Table Symbol
Si
Atomic Number
14
Mohs Hardness
7
CAS-No.
7440-21-3
Fast Facts:
•Upon contact with air, Silicium builds a passive oxide
film.
•Silicium is the second most frequently occurring
element on Earth (after oxygen), however, it does not
readily occur in its elementary form; it readily combines
with oxygen, forming silicates - for example: sand
(Silicon Dioxide SiO2).
2
Slide 3
Silicium
(cont.)
Silicium Si14, as it is used in Permanon products, is a
monomolecular (pure) Silicium.
•The Si14 protection layer is insoluble in acids, except for
nitric acid containing hydrofluoric acid.
•In a hot alkaline solution Silicium dissolves by forming
hydrogen bonds and transmitting energy.
•Permanon can be easily removed at a pH of 12.5 or
higher
3
Slide 4
Polymers
Definition
A polymer is a macro-molecular material formed by
fusing single molecules into complex molecular
structures.
Polymers can be classified as:
• Co-Polymers: composed of 2 or more types of
monomer building blocks
•Isomeric Polymers: composed of a single type of
monomer building block
4
Slide 5
Products
“To meet the different demands and requirements of
a diverse range of applications, specific combinations of Silicium and Polymers were chosen.”
•The underlying formulation principles are the same in
all products.
•The isomeric and/or co-polymers are optimized and
vary, in a one-digit percentage range, between the
formulations.
•The Silicium Si14 content varies by formulation
5
Slide 6
Products (cont.)
Primary product Lines
• Facilities / Maintenance
– Sanides
– Allround: Supershine, Brilliant
Allround Supershine or Brilliant for all interior/exterior hard
surfaces
Sanides to clean and protect bathroom surfaces day to day
6
Slide 7
Products (cont.)
Primary product Lines
• Marine
– Boat
– Yacht Professional
Boat for all interior and exterior hard surfaces
Yacht Professional is used undiluted for 100% UV Protection
on high value surfaces
7
Slide 8
Products (cont.)
• Primary product Lines
• Automotive/Heavy Equipment
– Car
– Truck
• Car is for passenger and fleet vehicles, interior and exterior
surfaces
• Truck for all industrial and commercial vehicles, interior
and exterior surfaces
8
Slide 9
Products (cont.)
• Primary product Lines
• Aviation
– Aircraft
– Truck
• Aircraft is Boeing Compliant for all exterior surfaces and
is available in up to 1000 liter totes for automated
application equipment
• Truck for all ground support vehicles, interior and exterior
surfaces
9
Slide 10
Potential areas of application for the
Permanon Aviation product line
Civilian Aviation
FBO
Carrier/ Charter
Maintenance
Fuel Trucks
Aircraft Exteriors
Tools
Tugs
Aircraft Interiors
Refurbished Surfaces
Ticketing Areas
Work Stations
Boarding Bridges
New Paint:
Material Handling
Conveyors
Taxi/Bus
Cured- 24 hrs
Uncured- 14 days
10
Slide 11
Products (cont.)
• Primary product Lines
• Pool and Spa
– Pool and Spa
– Allround: Supershine, Brilliant
• Pool and Spa is for commercial and high traffic wet areas
including, interior/exterior pool and shower surfaces
• Allround Supershine or Brilliant is for all interior/exterior
hard surfaces including windows, tables, and trash areas
11
Slide 12
Products (cont.)
• Primary product Lines
• PS Paste
PS Paste is a combination of 16 pure soaps and contains
ZERO abrasives. It is effective on all organic deposits.
Available in 125 gm and 250 gm packaging or bulk sizes
up to 5 Kg.
12
Slide 13
Permanon Supershine
Application of:
•Permanon Supershine is a water-based solution
•Dilute with water to apply a pure Silicium-polymermixture for coating all types of surfaces
•A dust and oil-free surface area is all that is needed
•Apply with an industrial spray system, compression
sprayer, cloth, or by direct submersion.
13
Slide 14
Coating with Silicium
(cont.)
