Transcript HYUNDAI WIA Front Loading Turning Center

LF2100/2600
HYUNDAI WIA Front Loading Turning Center
Technical Leader
LF2100/2600 Front Loading Turning Centers were
developed by Hyundai WIA CORP to boast high
performance and high stiffness with years of expertise
and latest technology. Efficiency and maximum
productivity is the philosophy behind these products.
LF2100 Series
Swing Over the Bed mm(in)
Ø650 (25.6″)
Max. Turning Length mm(in)
170 (6.7″)
Chuck Size
inch
Bar Capacity
mm(in)
Speed (rpm)
r/min
Motor (Max/Cont.) kW(HP)
Travel(X/Z)
mm(in)
No. of Tool
EA
8″
Ø65 (2.6″)
4,000
15/11 (20/15)
190/170 (7.5″/6.7″)
2×10
LF2600 Series
Swing Over the Bed mm(in)
Ø650 (25.6″)
Max. Turning Length mm(in)
170 (6.7″)
Chuck Size
inch
Bar Capacity
mm(in)
Speed (rpm)
r/min
Motor (Max/Cont.) kW(HP)
Travel(X/Z)
mm(in)
No. of Tool
EA
10″
Ø76 (3″)
3,000
22/18.5 (30/25)
190/170 (7.5″/6.7″)
2×10
Twin Spindle Front Loading
CNC Turning Center
LF2100/2600
● Highly stiff servo turret
● Symmetrical headstock to prevent thermal deformation
● Ball screws that hold X & Z axes on both ends
● High-speed gantry loader for cycle time reduction
● Minimal vibration through separable bed
HYUNDAI WIA
MACHINE TOOL
Front Loading Turning Center
LF2100/2600 SERIES
04
+
05
Twin Spindle Front Loading
Turning Center
LF2100/2600 Series also features high mobility through their compact size, making it
suitable for tight spaces, as well as automated operation for maximizing productivity.
01
LF2100/2600
Basic Features
Optimized Layout and Design, Twin Spindle
Front Loading CNC Turning Center
01
Separated Bed Design
Separated bed design minimizes heat distortion and vibration to maintain stable
cuttingcapacity. By collection disposed lubricant oil, it fosters pleasant work environment.
02
Main Spindle
03
The headstock is designed to maintain a high rate of accuracy even
during long consecutive operations due to the insulating panel and
the base of an all-in-one structure in bilateral symmetry which
block heat.
Direct Connet X/Z Axis Feed Structure
Improved location accuracy by applying X/Z axis direct positioning
motor structure that minimizes heat transference from motor to bed.
Z Axis Slideway
Designed to raise x-axis saddle on the z-axis slide surface on
the upper ber to minimize sag when turret moves to the z-axis
direction.
Increased Guideway Span
Increased guideway span allows for safely adjustable axes,
making it easy to optimize feeds.
Existing Machine
LF2100/2600
280 mm (11″)
320 mm (12.6″) 14% UP
Turret
Highly stiff BMT turret with 5.5kW motor power
output makes it the most powerful of its kind in
the market, and the results are
incredible for short,
high-speed cutting processes.
04
Front Loading Turning Center
HYUNDAI WIA
MACHINE TOOL
Basic Features
LF2100/2600 SERIES
03
04
01
02
06
+
07
LF2100/2600
10” Horizontal Lathe
Existing Machine
X/Z Axis Guide Size
Expanded X/Z axis guide size to increase feed stability.
30% expanded guide size than
existing machines
Powerful Cutting Capability & Large Working Area
◉Spindle Output (Max.) : LF2100 Series : 15 kW (20.1 HP)
LF2600 Series : 22 kW (29.5 HP)
◉Spindle Torque (Max.) : LF2100 Series : 286.5 N.m (211.3 lbf.ft)
LF2600 Series : 493 N.m (363.6 lbf.ft)
◉ Travel (X/Z axis) : 190/170 mm (7.5″/6.7″)
02
LF2100/2600
High-Precision Spindle
Long Lasting High Accuracy & Excellent Performance
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
Spindle
Main Spindle
0.001°
Front Loading Turning Center
Highest torque in its class, once again makes it the best suitable
for high-speed cutting processes. The main spindle also
features the largest in its class, P4 angular contact bearing in
the headstock [Ø110 (Ø4.3″)], reducing heat without sacrificing
performance.
LF2100/2600 SERIES
LF2100 Series : 286.5 N.m (211.3 lbf.ft)
LF2600 Series : 493 N.m (363.6 lbf.ft)
C-Axis Control
The "M" type features C-axis 0.001˚ controls, enabling
processes that require various shapes and dimensions.
Spindle Output/Torque Diagram
LF2100/LF2100M
Torque(N.m [lbf.ft])
Power(kW [HP])
493N.m [363.6lbf.ft]
286.5N.m [211.3lbf.ft]
15
[20.1]
LF2600/LF2600M
Torque(N.m [lbf.ft])
Power(kW [HP])
15kW [20.1HP] (30min)
211.3
22
[29.5]
22kW [29.5HP]
493
[363.6]
16.5
[22.1]
26.4
4,000
426
2,556
Spindle Speed (r/min)
3,000
Spindle Processing Flow
Parts requiring secondary operations are
transferred from Z1 spindle to Z2 spindle via
the Z1 spindle’s axis, allowing the secondary
process to begin.
