Transcript File - HomeCare Sales Consultants

Disc Disease Solutions, Inc
Training and Certification for
DDS 500 Instructors and Fitters
Disc Disease Solutions, Inc
Objectives
• Comprehend the Purpose of The DDS 500
• Demonstrate Proficiency in the Application of
The DDS 500
• Understand the Features and Functions
Disc Disease Solutions, Inc
The DDS 500
DDS 500 Ambulatory Spinal-Air Decompression
Air Traction Belt
100% Cotton Lining
Posterior (Rear) Rigid Panel
Air Valve 
Anterior (Front) Rigid Panel
Hand Air Pump
Also comes with a laundry bag and user manual
Disc Disease Solutions, Inc
What is it & How does it work
The DDS 500 is thin, lightweight and easy to use; it offers a high degree of mobility,
alleviating, treating and preventing back pain. It can be discreetly worn under clothing
allowing you to perform daily activities such as driving, walking and standing for long
periods of time, and enabling those with an active lifestyle to work, enjoy sports and other
leisure activities pain-free.
It acts to provide traction between the lower part of the rib cage and the upper
part of the hip effectively reducing pressure in the lumbar spine. The vertically
expandable columns create a virtual support beam providing spinal decompression
for the lumbar vertebrae successfully eliminating lower back and radiating pain.
Disc Disease Solutions, Inc
What is it & How does it work
Before Treatment
Pain is caused by applied pressure from the herniated or bulging intervertebral disc,
or nucleus pulposus.
After Treatment
By increasing the intervertebral space, pressure applied on the nerve root is relieved
naturally reducing pain.
DDS alleviates pain and assists active-rehabilitation by allowing the intervertebral
disc, or nucleus pulposus, back to its natural position.
Disc Disease Solutions, Inc
What is it & How does it work
Spinal traction is created upon inflation of the belt. The vertical air cell expansion
mechanism decreases axial loading while increasing the intervertebral disc space.
*The belt will anchor up underneath the rib cage pushing upwards and down
against the pelvic girdle (hip bones) stretching the torso vertically. This action will
reduce pressure within the lumbar spine region significantly reducing pain levels.
Disc Disease Solutions, Inc
Fitting & Measuring
The DDS 500 ranges in 8 different sizes from size small to 5XL, accommodating measurements
from 25” to 52” and even up to 58” with the DDS Extension.
The most accurate measurements for the DDS 500 will be found around the umbilical/navel
region and NOT the patient’s pant size.
Measurements should be taken while the patient is standing unless he/she is in a wheelchair.
The following is a chart that includes waist measurements and panels sizes corresponding to belt size:
Size
S
M
L
XL
2XL
3XL
4XL
5XL
Waist Measurement
26-28 Inches
29-32 Inches
33-35 Inches
36-38 Inches
39-41 Inches
42-44 Inches
45-47 Inches
48-51 Inches
*Larger sizes available – up to 58” with the DDS Extension
Panel Size
S
M
M
M
L
L
XL
XL
Disc Disease Solutions, Inc
Fitting Procedure
1 Deflate the device by
turning the Air Valve
counterclockwise.
Upon complete deflation,
turn the Air Valve clockwise
until the Valve is fully
locked.
2 Posterior/Rear
Panel - Thread the Belt
through the inside of
the posterior panel.
Disc Disease Solutions, Inc
Fitting Procedure
3 Anterior/Front Panel - Attach the Front
Panel to the Supplemental
Velcro Strap.
4 Wrap the device
around the abdomen with
the DDS logo in the center
and upright position,
attaching first the Primary
Velcro Enclosure.
It is very important to position the Brace within the concavity of the patient’s lumbar spine so that the brace is sitting
above the patients hip bones and under their rib cage. The Posterior Panel must also be centered with the spine
aligned evenly with the patient’s back. Similarly, the Anterior Panel must also fit centered on the patient’s abdomen.
Disc Disease Solutions, Inc
Fitting Procedure
5 Proceed to tightly fasten the Secondary Velcro Strap. The Belt
should rest precisely between your hip/pelvic bone and your ribcage
Important : The device should be close-fitting, secure and comfortable.