For application of (cont.):
•Rinse to remove water carrier/excess Permanon; it can be
removed with a water hose/power wash or a clean micro-fiber
cloth.
•Using demineralised rinse water eliminates the need for
drying. Cosmetic water spotting may occur with untreated
water.
•Drying can be done with air, silicone blades, or with clean
Micro-fiber cloths
14
Slide 15
Permanon Supershine
(cont.)
Applied concentration
5-10%, depending on the absorbency level
of the treated surface structure. Higher
porosity/absorbent surfaces require higher
concentrations.
15
Slide 16
Surface Porosity
Open-Pore Surface
(Treated)
Closed-Pore Surface
(Treated)
16
Slide 17
Coating with Silicium
•The positive (+) charge of the monomolecular silicium
induces an electrostatic bond with the surface areas,
which always have a negative (-) charge
•Material surfaces coated with Permanon do not undergo
any chemical reaction.
•Most other surface protection products react chemically
with the surfaces that they treat.
17
Slide 18
Coating with Silicium
(cont.)
No reaction time is necessary, and the product does
not need to be rubbed in or polished.
Application is:
Simpler
Faster
Easier
Less damaging
More economical
18
Slide 19
Coating with Silicium
(cont.)
Competing products usually contain silicon oils or fluoric
silan, combined with polymers and / or solvents as a
carrier.
•Permanon Supershine contains only Silicium Si14 (a
metalloid) and polymers in a water-based solution.
•No oils, siliconized products, or waxes.
19
Slide 20
Coating with Silicium
(cont.)
•Competitors recommend individual products for
different surfaces such as glass, varnished surfaces,
plastic, rubber, synthetic materials, metals, etc.
•Permanon products can be used on all materials
without damage or discoloring.
•Do more without special equipment, training, or
other miscellaneous supplies
•Permanon is sold as a concentrate, competitors are as
much as 50 times more expensive when compared to
Permanon products.
20
Slide 21
Protection Attributes
Resistant from -40ºC to + 300ºC
Resistant against ultra violet (UV) light exposure
Resistant against alkaline up to pH 12.5
Resistant against acid (except hydrofluoric acid)
Resistant against disinfectants
Resistant against H2O2
Anti-fouling effect
Enhanced stain release
21
Slide 22
Benefits of the
Permanon Product Line
Dirt cannot bond tightly to treated surfaces reducing incidence of mineralization
or salt deposition and organic staining
Lowered labor requirements and fewer cleaners required; which results
in lowered cleaning costs
Surfaces are protected from environmental contaminants; extending in-service
life cycle
Non-toxic, no irritants, and biodegradable
Reduces cleaning labor (time) by up to 50%
Improves surface appearance for a longer period of time compared to traditional
methods
Reduces the need to use aggressive and potentially more hazardous cleaners
Permanon products have a pleasant oder that does not require a masking scent
Electro-static bond repels airborne dust; extending cleaning cycles for many
surfaces
22
Slide 23
PERMANON Supershine
• Composition
–
–
Special surface-active polymers
Pure monomolecular Silicium
• Protection properties for
–
All kinds of soiling
–
Reduced mineralization and salt deposits
–
Reduced exhaust fouling
–
UV radiation protection from the sun
–
Special anti-fouling effect (reduced algae formation)
–
Increased transparency of glass panes
–
Protection properties over a period of many months
• Activity
–
–
Polymers bond in an electrostatic manner with the surface and result in an
invisible monomeric protective film at the nano level.
Viewed from a microscopic standpoint, the “rough” surface structure is filled
up and thereby smoothed.
• Toxicology
There are no known adverse effects. Always apply as directed.
