Poster - the Department of Electrical and Systems Engineering

Download Report

Transcript Poster - the Department of Electrical and Systems Engineering

Helicopter Aircraft Wielding Kinect
Department of Electrical and Systems Engineering
Kevin Conley (EE ’12), Paul Gurniak (EE ’12), Matthew Hale (EE ’12), Theodore Zhang (EE ’12) – Team 6, 2012
Advisor: Dr. Rahul Mangharam (ESE)
Motivation: The present state of search and rescue (SAR) requires that the attention of rescue personnel be divided between maintaining their own safety and attempting to rescue any victims that
they find. To help mitigate this risk, we present a quadrotor system capable of mapping an unknown indoor environment for SAR personnel. SAR personnel can use the generated map to plan rescue efforts
while minimizing risks to their personal safety. A quadrotor is ideal for this problem because of its excellent mobility in an unknown enclosed environment when compared to other types of robots. The
current state of the art for 3-D mapping technology uses Light Detection and Ranging (LIDAR) systems, which cost upwards of $2000. This project instead uses the Microsoft Kinect, which is a $150 depth
camera, as a cost-effective replacement, allowing us to provide a more affordable system.
The HAWK System
The HAWK system consists of two main
1. A quadrotor helicopter equipped with
a Microsoft Kinect and an Intel Atom
computer for collecting data
2. A base station laptop computer for
remotely processing and visualizing
the data in real-time
Quadrotor Crash Prevention
RC Receiver
Ping Sensors
Flying a quadrotor takes a significant amount of experience to ensure that flight is both stable
and safe. This is because the pilot must simultaneously adjust four different inputs (roll, pitch,
yaw, and throttle) in real-time. Inexperienced pilots often give disproportionately large inputs
to the system while trying to maintain the desired orientation, causing large, dangerous
motions. To help prevent crashes in such situations, we have implemented a filter shown in
the flow chart below that censors potentially harmful input commands.
RC Receiver
RC Controller
2.4 GHz RC
Do the ping
sensors detect an
obstacle too close
in the commanded
Will the next
command cause
the quadrotor
to move
Laptop Computer
Quadrotor is
commanded to hover
and not move in the
commanded direction
Adjust the next
command to make
subsequent motion
less violent.
Figure 1: Ping sensors configured to fire sequentially
Command is passed
to the quadrotor
Intel Atom
Wi-Fi Router
Base Station
Quadrotor Helicopter
The ping sensors mounted on the quadrotor locate nearby obstacles by measuring the time
that elapses between emitting a sound pulse and receiving its reflection. These sensors
measure distances of 6 to 254 inches and are accurate to within 1 inch. The ping sensors are
chained to fire sequentially so that one sensor does not erroneously receive the reflection of
sound emitted by another. A chaining diagram is shown in Figure 1, and five chained ping
sensors as mounted on the quadrotor are shown in Figure 2.
Figure 2: Full HAWK system with ping sensors outlined in red
Creating a 3D Map using the Kinect
Color (RGB) Image
The Microsoft Kinect on the quadrotor uses
stereo cameras and an infrared (IR) projector
to provide live color video and depth image
feeds to an onboard Intel Atom processor.
These images are compressed and transmitted
via Wi-Fi (802.11n) back to the base station in
The base station overlays the color and
depth images from the Kinect to produce
a point cloud. This is a collection of (x,y,z)
coordinates and associated color values
that provide a three-dimensional
visualization of the quadrotor’s viewpoint.
Point Cloud (from left)
Features, which are landmarks like edges or
areas of high contrast, are extracted from
each color image. This task is accelerated by
use of an implementation of GPU SURF
(Speeded Up Robust Features) that uses
NVIDIA’s CUDA to parallelize the procedure.
SURF Features
Features across different images are stored and
matched in logarithmic time using a k-d tree.
The three-dimensional location of each match
is determined using the point cloud. Matches
are compared to determine how the quadrotor
has moved between successive images.
RANSAC Matches
We have successfully demonstrated the efficacy of using a quadrotor helicopter to wirelessly transmit
camera data from a Kinect to a remote base station for 3D image processing.
The two images below show the output visualization produced by the base station software. Point
clouds from separate viewpoints are combined using the motion estimate produced by SLAM, and the
resulting map is then rendered using OpenGL. All results are developed and displayed in real time.
Visualization Results Produced while Mapping the Second Floor of Moore Building
Quadrotor with Kinect
Intel Atom
Depth Image
(Note: depth was colorized using the provided legend)
Laptop PC
(Base Station)
The color camera feed is provided to the
operator of the base station, which is used to
remotely pilot the quadrotor. The onboard
flight controls help assist with remote
The throughput achieved is above 6 frames
per second within at least 60 meters line-ofsight (the length of Towne Hall first floor
hallway). This is sufficient for a human
operator to remotely pilot the system.
Point Cloud (from right)
The red circles in the image above are the
locations of extracted SURF features. GPU
SURF is capable of extracting 500 to 700
features per image without placing a heavy
load on CPU resources.
CPU implementations of SURF (OpenCV) are
limited to around 3 frames per second while
extracting a comparable number of features,
which would limit the system throughput.
Making an accurate motion estimate requires
the elimination of erroneous matches using
RANSAC (RANdom SAmple Consensus).
Matches are classified into those that fit the
movement model (inliers, shown in green), and
those that do not (outliers, shown in red).
Using this movement estimate, point clouds
from different views are combined to build a
larger three-dimensional map.
Figure 3: High-Detail, Zoomed In
Figure 4: Low-Detail, Zoomed Out
Based on the 3D maps we have created using HAWK, we have concluded that the system is effective at
producing accurate, detailed maps in certain small environments such as cluttered rooms and tight
However, the environments in which the Kinect is successful do not sufficiently cover the areas of
interest to search and rescue (SAR) personnel. Our conclusion is that the Kinect has considerable
limitations in terms of resolution and range, both of which make mapping hallways or large rooms
The authors would like to acknowledge the contributions of Kirk MacTavish, Sean Anderson, William Etter, Dr. Norm Badler, Karl Li, Dan Knowlton, and the other members of the SIG Lab.