Transcript for a PowerPoint presentation of our products and

Design and manufacturing of communications/alarm
electronic circuits
Founded in 1998, Jsm Micro Inc is located in Montreal Quebec.
JSM specialize in protocol conversion technologies and in design of innovative
electronic circuits for the telecommunications industry.
JSM also design, manufacture and sell its own products for the following applications:
Alarms contacts opening / closure detection and management.
Aged people residential complex emergency call systems.
Visual nurse call systems for nursing homes, hospitals, and health care related facilities.
Staff security systems for hospitals, psychiatric care units, court houses ...
Zone paging systems for telephone systems.
Protocol converters for pocket paging or wireless phone systems.
Messaging systems (MSF) for cordless DECT phone systems.
Overview
JSM Products
Overview
The WSX1 CPU unit is used in protocol converter applications or as a central
control unit for applications involving IO32A & IN32B circuits. The CPU unit
will work according to the appropriate application software. It is usefull with
all JSM Micro products.
Features
16 bits microprocessor
50 mips coprocessor
Watchdog supervisor
Real time clock, li-on cell
FLASH 512k
RAM 2 x 512K
JSM buss
9 VAC powered
12 VDC power output
5 serial ports RS-232 / RS-485
Parallel bidirectional port
Light grey cold rolled steel enclosure
Cage Clamp (no screw) connectors
WSX1

CSX5: RISC type CPU module
CSX5 modules can be networked together and also with the WSX1 controller. Each
module can execute a different task according to software used. Software are available
for the following messaging functions : TAP input, MEP input and generic (configurable)
serial input. Software is also available to network modules together. The networking
software will offer a MEP or TAP serial output. The modules can also be hooked to the
WSX1 controller and used for messaging (MSF) with Multitone, Kirk DECT and
SpectraLink phone systems.
50 mips micro controller driven
4k program memory
128k – 1meg RAM memory
512k FLASH memory
RS232 port with RTS/CTS
RS485 networking port
Configuration by RS232 serial port
Reset button & L.E.D. indicator
Brownout and watchdog reset
Off-white painted steel enclosure
9v ac or 12v dc supply
CSX5
CSX5-ENC : Pocsag paging
encoder module
CSX5-GEN : Generic serial input
module
The CSX5-ENC module is used to network
other CSX5 modules together, thus forming a
paging system. The module can be
configured for 512 or 1024 bps output, signal
and inhibit polarity. Eight optoisolated inputs
can transmit an alarm or restore message.
Other CSX5 modules are added to network
to provide protocols inputs: TAP, MEP, COMP
or GENERIC to extract messages from serial
RS232 data ports.
Networked CSX5-GEN modules are used to
capture serial strings, (mainly formatted printer
outputs), qualifies them, extract information
from them and form a destination and a
message using user supplied set of rules. This
message can then be send to pagers or DECT
phones.
CSX5-TAP : Tap input module
Networked CSX5-TAP modules are used to add
a TAP port to either a paging system or a DECT
phone system. There is one TAP input port per
networked module. The RS232 TAP port is
configurable
for
baudrate,
parity
and
handshaking. A timed manual entry mode is also
available on the TAP port by pressing . User is
prompted for a pager number then for a
message.
CSX5-MEP : Mep input module
Networked CSX5-MEP modules are used to
add a MEP port to either a paging system or a
DECT phone system. There is one MEP input
port per networked module. The RS232 MEP
port is configurable for baud rate, parity and
handshaking. A timed manual entry mode is
also avaliable on the MEP port by pressing .
User is prompted for a pager number then for a
message.
IN32B : optically isolated AC/DC supervised inputs 5 to 30 volts
Monitors electrical signals or mechanical contacts such as lamps, relays contacts, switches,
thermostats, alarms and others. The monitored inputs status is reported to a central controller
via the network where an appropriate action is taken according to inputs stimuli and the
controller’s software. For example, information can be stored, displayed on giant sings, sent to
pocket pagers etc. Each input can also detect steady or flashing signals on the same pin.
Supervised mode steady signals only.
Features
•
•
•
•
•
•
•
•
•
•
•
•
Micro controller driven
Active/Passive protocols
RS485 networked
Field programmable, no PC required.
Accept dry contacts, N.O. or N.C.
Accept voltages 5-30 volts AC/DC
Accept supervised contacts
Active supervision mode, 10 seconds
Optically isolated inputs
Light grey cold rolled steel enclosure
7.5 to 12 volts DC powered
Cage Clamp (no screw) connectors
IN32B
RTU8: Room Station Controller
• The RTU8 module is used to detect troubles and calls from room and bathroom stations
hooked up. It also controls corridor lamps. The module is compact and is designed to be
installed near the rooms to minimize costs and ease the installation. Only one
data/power cable (cat5) is needed to daisy-chain connect RTU8 modules together. Each
RTU is independant, thanks to his microcontrolers. Address programming is made easy
using one single button. A heartbeat LED indicates correct operation.
Features
•
•
•
•
•
•
•
•
Compact
Fully supervises room stations and detects troubles
Keeps operating locally in case of connection lost
Can be powered locally or through the data cable
Modules can be joined without external cables
LED indicator
All wires can be quickly disconnected
Addressable
RTU8
Overview
Usefull with the RTU8, the RTU8-BEXP and PL2014B-BEXP are using three power
distributors wich create an additional possibility of connections. Those units can detect
troubles and calls from room and bathroom stations. Many red LEDs indicates if the data
is available at each RJ45 connector. Each PL2014B-BEXP is independant and uses its
own microcontrollers. Il also has a data repetitive chip and a white flashing Del who
indicates if the data is going through the PL2014B (scrolling display).
Features
• Compact
•
•
•
•
•
•
•
Fully supervise room stations and detects troubles
Keeps operating locally in case of connection lost
Can be powered locally or through the data cable
Modules can be joined without external cables
Many LED indicators (red and white)
All wires can be quickly disconnected
Adressable
RTU8-BEXP and PL2014B-BEXP
Overview

