Transcript Assembly instructions

Overview
Cable entry system – UNI Flange®
Topics
•
Market
•
Presentation of the cable entry system UNI Flange®
•
Advantages
•
Assembly instructions
•
Applications
•
Solutions by Murrplastik, Elektro Linden, Hauff
25. Februar 2011
Roland Lenzing
2
Market
•
Everywhere
•
Indoor
•
High packaging density
•
Pre-assembled cables with
terminals or connectors
•
High protection: IP 66
•
Tensile resistance: Class A, EN 50 262
25. Februar 2011
Roland Lenzing
3
System characteristics
Two types: UFLD3 and UFLG3 to screw with an
integrated sealing
and
´
25. Februar 2011
Complete splittable cable entry system, two halfs
three pressure nuts
TPE-V Sealing inserts of the UNI Dicht® range for
cable glands with Pg 21 thread on the top
(Art.-No.: UFE 54p…)
Roland Lenzing
4
Technical data
Temperature range: -20 °C up to +80 °C
Protection: IP 66
Tensile resistance: Class A, EN 50 262
Fire protection: HB (UL 94)
Colour: grey, black in preparation
25. Februar 2011
Roland Lenzing
5
Black edition preview
25. Februar 2011
Roland Lenzing
6
Two types
With through holes
Art.-No.: UFLD3 54u
25. Februar 2011
With threaded inserts
Art.-No.: UFLG3 54u
Roland Lenzing
7
Advantages
Completly splittable for the insertion
of pre-assembled cables
Round about 100 different sealing
inserts, for one or more cables up
to flat or special cables
25. Februar 2011
Roland Lenzing
8
Advantages
Tensile resistance: Class A, EN 50 262
25. Februar 2011
Roland Lenzing
9
Advantages
High protection: IP 66
25. Februar 2011
Roland Lenzing
10
Advantages
•
Completely splittable to accept preassembled cables
•
Simple to install and remove
•
Carries torsional forces
•
For cable cross sections of 2,0 mm to 20,5 mm
•
Accepts different cables (approx. 100 different sealing inserts
from the UNI Dicht® range)
•
Also available for flat and special cables
25. Februar 2011
Roland Lenzing
11
Assembly instructions
25. Februar 2011
Roland Lenzing
12
Assembly instructions
25. Februar 2011
Roland Lenzing
13
Expanding pliers
Art.-No.: WSZ 16
25. Februar 2011
Roland Lenzing
14
Assembly instructions
25. Februar 2011
Roland Lenzing
15
Assembly instructions
25. Februar 2011
Roland Lenzing
16
Assembly instructions
25. Februar 2011
Roland Lenzing
17
Assembly instructions
25. Februar 2011
Roland Lenzing
18
Networking / Outdoor
Gustav Hensel GmbH & Co. KG
25. Februar 2011
Roland Lenzing
19
Hot melt products
Baumer HHS GmbH
25. Februar 2011
Roland Lenzing
20
Murrplastik
KDL/E
25. Februar 2011
Roland Lenzing
21
Murrplastik
KDL
25. Februar 2011
Roland Lenzing
22
Murrplastik
KDL/S
25. Februar 2011
Roland Lenzing
23
Murrplastik
25. Februar 2011
Roland Lenzing
24
Murrplastik
KDP/R
25. Februar 2011
Roland Lenzing
25
Murrplastik
KDP/N 24
25. Februar 2011
Roland Lenzing
26
Murrplastik
KDP
25. Februar 2011
Roland Lenzing
27
Elektro Linden
25. Februar 2011
Roland Lenzing
28
Elektro Linden
25. Februar 2011
Roland Lenzing
29
Hauff
25. Februar 2011
Roland Lenzing
30
Thank you for your kind attention!
PFLITSCH GmbH & Co. KG
Ernst-Pflitsch-Straße 1
Nord 1
D-42499 Hückeswagen
Telefon:
+49 2192 911-0
Fax:
+49 2192 911-220
E-Mail:
[email protected]
Internet: www.pflitsch.de