23
Slide 24
PERMANON Supershine
• Stainless steel
• Epoxy coated & varnished
surfaces
•
Acrylics
•
Rubber
• Galvanized covering
•
Glass
•
Chrome
•
FRP (fiberglass reinforced plastic)
•
Macrolon
• Non water-soluble paint
•
Polyethylene
• Solid Surface Materials
•
Polytherimid (PEI) U-TempTM
• Composites including carbon fiber
•
Polycarbonate (PC)
•
Polypropylene
•
Polysulfone (PSE) H-TempTM
• Tiles
• Non-ferrous pipes for medical and
industrial gases
• Aluminium
• Leather, Vinyl, Butyl Rubber
24
Slide 25
Pore Surface Structure
Capillary Detail
Surface Capillaries
Capillary
Silicium Layer
Silicium Nano
Platelets
10-9
10-8
10-7
High Contact Angle
(Hydrophobic)
25
Slide 26
Physical characteristics
of a Capillary
Definitions
Capillarity attraction refers to the “wicking” effect that
occurs as a result of a liquids surface tension in narrow
cavities and in pores.
Capillary ascension refers to the rising of liquids within
a capillary, for example water in surface cavities and
pores.
26
Slide 27
Physical characteristics of the
capillary
(cont.)
All materials are porous and possess unique capillary
structures. It is these capillaries that cause “wetting”, a
natural fluid ascendancy. This phenomena is know as
hydrophilic attractive force.
Contaminants such as fine dirt, algae, bacteria, viruses,
fungus, and other pathogens ascend into the capillaries,
where they find an ideal breeding ground.
27
Slide 28
Physical characteristics of the
capillary
(cont.)
• The positively charged Silicium Si14 particles
(platelets) overlap each other, much like fish
scales cover a fishes skin.
• The Silicium Si14 platelets closely follow the
surface contour of the capillary
• Platelets will fill and seal up-to 90% of a
capillaries volume.
• Once coated with Permanon; dirt and other
containments are cut off from entering the
capillaries.
• Follow-up cleaning becomes fast and easy,
improving the overall cleanliness of the surface
with less effort.
Capillary Detail
Silicium Nano
Platelets
10-9
10-8
10-7
28
Slide 29
Electro-static Bond
•An electrostatic bond is induced
through the negative (-) charge of a
surface and the positive (+) charge
of the Permanon Supershine
product.
•No reaction or cure time is
required: as soon as the Silicium
comes in contact with surfaces, the
coating process is completed.
Positively Charged Silicium
Platelets
(+)
ElectroStatic Bond
(-)
Negatively Charged Surface
29
Slide 30
Surface Protection
Permanon treated surfaces and materials are protected
from:
•Day to day wear
•Environmental conditions
•Workplace contamination
This layer of protection preserves the value of your
investment; lowering your overall cost of ownership
30
Slide 31
Surface Protection
•Permanon is a semi-permanent coating. For full
protection reapplication is necessary.
•Permanon will not stick to itself. Permanon will not
build-up with repeated application.
•When reapplying Permanon you effectively target
worn (coating) areas for repair.
31
Slide 32
Compatibility of Material
•Permanon is inert and will not react with surface materials
other than to electro-statically bond to them.
•Permanon is safe to apply to any solid surface
•There is no chemical reaction between Permanon and the
treated material(s).
32
Slide 33
Environmental Profile
“Monomolecular Silicium and its decaying
components are non-polluting”
•Permanon products contain no VOC’s and require no
respiratory or personal protection products for mixing or
application.
•Permanon is Non-Flammable, Non-Toxic, and Biodegradable
33
Slide 34
Surface Cleanliness
•Partial capillary sealing with Silicium allows surfaces to be
more easily and completely cleaned than untreated surfaces.
•Viruses, bacteria, fungus, algae and other pathogen will not
be able to find an ideal breeding ground, which slows
pathogenic reproduction.
•Any soiling, including pathogen germs, now remain on the
material’s surface and can be more easily and more
completely removed in subsequent cleanings.
34
Slide 35
Surface Cleanliness
“All pertinent health and safety
laws/codes as well as normal
disinfection measures need to
observed and followed. Permanon
is not a disinfectant or pesticide.”
35
Slide 36
COPYRIGHT
©
These documents are protected by copyright and unauthorized
distribution or sharing is grounds for legal prosecution.