6 Connect the Hand Air Pump to the Air
7 Proceed to use the Hand Air Pump to
Valve. Make sure to connect the air
injection tongs exactly with the Air
Valve.
inflate the belt until the gauge reaches
the green-orange area(10-14 psi) on
the Hand Air Pump indicator.
Removing DDS: You MUST release the air completely out of the device before removal.
You can do so by unscrewing the Air Valve.
Disc Disease Solutions, Inc
Fitting Procedure
The DDS 500 LSO Brace is designed for both short-term use on patients with
acute conditions such as lumbar strain/sprain and for long-term use on patients
with chronic conditions such as lumbar disc bulge, disc herniation, disc protrusion,
disc degeneration, lumbar facet syndrome, etc.
Duration of use should be commensurate with the duration of pain and discomfort.
Suggested wear time is approximately four to five hours per day. It is recommended that
the brace be worn during the patient’s most challenging times of the day. Patients
may find optimal results by splitting up the time they use the brace into two or more
time periods, such as by wearing the brace for two or three hours in the morning
and two or three hours in the afternoon and/or evening.
It is not only possible but recommended that patients use the brace (without the
panels) while doing core strengthening exercises.
DDS may be worn directly on your skin or over a thin cotton t-shirt.
If allergies persist, consult a physician.
Disc Disease Solutions, Inc
Features
•
Treatment for bulging and herniated discs. Helps eliminate lower back and radiating pain
in the hips, thighs, legs and/or feet. Bulging and herniated discs are reduced by elongating the
intervertebral spaces in the lumbar spine.
•
Relaxes muscle spasms, muscles cramps, strain and pain.
•
Helps treat degenerative disc disease, spinal stenosis, sciatica and spondylolysis.
•
Helps maintain proper posture. Improper posture places the upper body weight directly on
the discs and causes back pain.
•
Assists individuals with strenuous jobs requiring heavy lifting or long hours of driving.
•
Can be worn discreetly under clothing.
•
Very lightweight, comfortable and allows nearly a full range of motion.
•
Made of highly durable, 100% soft cotton material.
•
Simple to use.
Disc Disease Solutions, Inc
Features
THE DDS 500 is especially unique and effective because of the detachable rigid
panels. The DDS 500 offers a solution for patients who cannot tolerate the discomfort
of a rigid body jacket yet require similar support. It is exceptionally valuable for pre
and post surgery, providing with equal stability as a stiff body jacket without the
discomfort.
As the patient progresses and requires less support, the detachable rigid panels can
be removed to create a semi-rigid support with one or no support panels. It easily
converts to a soft LSO and provides greater flexibility.
Disc Disease Solutions, Inc
Contraindications
1 Patients with any of the following health conditions
should notify their physicians before administering DDS:
• abdominal or chest compression
• cardiovascular diseases: uncontrolled hypertension,
aortic aneurysm, congestive heart failure
• cerebrovascular diseases
• major spinal surgery
• severe osteoporosis
• tumor near lumbar region
2 Do not use if pregnant.
Precautions
1 Do not exceed 15 psi while inflating DDS with the Hand Air
Pump.
2 Handle with care; dropping the Hand Air Pump can result in
malfunction.
3 Do not place sharp objects hear the DDS Belt.
4 Shut the air valve tightly before machine wash. Water must
not enter the Device.
Disc Disease Solutions, Inc
Washing
1 Deflate device completely and turn the air release nozzle
counterclockwise to shut tightly. Water MUST NOT enter the
device.
2 Place DDS in the included mesh laundry bag to prevent damage.
3 Use neutral detergent and select a light cycle.
4 Air dry in the shade. Only use when completely dry.
Disc Disease Solutions, Inc
Summary & Review
1. Where are the most accurate measurements taken on the patient?
2. When should the brace be worn? And for how long?
3. Which two body parts should the DDS 500 fit between?
3. Can the brace be worn without the panels?
4. Is the DDS 500 designed for short-term use or long-term use?
Disc Disease Solutions, Inc
Summary & Review
Locate all parts of the DDS 500
1. DDS Belt
2. Air Valve
3. Anterior Panel
4. Posterior Panel
5. Hand Air Pump