Transcript JAQUET AG
04-04 www.jaquet.com JAQUET Products for VG-Turbochargers and Turbobrakes 1 04-04 Mission Statement To design, manufacture, market and service both standard and customized products that detect, measure, diagnose and control SPEED under any circumstances. To create a competitive edge for our customers’ To be dedicated to excellence and continuously develop innovative new solutions 2 www.jaquet.com applications, and secure high quality and reliability standards 04-04 Markets served Mobile Hydraulics Speed-Measurement Overspeed Protection Position Control Gas- Steam and Water-Turbines Speed measurement Pole wheels and Pole bands Speed-Sensors for all applications Overspeed Protection Railway Systems 3 Brake Control Feedback Loop for Propulsion System Door Interlock Black Box Information www.jaquet.com Diesel- and Gas-Motors Cam- and Crank-Shaft speed Turbocharger Speed Overspeed Protection Engine Diagnostics Industrial Applications i. e. Textile machines Speed of Spinning Head Operator Protection Automotive Applications 4 Speed of VG Turbocharger Cam- and Crank-Shaft speed Engine Diagnostics www.jaquet.com 04-04 Markets served 5 The JAQUET Technology Group has 4 basic designs of speed sensors for these applications: VR-Sensor standard VR-Sensor LC HF-Sensor „NOVA / ECON“ EC-Sensor “HERMES” www.jaquet.com 04-04 Speed Sensors for Turbochargers 04-04 VR-Speed Sensor Standard Various executions Also for small quantities Large field experience in medium to high temperature applications Shielded Teflon cable for connection Coil on former technology 6 www.jaquet.com Detecting a flat on a steel shaft Standard 04-04 VR-Speed Sensor Option: With plastic housing (PPS) for www.jaquet.com temperatures up to 390°F / 200°C 7 Standard 04-04 VR-Speed Sensor Option: With stainless steel housing for www.jaquet.com temperatures up to 570°F / 300°C 8 Standard 04-04 VR-Speed Sensor Option: www.jaquet.com With line amplifier in the connector 9 low cost 04-04 VR-Speed Sensor Medium or high temperature applications Detecting a flat on a steel shaft Free Teflon wires for Coil on former technology 10 www.jaquet.com connection low cost Epoxy body for lowest cost (temperature limit 390°F / 200°C) Open lead wires in Teflon quality AMP (or customer required connector) 11 www.jaquet.com 04-04 VR-Speed Sensor low cost Stainless steel housing for temperatures up to 570°F / 300°C Open lead wires in Teflon quality AMP (or customer required connector) 12 www.jaquet.com 04-04 VR-Speed Sensor 04-04 HF-Sensor ECON HF-Technology Detecting the blades of the compressor impeller Shielded Teflon cable for connection Coil on former technology 13 www.jaquet.com Electronic signal treatment in the connector ECON www.jaquet.com 04-04 HF-Speed Sensor 14 HERMES 04-04 EC-Speed Sensor A new generation of “Eddy-current” Speed Sensor for VG-Turbochargers in Passenger Cars 15 www.jaquet.com „HERMES“ HERMES 04-04 Structure of inner parts A robust coil system is connected to the shielded lead wire cable EPOXY Temperature resistance of sensor head = 390°F / 200°C 16 www.jaquet.com All inner parts are over moulded with HERMES 04-04 Structure of inner parts A 3 pin AMP superseal-connector containing signal treatment electronics Additional functionality as per Cable entry and electronic is protected by a thermelt over-mould 17 www.jaquet.com definition 04-04 Speed Sensor Properties HERMES 5 VDC power supply; square wave output signal Able to detect Aluminum and Titanium blades of small dimensions Suitable to detect speed values up to 300’000 min-1 at 8..10 blades of compressor wheel Proven solution for Turbocharger applications 18 www.jaquet.com Very robust construction 04-04 Mounting position / main dimensions Diameter of tip end about 5 mm Length of nose min 30 mm Bracket for fixing screw M5 Cable diameter ~ 5 mm, typical length 300 mm 19 www.jaquet.com Ready to be mounted in the compressor housing 04-04 Thank you for your attention 20 www.jaquet.com JAQUET Products for VG-Turbochargers and Turbobrakes