36
Innovative Surface Protection
Based on Nano-Engineered
Pure Monomolecular Silicium (Si14)
556 Kittyhawk Ave, Auburn, ME 04210
Permanonusa.com 877-294-1849
1
Slide 2
Silicium
Periodic Table Symbol
Si
Atomic Number
14
Mohs Hardness
7
CAS-No.
7440-21-3
Fast Facts:
•Upon contact with air, Silicium builds a passive oxide
film.
•Silicium is the second most frequently occurring
element on Earth (after oxygen), however, it does not
readily occur in its elementary form; it readily combines
with oxygen, forming silicates - for example: sand
(Silicon Dioxide SiO2).
2
Slide 3
Silicium
(cont.)
Silicium Si14, as it is used in Permanon products, is a
monomolecular (pure) Silicium.
•The Si14 protection layer is insoluble in acids, except for
nitric acid containing hydrofluoric acid.
•In a hot alkaline solution Silicium dissolves by forming
hydrogen bonds and transmitting energy.
•Permanon can be easily removed at a pH of 12.5 or
higher
3
Slide 4
Polymers
Definition
A polymer is a macro-molecular material formed by
fusing single molecules into complex molecular
structures.
Polymers can be classified as:
• Co-Polymers: composed of 2 or more types of
monomer building blocks
•Isomeric Polymers: composed of a single type of
monomer building block
4
Slide 5
Products
“To meet the different demands and requirements of
a diverse range of applications, specific combinations of Silicium and Polymers were chosen.”
•The underlying formulation principles are the same in
all products.
•The isomeric and/or co-polymers are optimized and
vary, in a one-digit percentage range, between the
formulations.
•The Silicium Si14 content varies by formulation
5
Slide 6
Products (cont.)
Primary product Lines
• Facilities / Maintenance
– Sanides
– Allround: Supershine, Brilliant
Allround Supershine or Brilliant for all interior/exterior hard
surfaces
Sanides to clean and protect bathroom surfaces day to day
6
Slide 7
Products (cont.)
Primary product Lines
• Marine
– Boat
– Yacht Professional
Boat for all interior and exterior hard surfaces
Yacht Professional is used undiluted for 100% UV Protection
on high value surfaces
7
Slide 8
Products (cont.)
• Primary product Lines
• Automotive/Heavy Equipment
– Car
– Truck
• Car is for passenger and fleet vehicles, interior and exterior
surfaces
• Truck for all industrial and commercial vehicles, interior
and exterior surfaces
8
Slide 9
Products (cont.)
• Primary product Lines
• Aviation
– Aircraft
– Truck
• Aircraft is Boeing Compliant for all exterior surfaces and
is available in up to 1000 liter totes for automated
application equipment
• Truck for all ground support vehicles, interior and exterior
surfaces
9
Slide 10
Potential areas of application for the
Permanon Aviation product line
Civilian Aviation
FBO
Carrier/ Charter
Maintenance
Fuel Trucks
Aircraft Exteriors
Tools
Tugs
Aircraft Interiors
Refurbished Surfaces
Ticketing Areas
Work Stations
Boarding Bridges
New Paint:
Material Handling
Conveyors
Taxi/Bus
Cured- 24 hrs
Uncured- 14 days
10
Slide 11
Products (cont.)
• Primary product Lines
• Pool and Spa
– Pool and Spa
– Allround: Supershine, Brilliant
• Pool and Spa is for commercial and high traffic wet areas
including, interior/exterior pool and shower surfaces
• Allround Supershine or Brilliant is for all interior/exterior
hard surfaces including windows, tables, and trash areas
11
Slide 12
Products (cont.)
• Primary product Lines
• PS Paste
PS Paste is a combination of 16 pure soaps and contains
ZERO abrasives. It is effective on all organic deposits.
Available in 125 gm and 250 gm packaging or bulk sizes
up to 5 Kg.
12
Slide 13
Permanon Supershine
Application of:
•Permanon Supershine is a water-based solution
•Dilute with water to apply a pure Silicium-polymermixture for coating all types of surfaces
•A dust and oil-free surface area is all that is needed
•Apply with an industrial spray system, compression
sprayer, cloth, or by direct submersion.
