Transcript The Easy Fit An Alternative Energy Solution for Medical Waste The Easy Fit Concept The industry for the treatment and disposal of waste.

The Easy Fit
An Alternative Energy Solution for Medical Waste
The Easy Fit Concept
The industry for the treatment and disposal of waste from hospital
institutions is an ever increasing challenge; risk of infectious
diseases migrating outside the facilities; integrity of confidentiality;
costs of disposal; odour migration.
The Easy Fit technology is a solution that mitigates
these challenges
The Easy Fit Concept
The Easy Fit technology is a unique, one-of-a-kind, 1 tonne per day
(2,662 lbs) system that is unparalleled in concept and capability to
convert waste and garbage materials into thermal energy and over
400 litres per day of hot water.
In a process that is as clean as if the thermal energy was produced
by natural gas.
The Easy Fit Concept
The Easy Fit meets the growing desires of Hospital Trusts who are
now encouraging the control and responsibility of energy
consumption and carbon reduction.
With low cost, low maintenance, ease of use, plus the Easy Fits’
ability to convert waste to energy AT SOURCE, the Unit will provide
a hospital with a valuable disposal option for waste.
The Easy Fit Concept
The system requires minimal resource, space and staff time
further reducing the costs for waste management.
Typically, the amount of medical waste could be lower if not
contaminated by general waste which increases the overall disposal
costs. The Easy Fit technology solves this problem by processing all
of the waste categories regardless of cross contamination.
The Easy Fit Concept
The technology has the ability to process each of the five waste
categories; medical, bio-hazardous, confidential, pharmaceutical
and general waste onsite and at the same time is 100% energy
efficient.
The Easy Fit Concept
The units’ ultra low emissions are typical to that of a high efficiency
natural gas boiler of the same size in thermal capacity. No unsightly
stacks are required, only an exhaust vent with an exit temperature
of approximately 70 degrees Celsius.
The Easy Fit Concept
The Easy Fit solution achieves the highest levels of protection
against migration of infectious diseases and pathogens from
hospitals, virtually eliminates high cost disposal fees, reduces
odours over current practices and produces a net energy balance
during operation for energy input requirements
The Easy Fit Concept
QUICK FACT
Small Footprint. 50 sq metres
Height <3 metres *
* Subject to Vent height over
building
The Easy Fit Concept
QUICK FACT
Incorporates the
“NO FLAME” Technology
The Easy Fit Concept
QUICK FACT
Incorporates S.M.A.R.T technology.
Self Monitoring, Analysis and Reporting
Technology.
The Easy Fit Concept
QUICK FACT
Cost less than £420,000 Pounds
( US$ 675,000 )*
* Target Cost . Excluding Delivery, Connections
Four Benefits to installing an Easy Fit
Localised onsite waste disposal to energy solution
Financial viability
Low entry cost
Fast permitting approvals; quick implementation time
Treatment
for the
Environment
too!
No
indirect
use of
Landfill
Use of the
Calorific value
in the Waste
Reduced
indirect use of
Fossil Fuel
• Transportation
Expected Period of Debt Recovery Vs Tip Fee Revenues in
Sterling
Based on the Purchase
price of the Easy Fit, plus
estimated delivery and
install cost the graph
illustrates the possible
period of time it would
take to pay for the
installation from Tip Fee
cost.
£200
£225
£250
£300
£325
£350
£450
0
2
4
6
Years
8
Expected Period of Debt Recovery Vs Tip Fee Revenues
US Dollars
Based on the Purchase
price of the Easy Fit, plus
estimated delivery and
install cost the graph
illustrates the possible
period of time it would
take to pay for the
installation from Tip Fee
cost.
$325
$350
$400
$450
$500
$550
$650
0
2
4
6
Years
8
EPC Wrap
can be
included, the
last piece of
the jigsaw
BE SURE TO VISIT US ONLINE
Dedicated Technology Site
WWW. The-EasyFit.com
Corporate Site
WWW. CHP-Ventures.com