Transcript Vacuum Box Systems Vacuum Box Vacuum Box Leak Detection Systems Vacuum Box To compliment our tank inspection equipment, Silverwing manufacture an extensive range of vacuum box systems Vacuum.

Vacuum Box Systems
Vacuum Box
Vacuum Box Leak Detection Systems
Vacuum Box
To compliment our tank inspection
equipment, Silverwing manufacture
an extensive range of vacuum box
systems
Vacuum Box
Vacuum Boxes are available for both
floor-plate lap welds and shell to
annular welds
Vacuum Box
The open edge of the vacuum box
incorporates a soft but hard wearing
neoprene seal so a vacuum can be
generated within the box
Vacuum Box
All vacuum boxes are fitted with a
calibrated vacuum relief valve to
prevent damage or injury due to
excessive vacuum.
Vacuum Box
Two main types of Vacuum Box
systems are available:
Standard High Pressure models
produce a vacuum of 20 inch Hg
for detection of smaller leaks
Vacuum Box
Two main types of Vacuum Box
systems are available:
low pressure models produce a
vacuum of 10 inch Hg and are best
suited for new tank builds where
large leaks are the main concern.
Vacuum Box
Vacuum boxes can be
configured to run from
an electric vacuum pump or
from a compressed air supply
Vacuum Box
The V600E electric vacuum pump
eliminates the need for a
compressor
Vacuum Box
The simple Vacuum Box test is
highly effective and provides a rapid
and economic way of evaluating the
Integrity of all types of weld
Silverwing
www.silverwinguk.com
NOT OPERATOR
TECHNOLOGY
DRIVEN
DEPENDENT