13
Slide 14
Coating with Silicium
(cont.)
For application of (cont.):
•Rinse to remove water carrier/excess Permanon; it can be
removed with a water hose/power wash or a clean micro-fiber
cloth.
•Using demineralised rinse water eliminates the need for
drying. Cosmetic water spotting may occur with untreated
water.
•Drying can be done with air, silicone blades, or with clean
Micro-fiber cloths
14
Slide 15
Permanon Supershine
(cont.)
Applied concentration
5-10%, depending on the absorbency level
of the treated surface structure. Higher
porosity/absorbent surfaces require higher
concentrations.
15
Slide 16
Surface Porosity
Open-Pore Surface
(Treated)
Closed-Pore Surface
(Treated)
16
Slide 17
Coating with Silicium
•The positive (+) charge of the monomolecular silicium
induces an electrostatic bond with the surface areas,
which always have a negative (-) charge
•Material surfaces coated with Permanon do not undergo
any chemical reaction.
•Most other surface protection products react chemically
with the surfaces that they treat.
17
Slide 18
Coating with Silicium
(cont.)
No reaction time is necessary, and the product does
not need to be rubbed in or polished.
Application is:
Simpler
Faster
Easier
Less damaging
More economical
18
Slide 19
Coating with Silicium
(cont.)
Competing products usually contain silicon oils or fluoric
silan, combined with polymers and / or solvents as a
carrier.
•Permanon Supershine contains only Silicium Si14 (a
metalloid) and polymers in a water-based solution.
•No oils, siliconized products, or waxes.
19
Slide 20
Coating with Silicium
(cont.)
•Competitors recommend individual products for
different surfaces such as glass, varnished surfaces,
plastic, rubber, synthetic materials, metals, etc.
•Permanon products can be used on all materials
without damage or discoloring.
•Do more without special equipment, training, or
other miscellaneous supplies
•Permanon is sold as a concentrate, competitors are as
much as 50 times more expensive when compared to
Permanon products.
20
Slide 21
Protection Attributes
Resistant from -40ºC to + 300ºC
Resistant against ultra violet (UV) light exposure
Resistant against alkaline up to pH 12.5
Resistant against acid (except hydrofluoric acid)
Resistant against disinfectants
Resistant against H2O2
Anti-fouling effect
Enhanced stain release
21
Slide 22
Benefits of the
Permanon Product Line
Dirt cannot bond tightly to treated surfaces reducing incidence of mineralization
or salt deposition and organic staining
Lowered labor requirements and fewer cleaners required; which results
in lowered cleaning costs
Surfaces are protected from environmental contaminants; extending in-service
life cycle
Non-toxic, no irritants, and biodegradable
Reduces cleaning labor (time) by up to 50%
Improves surface appearance for a longer period of time compared to traditional
methods
Reduces the need to use aggressive and potentially more hazardous cleaners
Permanon products have a pleasant oder that does not require a masking scent
Electro-static bond repels airborne dust; extending cleaning cycles for many
surfaces
22
Slide 23
PERMANON Supershine
• Composition
–
–
Special surface-active polymers
Pure monomolecular Silicium
• Protection properties for
–
All kinds of soiling
–
Reduced mineralization and salt deposits
–
Reduced exhaust fouling
–
UV radiation protection from the sun
–
Special anti-fouling effect (reduced algae formation)
–
Increased transparency of glass panes
–
Protection properties over a period of many months
• Activity
–
–
Polymers bond in an electrostatic manner with the surface and result in an
invisible monomeric protective film at the nano level.
Viewed from a microscopic standpoint, the “rough” surface structure is filled
up and thereby smoothed.
• Toxicology
There are no known adverse effects. Always apply as directed.