The main function of this unit is to show messages and to generate audible alarms.
It is controlled directly by our CPU unit (WSX1). This device is a fundamental part in
the RTU system, adding monitoring capabilities to your system. It is able to sense if
there are problems in the date transmission and power levels. In the case of a power
failure, the unit will generate an alarm. It verifies the reception of the date and if
there are no new supervisory data in couple of minutes it will generate a
communication error. In both cases, the user can deactivate the alarm and notify
the problem to your team. It can be installed over the wall or over your desk. It is
powered through a CAT5 cable.
Features
•
•
•
•
•
•
•
•
•
Compact
Communicates directly with the WSX1
Alphanumeric display. 20 x 4 characters
Shows time and date, and a
customize message in the idle state
Shows alerts and problems with audible alarms
LED indicator
Monitors power supply and communication
Configurable (adress, language, volume, mute..)
Back-up battery
RTU8-DISPL
S
FTWARE PR
DUCTS










Manage database files containing
downloaded report information from
WSX1
View data in a clear and flexible way
Quickly sort data by simply clicking on
the appropriate column header
Make quick searches to quickly find
something
Launch advanced queries to look for
certain patterns for analysis and
reporting purposes
Quickly generate print-ready reports
for anormal situations, statistics,
room call listing, etc.
Download report information from
Jsm Micro inc. WSX1 units
Copy and export data to external
programs such as Microsoft Excel
Act as a server in a network; multiple
users can connect to the same
database and query it
Auto-launch when Windows starts and
periodically check for updated report
information
JSM Report

Designed to monitor resident's
presence : make sure every resident is
safe

Works with push buttons : if residents
do not press within a certain time
frame, an alarm is reported

Quickly get an overview of residents'
personal information and current status

Add custom details to residents'
profiles such as phone number and
remarks

View an history of the events that
occured for each resident

Receive graphical alerts on-screen for
alarms and intrusions
JSM Presence

Works using infrared
motion sensors : if a
certain time period
elapses, an alarm is
reported

Gather presence data
from multiple COM ports

Define absence periods to
disable alarm reporting
for a given time lapse if
the resident plans to go
away

Intrusions can be
reported if motion is
detected during an
absence period

Transmit notifications to
pagers and email
addresses if alarms and
intrusions are reported
JSM Presence

SS-Messenger allows you to built messages and send them
to pagers, scrolling displays and wireless phone. It is
based on a user defined set of rules applied to a captured
text string.

