ICND110S04L11
Download
Report
Transcript ICND110S04L11
Module Summary
Cisco routers operate at Layer 3, and their function is path
determination.
Binary numbers are based on the “powers of 2.”
IP addressing:
– Dotted decimal representation of a binary string
– Identifies the network, subnet, and host
Routers have a startup process where they test the hardware and
load the operating system and configuration.
© 2007 Cisco Systems, Inc. All rights reserved.
ICND1 v1.0—4-1
Module Summary (Cont.)
Basic router configuration is usually done through the console
port using CLI and consists of the host address and interface IP
addressing.
Routers have hardware, environmental, electrical, and
maintenance-related security threats similar to switches.
Basic router security consists of a login banner and Telnet and
SSH.
© 2007 Cisco Systems, Inc. All rights reserved.
ICND1 v1.0—4-2
Module Summary (Cont.)
The Cisco IOS DHCP server is a full DHCP server that can be
configured using Cisco SDM.
Cisco IOS commands provide a set of tools for remote accessing
and testing, as follows:
– Telnet
– SSH
– ping
– traceroute
© 2007 Cisco Systems, Inc. All rights reserved.
ICND1 v1.0—4-3
© 2007 Cisco Systems, Inc. All rights reserved.
ICND1 v1.0—4-4