23
Slide 24
PERMANON Supershine
• Stainless steel
• Epoxy coated & varnished
surfaces
•
Acrylics
•
Rubber
• Galvanized covering
•
Glass
•
Chrome
•
FRP (fiberglass reinforced plastic)
•
Macrolon
• Non water-soluble paint
•
Polyethylene
• Solid Surface Materials
•
Polytherimid (PEI) U-TempTM
• Composites including carbon fiber
•
Polycarbonate (PC)
•
Polypropylene
•
Polysulfone (PSE) H-TempTM
• Tiles
• Non-ferrous pipes for medical and
industrial gases
• Aluminium
• Leather, Vinyl, Butyl Rubber
24
Slide 25
Pore Surface Structure
Capillary Detail
Surface Capillaries
Capillary
Silicium Layer
Silicium Nano
Platelets
10-9
10-8
10-7
High Contact Angle
(Hydrophobic)
25
Slide 26
Physical characteristics
of a Capillary
Definitions
Capillarity attraction refers to the “wicking” effect that
occurs as a result of a liquids surface tension in narrow
cavities and in pores.
Capillary ascension refers to the rising of liquids within
a capillary, for example water in surface cavities and
pores.
26
Slide 27
Physical characteristics of the
capillary
(cont.)
All materials are porous and possess unique capillary
structures. It is these capillaries that cause “wetting”, a
natural fluid ascendancy. This phenomena is know as
hydrophilic attractive force.
Contaminants such as fine dirt, algae, bacteria, viruses,
fungus, and other pathogens ascend into the capillaries,
where they find an ideal breeding ground.
27
Slide 28
Physical characteristics of the
capillary
(cont.)
• The positively charged Silicium Si14 particles
(platelets) overlap each other, much like fish
scales cover a fishes skin.
• The Silicium Si14 platelets closely follow the
surface contour of the capillary
• Platelets will fill and seal up-to 90% of a
capillaries volume.
• Once coated with Permanon; dirt and other
containments are cut off from entering the
capillaries.
• Follow-up cleaning becomes fast and easy,
improving the overall cleanliness of the surface
with less effort.
Capillary Detail
Silicium Nano
Platelets
10-9
10-8
10-7
28
Slide 29
Electro-static Bond
•An electrostatic bond is induced
through the negative (-) charge of a
surface and the positive (+) charge
of the Permanon Supershine
product.
•No reaction or cure time is
required: as soon as the Silicium
comes in contact with surfaces, the
coating process is completed.
Positively Charged Silicium
Platelets
(+)
ElectroStatic Bond
(-)
Negatively Charged Surface
29
Slide 30
Surface Protection
Permanon treated surfaces and materials are protected
from:
•Day to day wear
•Environmental conditions
•Workplace contamination
This layer of protection preserves the value of your
investment; lowering your overall cost of ownership
30
Slide 31
Surface Protection
•Permanon is a semi-permanent coating. For full
protection reapplication is necessary.
•Permanon will not stick to itself. Permanon will not
build-up with repeated application.
•When reapplying Permanon you effectively target
worn (coating) areas for repair.
31
Slide 32
Compatibility of Material
•Permanon is inert and will not react with surface materials
other than to electro-statically bond to them.
•Permanon is safe to apply to any solid surface
•There is no chemical reaction between Permanon and the
treated material(s).
32
Slide 33
Environmental Profile
“Monomolecular Silicium and its decaying
components are non-polluting”
•Permanon products contain no VOC’s and require no
respiratory or personal protection products for mixing or
application.
•Permanon is Non-Flammable, Non-Toxic, and Biodegradable
33
Slide 34
Surface Cleanliness
•Partial capillary sealing with Silicium allows surfaces to be
more easily and completely cleaned than untreated surfaces.
•Viruses, bacteria, fungus, algae and other pathogen will not
be able to find an ideal breeding ground, which slows
pathogenic reproduction.
•Any soiling, including pathogen germs, now remain on the
material’s surface and can be more easily and more
completely removed in subsequent cleanings.
34
Slide 35
Surface Cleanliness
“All pertinent health and safety
laws/codes as well as normal
disinfection measures need to
observed and followed. Permanon
is not a disinfectant or pesticide.”
35
Slide 36
COPYRIGHT
©
These documents are protected by copyright and unauthorized
distribution or sharing is grounds for legal prosecution.
36