Labour Intensive Asphalt Road Construction & Maintenance INTRODUCTION: Cold Bond MAINTENANCE & PROJECTS We are a company involved in the supplying of quality products used in the.
Download ReportTranscript Labour Intensive Asphalt Road Construction & Maintenance INTRODUCTION: Cold Bond MAINTENANCE & PROJECTS We are a company involved in the supplying of quality products used in the.
Labour Intensive Asphalt Road Construction & Maintenance
INTRODUCTION:
Cold Bond
MAINTENANCE & PROJECTS
We are a company involved in the supplying of quality products used in the tarring and sealing of roads
OUR VISION
•
Set a new standard with regard to the tarring and sealing of roads in a labour intensive way
•
Commitment to the empowerment of previously disadvantaged communities through training and employment creation
•
Commitment to improve the quality of life of the poor by providing a quality product and service
OUR MISSION
•
Be at the forefront of labour intensive tarring and sealing of roads
•
The development and manufacture of environmentally friendly, innovative products that lasts
•
To reduce road maintenance cost
•
Create & build partnerships with:
– – –
municipalities local contractors local communities
INVOLVEMENT OF LOCAL COMMUNITY
Preference given to:
– – – –
Unemployed Unmarried Mothers Youth Disabled Persons
Local contractors are trained in:
• • • • • • •
Traffic Management Safety Use & maintenance of tools & equipment Job layout & planning Product application (theory & practical) Teamwork & conflict resolution General administration
POINT TO REMEMBER
The life span of a road is increased dramatically with regular maintenance and proper storm water management
Cold Bond
PRODUCTS & SERVICES
Cold Bond rejuvenator sealant Cold Bond cold lay asphalt surfaces Cold Bond ready mix bags
ABOUT THE PRODUCTS
Cold Bond
cold lay asphalt
is designed for sealing of medium traffic roads, parking areas, airport aprons, taxi & runways.
Cold Bond
cold lay asphalt
can be applied on new roads or as an overlay on existing roads Cold Bond
cold lay asphalt
can be safely mixed on site in measured volume batches using hand operated equipment (e.g. mobile concrete mixer).
NO HEATING REQUIRED
THE PRODUCTS.
Cold Bond
cold lay binder
is a 60/70 penetration grade bitumen mixed with recycled rubber in liquid form.
The
Binder
adapts to almost all crusher dust and crushed stone sorted at local quarries.
The
Binder
is delivered to site in 200 liter drums and mixed on site with pre-measured aggregates.
THE PRODUCTS.
Cold Bond
coat
is a bitumen based rejuvenator / sealant, modified with liquid rubber which can be hand or spray applied.
Cold Bond
coat
is the ideal product for preventative maintenance of deteriorating bituminous surfaces.
Cold Bond
coat
will penetrate the existing bituminous surfaces, filling hairline cracks and replaces lost hydrocarbons preventing water and ultraviolet rays from penetrating the surface.
THE PRODUCTS.
Cold Bond
cold lay ready mix asphalt bags
• Two part mix supplied in a plastic bag containing the correct mix of aggregates and a second plastic pouch containing the binder. • The product is mixed on site at ambient temperature using conventional hand tools (Spades, shovels, wheelbarrow) or mobile concrete mixer. • The two parts combined weigh 25Kg.
ADVANTAGES OF THE PRODUCTS 1. Quality
surpasses
many
other products of its kind currently on the market.
2. Compares
with a hot premix.
3. Good workability
– easy to apply/user friendly and safe
4 Labour intensive application.
• One(1) team of twenty (20) people can complete between 200-300 m
2
per day.
• Number of teams are determined by the duration
5.
of the contract.
“Ride ability”
of the finished surface.
6. Drastically
reduces
maintenance
on gravel and tarred roads.
7. Price
vs. quality.
ADVANTAGES OF THE PRODUCTS
8.
No heating required –
delivered, mixed and applied at ambient temperatures (product is free of emulsions).
9. Minimal delays due to weather –
apply winter and summer, hence earlier start to working day and no wastage.
10. 60/70 pen grade bitumen
has a much higher melting point than other similar products therefore much more durable in hot areas.
11.The product will dry/cure for the surface to be opened to traffic within 2 - 4 hours after application-
without it being picked up by the wheels of passing traffic or “streaking”.
12. Low capital requirements and set-up costs –
compacted by means of a hand compactor or roller (no vibration required).
THANK YOU
Contact : Head Office:
Trusty Sithole Wimpie van Zyl Deon Janse van Rensburg
0860 10 52 32
082 306 8855 082 459 3317 082 373 2918
Fax: 0866 54 56 35
www.teletechgroup.co.za
128 Blyde Ave Sinoville Pretoria 0182 PO Box 14918 Sinoville Pretoria 0129 Reg: 2003/022861/07 VAT: 4330208242