Transcript Staged Compression - Solar Cool Energy

Next…
Why SolarCool saves
so much energy…
Next…
Staged Compression
System in normal run process
Expansion
Valve
Condenser
Compressor
Assuming full load
requirement, all compressors
will run.
Evaporator
Next…
Staged Compression
System with SolarCool
SolarCool
Expansion
Valve
Compressor
The panel absorbs the UV radiance from
the sun. The vacuum tubes become
internally hot and therefore heat the
refrigerant gas as it passes through
Condenser
Evaporator
Next…
The
Chemistry
SolarCool
When the sun heats the gas it is provided with
thermal energy, which in turn raises the internal
energy (the sum of all microscopic kinetic and
potential energy of the molecules) the
molecules move with a higher value of kinetic
energy which simply implies each molecule
moves with a higher velocity than before.
SolarCool
As the molecules collide with one another
they rebound with higher energies,
moreover intermolecular forces weaken
and the molecules space out further
which results in an increase in volume.
SolarCool
Cont…
Staged Compression
System with SolarCool
Most…if not all of the pressure
produced from the additional heat is
released in mass volume flow and
therefore substantially increased
molecular velocity
Increasing the
ΔT
between condensing
and ambient
temperatures, effectively
increasing the surface
area of the condenser
SolarCool
Expansion
Valve
Yielding a reduced energy demand, as the
compressors begin to shut down as
SolarCool takes over the load requirement
Condenser
Compressor
Evaporato
r
No other system on the planet offers this kind of efficiency
Next…
Very important
Those who may be concerned how the
condenser addresses any additional heat
generated by SolarCool:
10kW system without SolarCool
First and foremost, the systems condenser is designed to
manage the compressors running at full load. The reality is
when the sun is in the sky (the time when most systems run
at full load), SolarCool will ensure that all compressors
virtually never run at full load.
Of course it would be fantastic to achieve the additional
efficiency without additional heat, but the additional heat is
the price we pay in return for the higher efficiency. We
actually want the heat from the solar panel, utilising the heat
(temperature not pressure) we increase the gas molecules
kinetic energy, hence increasing the mass volume flow, and
additionally creating an improved Delta T therefore enhancing
the efficiency of the heat exchanger (condenser).
All Refrigeration and A/C systems are manufactured to a very
specific design point, e.g. for A/C systems ISO 5151. This point
sets the capacities for the compressor, condenser and all other
parts. The facts covered in the second paragraph above allows
SolarCool to easily cope with any additional heat, as is shown
here and further clarified in third party testing data (T after
condenser):
T-discharge
T-after condenser
10kW system with SolarCool
T-after panel
T-discharge
T-after condenser
Next…
Official testing data
(there are many examples of official test
data from around the world on our
website, the following is just one small
example)
Cont…
The illustration below demonstrates the energy usage on a SolarCool DC inverter
system in comparison to an identical A+ rated DC inverter system.
A clear cut case of ‘the hotter it gets’ the less the SolarCool system works’ – and as
importantly the more the comparison A+ system works.
Non solar Inverter
SolarCool
Data Measurement
Cont…
The illustration below is a screenshot of the same live testing facility. Clearly
demonstrating all relevant temperatures and pressure points around the system.
Data Measurement
Next…
Worldwide patented & patent pending technology.
(Unfortunately…we already have credible patent defence case history already
under our belt).
Next…
The future of
heating, cooling &
refrigeration…today!
Visit:
www.solarcoolenergy.com