HOUSING - Proyser Calderería
Download
Report
Transcript HOUSING - Proyser Calderería
The best partnership for your Company
The best partnership for your Company
The best partnership for your Company
The best partnership for your Company
The best partnership for your Company
The best partnership for your Company
The best partnership for your Company
The best partnership for your Company
THE BEST PARTNERSHIP FOR YOUR COMPANY
HISTORY & GOALS INSTRELEC
INSTRELEC is a company established in 2005.
Main Goals:
To achive the clients requirement, working in order to optimize their process, giving profitability to the
project and generating an ADDED VALUE.
We are specialist in giving a multidisciplinary Service & Technical Asistance.
Main areas to delevop the activity:
Oil & Gas Industry
Chemical Industry
Petrochemical Industry
Renewables Energies
The human capital that makes this possible, is a group of Engineers, Technicians and
highly qualified Specialists, with wide experience aforementioned.
THE BEST PARTNERSHIP FOR YOUR COMPANY
INSTRELEC ACTIVITIES
Project Consulting and Feasibility Studies
Engineering, Procurement & Construct (EPC)
Project Management Team (PMT)
Project Management Contracting (PMC)
Conceptual, basic and detailed Engineering in a multidisciplinary level
Administration of contracts.
Open Book Engineering. (OBE)
Suppliers Activities Managing
Multidisciplinary Technical Asistance
THE BEST PARTNERSHIP FOR YOUR COMPANY
OIL & GAS REFERENCES
2006 Engineering & manufacturing of Heat Exchangers.
Unit 3800 ICM / SINCOR (Venezuela)
2007 EPC New furnace of Hot Oil.
Unit 3500 ICM / SINCOR (Venezuela)
2008 Start up support for automation of Tank farm.
Puerto Miranda PDVSA (Venezuela)
2009 EPC Modifications of Amine Regeneration train
Oriente PDVSA (Venezuela)
2010 Engineering support for automation and replacing furnace body 7.
CEMEX Pertigalete (Venezuela)
2011 Room rack of CEPSA. Gibraltar – San Roque SPAIN.
2012 Drawings for expansion of security system (ESD)
BP Oil in Castellón SPAIN
THE BEST PARTNERSHIP FOR YOUR COMPANY
OIL & GAS CAPACITIES FOR STATICS EQUIPMENT
Design and Supervision in (API) storage tanks assembly
Detailed Engineering and manufacturing:
Heat Exchangers
Coalescers, cartridge, neumatic air, bag and etc. Filters
Pressure Vessels (ASME)
○
○
○
Columns
Reactors
Vertical & Horizontal Pressure Vessels.
Manufacturing is done with our manufacturing company of the group; PROYSER
CALDERERIA, S.A
Specialized software operation:
Heat Exchangers: Aspen HTFS y HTRI.
Pressure Vessel: PV Elite, Compress.
Storage Tanks (API): E-Tank y Tank
Structures: ProStaad SAP 2000.
THE BEST PARTNERSHIP FOR YOUR COMPANY
ELECTRICITY CAPACITIES
Basic and detailed Engineering develop to electricity in Oil & Gas projects.
Design of Power substations, transmission and Distribution BT y AT.
Short circuit studies, relay coodination studies and engine starters.
Design and installation of protection system against atmospheric discharges and
Grounding.
Electricity Software operation: ETAP, DIAlux, SKM Powertools, EDSA.
THE BEST PARTNERSHIP FOR YOUR COMPANY
PRESSURE VESSEL & HEAT EXCHANGER MANUFACTURER
FABRICANTES DE CALDERERIA SEMIPESADA
THE BEST PARTNERSHIP FOR YOUR COMPANY
HISTORY AND GOALS OF PROYSER CALDERERÍA, SA.
Proyser Calderería, SA, is a company established in Madrid (SPAIN) for over 20 years.
Main Goal:
To offer and provide the best SERVICE & QUALITY to our customer, always answering their needs
and meeting the applicable Standards and Codes.
Main areas of activiy:
Oil Refineries
Oil & Gas Industry in general
Chemical Industry
Petrochemical Industry
Cryogenic Industry
Pharmaceutical Industry
Food Industry, etc.
THE BEST PARTNERSHIP FOR YOUR COMPANY
RANGE OF PRODUCT
Heat Exchangers
Pressure Vessels
Distillation Columns
Catalystic Reactors
Pre-manufacturing of Tanks API & Cryogenics
Filters, Reactors, etc.
Skids
MATERIALS
Stainless Steel
High Nickel Content
Ferritics, Austenitics, Refractories
Duplex, Superduplex.
Inconels, Incoloys, Hastelloys, Monels….
Carbon Steel, Low alloy and Alloy Steel.