SS-Messenger can be
adapted to any system that has a
serial port, whether a fire alarm system, intrusion or nurse
call.

The serial port can be output to a printer or pagers.
SS-Messenger
CID Messenger - Caller-ID call management software

Several kind of telephone emergency calling devices exist on the market today.
Majority of them use analog lines and dial pre-programmed phone numbers to
report previously recorded alarm messages to users. These units can dial
several times the same number and escalate to a second number until
somebody answers the call and dial a code to reset the unit or hang-up (if the
unit can detect the disconnect signal) or until there is a timeout if nobody
answers. The dialers are installed in homes, aged people apartment buildings, care facilities and
even in hospitals. CID Messenger is a firmware who interpret and react to caller-id information.
•
CTD3.x Alarm contacts management software for WSX1 CPU
The CTD3.x software is designed to supervise IN32B alarm contacts input modules and generate
appropriate alarm messages depending on the input type (emergency, code blue, normal call, etc.)
and location using powerful prefix and suffix features. The CTD3.x software can also report alarms
that have been restored. When an event occurs, the software broadcasts messages to whole teams
that can contain alphanumeric displays, pagers and wireless phones. The software has powerful
scheduling capabilities. The CTD3.x software can detect supervision troubles and broadcast
messages if some troubles arise. It will also accumulate calls that can be retrieved using Jsm Report.
WSX1 firmware
•
SCPMessenger - Staff Call Pro Integration
The SCP Messenger software is used to detect calls from StaffCallPro systems and generate
alarms, build and dispatch alarm messages to displays, pagers, wireless phones. Alarms are
broadcasted to whole teams that can contain displays, pagers, Kirk or SpectraLink phones. The
SCP Messenger software also has important scheduling and filtering capabilities : calls can be
dispatched to different groups based on the time and the day of the week and based on the nature
of the call. It is configurable using the powerful template-based Jsm Config software. It will also
accumulate calls that can be retrieved using the Jsm Report reporting software to prepare reports
and statistics.
•
RTU8 Messenger - Call Management Software
The firmware polls RTU8 controls and detects calls coming from room and bathroom stations. It can
generate alarms, build and dispatch alarm messages to teams containing displays, pagers, wireless
phones. Calls can be dispatched to different groups based on the time and the day of the week and
based on the nature of the call. The software is configurable using the powerful template-based Jsm
Config software. It will also accumulate calls that can be retrieved using the Jsm Report reporting
and statistics software. It can also route data to Jsm Presence to make sure residents are safe in
their appartment.
Visual Call System
Specialized in senior residences









RTU-Messenger
Direct connection with smoke and
mouvement detector (JSM Presence)
Bathroom pull cord station
Call bed station
Fully supervised
Corridor lam
Reports/stats.
Pagers
Scrolling display






Can integrate most nurse call systems (alarm / fire system
with serial port)
-Austco
-Télécor
-Rauland
-Équinoxe
-Ect…
Pagers
Scrolling display
Phones
Statistical and report software
Flexible configuration
System integration
• JSM Report
• JSM Display
• JSM Presence
• JSM Config
• Page Com
• JSM WSX1 monitor
• The health professional will be well
equip to answer all patient’s needs.

You have products that are design and
manufacturing in Quebec, Canada
JSM Micro Inc.
2711 Des Ormeaux,
Montreal, Quebec
H1L 4X6
Tel: 514-655-5731
Fax: 514-355-9616
Web: www.jsmmicro.com
[email protected]