THE BEST PARTNERSHIP FOR YOUR COMPANY
ACCREDIATIONS & CERTIFICATES
ASME “U” Stamp
ASME “R” Stamp
UNE EN-ISO 9001 / 2008
N.B. (National Board)
PED (Pressure European Directive)
GOST (For Russian, Kazakhstan & Belarus)
TÜV (AD-2000)
THE BEST PARTNERSHIP FOR YOUR COMPANY
PRIMARY INSTRUMENTATION CONTROL DIVISION
THE BEST PARTNERSHIP FOR YOUR COMPANY
LISTADO DE FABRICADOS / LIST FABRICATIONS
INSTRUMENTOS PARA MEDIDA DE CAUDAL / FLOW MEASUREMENT INSTRUMENTS:
PLACAS DE ORIFICIO / ORIFICE PLATES
CONJUNTOS DE BRIDAS Y PLACAS DE ORIFICIO / ORIFICE PLATE AND MEASURING FLANGES
ASSEMBLY
CONJUNTOS DE PLACAS DE ORIFICIO Y CÁMARAS ANULARES / ORIFICE PLATE ASSEMBLY BETWEEN
ANNULAR CHAMBERS
CONJUNTO DE DIAFRAGMA INTEGRAL / INTEGRAL ORIFICE PLATE ASSEMBLY
TUBOS VENTURI / VENTURI TUBES
TOBERAS DE FLUJO / FLOW NOZZLES
ORIFICIOS DE RESTRICCIÓN SIMPLES / SINGLE RESTRICTION ORIFICES
ORIFICIOS DE RESTRICCIÓN MULTIETAPA / MULTISTAGE RESTRICTION ORIFICES
THE BEST PARTNERSHIP FOR YOUR COMPANY
LISTADO DE FABRICADOS / LIST FABRICATIONS
INSTRUMENTOS PARA MEDIDA DE TEMPERATURA
TEMPERATURE MEASUREMENT INSTRUMENTS:
TERMORRESISTENCIAS SIMPLES Y MÚLTIPLES / THERMORESISTENCE SINGLE AND MULTIPLES
TERMOPARES SIMPLES Y MÚLTIPLES / THERMOCOUPLES SINGLE AND MULTIPOINT
VAINAS TERMOMÉTRICAS / THERMOWELLS
CABEZAS DE CONEXIÓN / CONNECTION HEAD
INDICADORES DE NIVEL DE VIDRIO / GLASS LIQUID LEVEL GAGES
REFRIGERANTES PARA TOMA DE MUESTRAS / SAMPLE COOLING COILS.
THE BEST PARTNERSHIP FOR YOUR COMPANY
LISTADO DE FABRICADOS / LIST FABRICATIONS
PANELES DE ANÁLISIS (O2; CONDUCTIVIDAD; PH) /
SAMPLES ANALYSIS SYSTEM (O2; CONDUTIVITY; PH)
ACCESORIOS / ACCESSORIES:
BOTELLAS DE SEPARACIÓN Y CONDENSADO / SEPARATION AND CONDENSATE BOTTLES
BOTELLAS DE DISTRIBUCIÓN DE AIRE / AIR DISTRIBUTION BOTTLES
THE BEST PARTNERSHIP FOR YOUR COMPANY
THE BEST PARTNERSHIP FOR YOUR COMPANY
PRODUCTOS / PRODUCTS
SOPORTES DE TUBERIA / PIPE SUPPORT
CRYOGENIC SUPPORTS
CONSTANT EFFORT SUPPORTS
VARIABLE EFFORT SUPPORT
PIPES CLAMPS AND ANCILLARIES
DYNAMIC RESTRAINTS
STEELWORK
EASY-SLIDE BEARINGS “Easy-Slide”
COMLIN ISOLATION PRODUCTS “Comlin”
CRYOGENIC LOAD-BEARING INSULATION “Isocast”
TURNBUCKLE LOAD CELL / CELULA DE CARGA DE TORNIQUETE
THE BEST PARTNERSHIP FOR YOUR COMPANY
PRODUCTOS / PRODUCTS
RANGE OF PRODUCTS
BOLTING IN GENERAL
GASKETS
ACCENTO (ACUOSTIC & VIBRATIONS)
○
○
MUFFLERS DESIGN & MANUFACTURING
VIBRATION STUDIES
○
EXPANSION BELOWS (Rubber, Metalic & tissue)
ACCESORIES & PIPES
○
○
○
STAINLESS STEEL
SUPERALLOYS (Hastelloy, Duplex, Superduplex, etc)
CS & ALLOYS
FORGING PIECES IN GENERAL (NEUMIRA)
THE BEST PARTNERSHIP FOR YOUR COMPANY
THE BEST PARTNERSHIP FOR YOUR COMPANY
ABOUT CRYOSPAIN
Company registered in 2002 and specialized in Vacuum and Cryogenic
Industry, located in Pinto (Madrid) SPAIN
Business Segment Activities
Design, supply, construction and technical assistance during the start-up
and commissioning of any type of cryogenic installations.
Supply of cryogenic equipment (pumps, vaporizers, filling stations, gas
cylinder valves, vacuum insulated pipes, ...)
Maintenance Service and Repair of cryogenic pumps, storage tanks and
road tankers used for the transport of liquefied air gases, LNG and CO2.
THE BEST PARTNERSHIP FOR YOUR COMPANY
SERVICE SUPPLY CAPACITY
Project and Equipment:
Design, prefabrication and site erection of LOW PRESSURE CRYOGENIC TANKS from nominal capacity 500
m3 up to 6.000 m3.
Supply of CENTRIFUGAL PUMPS, PISTON PUMPS and process CRYOGENIC MACHINERY (compressors,
turbines, heat exchangers, …)
Supply of VAPORIZER UNITS (atmospheric, forced air circulation, hot water, steam and electric power heated)
Supply, erection and commissioning of high pressure GAS FILLING STATIONS.
PUMPING UNITS (Skids) for centrifugal and piston pumps including control panels.
Supply of manual, automatic and pressure relief CRYOGENIC VALVES.
Supply of high pressure GAS CYLINDER VALVES with residual pressure system.
Supply of AUXILIARY EQUIPMENT FOR FILLING STATIONS.
Supply of VACUUM SUPER-INSULATED PIPES and flexible connections.
Services:
MAINTENANCE AND REPAIR of cryogenic pumps and gas compressors.
REVISION, MAINTENANCE, REPAIR AND VACUUM RESTORATION for cryogenic storage tanks and road tankers used
to transport Liquefied Air Gases, LNG and CO2.
We are the exclusive DISTRIBUTOR for Spain & Portugal of CRYOSTAR, the world leader cryogenic pumps
manufacturing company.
THE BEST PARTNERSHIP FOR YOUR COMPANY
REFERENCES
ATMOSPHERIC PRESSURE CRYOGENIC TANKS (LPCT) & GNL TANKS
Including: Design, prefabrication and site erection of low pressure cryogenic tanks, with double walls and insulated by means of Perlite and
Cellular glass.
LIN Tank supplied to Air Liquide India – Qatar, 2014
LIN & LOX 2 Tanks supplied to Linde Dresde – Ukraine, 2013
GNL Tank supplied to SENER / YPFB - Bolivia, 2013
LIN & LOX 2 Tanks supplied to PRAXAIR – Belgum, 2013
LOX & LIN 2 Tanks supplied to Air Liquide – Glogow (Poland), 2013
LIN / LOX Tank supplied to MESSER IBERICA – Tarragona (Spain), 2012
LIN Tank supplied to GULF CRYO – Abu Dhabi (UAE), 2012
LOX Tank supplied to Maxima – Ashdod (Israel), 2010
LIN & LOX 2 Tanks supplied to Messer - Rybnik (Polonia), 2007/2008
LOX & LIN 2 Tanks supplied to Air Liquide - Cabanillas (Guadalajara), 2005
LIN / LOX Tank supplied to PRAXAIR - Pinto / Madrid (SPAIN) – 2003
LIN / LOX Tank supplied to AIR LIQUIDE - Cartagena (Murcia), 2002
And other 8 older references during 2001, 1999, 1997, 1996, 1995, 1994, 1993, 1992 and 1990, but with another company name.
All pre-manufacturer jobs, are done in PROYSER CALDERERIA, SA.
THE BEST PARTNERSHIP FOR YOUR COMPANY
CRYOSPAIN, S.L. is authorized and certified, as follows:
Company authorized for Repairing Pressure Vessels (21/10/09)
Repairing Road Tankers used for transport of Dangerous Materials
(24/11/05)
Erection and installation of Pressure Vessels (21/10/09)
Manufacturer of Pressure Vessels (20/12/06),
in collaboration with our manufacturing company
of the group PROYSER CALDERERIA, S.A.
The Quality Control System of CRYOSPAIN
has been certified by Bureau Veritas as per
ISO 9001:2008
THE BEST PARTNERSHIP FOR YOUR COMPANY
THE BEST PARTNERSHIP FOR YOUR COMPANY
GROUP EXPANSION POLICY
Within the expansion policy of our group in the recent years business division
has been doing survey in different countries and analyzing the possibilities of
each country.
As a result of these analyzes, the CROILGAS Group is expanding its borders
directly and indirectly way.
DIRECTLY WAY:
In 2012 we were established in Moscow, understanding that this area require a big
commitment, as a country with language and documentary barriers.
Croilgas SL. (ООО «КРОЙЛГАЗ»)
○ Suschevskaya, 21, office 610
Сущёвская,21, оф. 610
Moscow 127055 / Москва 127055
Tel.: +7 985.386.60.24
E-mail: [email protected]
THE BEST PARTNERSHIP FOR YOUR COMPANY
GROUP EXPANSION POLICY
INDIRECTLY WAY:
Through our agents we have a commercial network that allows us to get in touch with
our customers and try to participate in the projects where we collaborate with some of
our possibilities.
Agent in Abu Dhabi:
Agent in Kuwait:
Agent in Peru:
THE BEST PARTNERSHIP FOR YOUR COMPANY
Mr. Wael Ashkar
Mr. Samir Hermez
Mr. Hector Romero
THE BEST PARTNERSHIP FOR YOUR COMPANY