The same part can be machined simultaneously, utilizing both the spindle of Z1 axis and Z2
axis, doubling productivity in a single machine.
{29.5]
47N m
14N.m
16.5
[22.1]
500
Spindle Speed (r/min)
Power(kW
08
+
22 09
.
Multiple families of parts can also be
machined simultaneously, utilizing both the
spindle of Z1 axis and Z2 axis, doubling
productivity in a single machine.
03
LF2100/2600
Turret
Servo Turret
High speed, High Accuracy, Highly Reliable
Servo Turret
LF2100/2600 Series has high performance AC servo motor attached, enhances its process reliability.
Especially 3-piece coupling is attached, which makes split accuracy better. Powerful tool clamping
using hydraulic minimizes tool tip deviation due to load, which displays excellent performance during
heavy duty cutting.
◉ Number of Tool : 2×10 EA
◉ Tool Size (O.D/I.D)
□25/Ø40 (□1″/Ø1
◉ Indexing Time :
1/2″)
0.2 sec/step
Machining Capability
The 100mm(3.9″) diameter disc of the holder and the increased
M12 bolts (from M10 bolts from previous models) reinforces
clamping force on the turret.
Mill Tool Holder
Cutting (O.D)
Machining capabilities have been increased with the addition of
a Straight Milling Head, which can remove material from the side
of the workpiece, and an Angular Milling Head, which can
perform I.D. operations.
A wide variety of additional tool holders can further enhance
the machines with capabilities that include drilling and tapping,
among others.
Straight Milling Head
Angular Milling Head
〈Material〈JIS〉:S45C(Carbon steel〉
Processing diameter
Side cutting depth
Cutting speed
Spindle Speed
Forwarding speed
Chip discharge
Ø86 (Ø3.4″)
6 mm (0.2″)
150 m/min
(5,905.5 ipm)
646 rpm
0.5 mm/rev
(0.019″/rev)
450 in3/min
10
+
11
❖ The above result might be different by types of
processing circumstance
2100M
LF2600/LF2600M
Torque(N.m [lbf.ft])
493N.m [363.6lbf.ft]
20.1HP] (30min)
211.3
22kW [29.5HP]
22
[29.5]
Mill Spindle
Torque(N.m [lbf.ft])
Power(kW [HP])
Torque(N.m [lbf.ft])
Power(kW [HP])
493
[363.6]
22
{29.5]
5.5kW [7.4HP] (30min)
47N.m [34.6lbf.ft]
14N.m [10.3lbf.ft]
1.1kW [1.5HP] (Cont.)
16.5
[22.1]
16.5
[22.1]
47
[34.6]
14
[10.3]
26.4
(r/min)
4,000
426
2,556
Spindle Speed (r/min)
3,000
750 1,115
2,500
Spindle Speed (r/min)
4,000 5,000
◉ Output (Max.) : 5.5 kW (7.4 HP)
◉ Speed (rpm) : 5,000 r/min
◉ T
urret Indexing Time :
0.2 sec/step (Best-in-class)
◉ Collet size :
Ø16 (Ø5/8″) (ER25)
◉ Live Tool Type :
BMT55P
Front Loading Turning Center
LF2100M/2SP
LF2100/2600 SERIES
Mill Turret (BMT)
HYUNDAI WIA
MACHINE TOOL
Turret
04
LF2100/2600
Smart System
Software for smart operating
and machining
HW-TM
HYUNDAI WIA Smart System
Monitor
chine
ing
Ma
Eas
y
Us
HW-ESS
User Friendly
for CNC Turning Center
gy Saving
Ener
HW-MMS
ent Machini
ellig
ng
Int
er
Convenien
ce
HW-eDNC
HW-MCG
g
Programmin
HWDPRO T/TM
HW-PGi F (HYUNDAI WIA Programming Guide i for Fanuc System)
(Standard)
Realistic 3D solid animation
Example of easy programming
Engraving Cycle
Programming simulation
Easy programming interactively
without code
Programming with only entering text by
controlling C-axis
Gantry Loader Manager)
Set the position coordinates and the loader driver support features such as easy and
convenient way to provide the user operating the loader to be used to support the software
HW-eDNC
HW-MCG
HYUNDAI WIA ethernet
Direct Numerical Control
HYUNDAI WIA
Machine Guidance
This software transmits and receives the CNC of processing equipment,
the processing program and the NC data on a PC through the internet
or serial communications, while managing the processing program of
the CNC memory.
NC loading type software offering user-convenience functions
like operating equipment, maintenance and monitoring of
managing equipment
HW-TM
HW-ESS
HYUNDAI WIA
Tool Monitoring
HYUNDAI WIA
Energy Saving System
This is an equipment-monitoring software which checks the overload,
attrition and possible damage of equipment by analyzing the spindles
and the output load of the feed shaft generated during a processing
operation.
This is an environment-friendly power reduction software reducing
the standby power unnecessarily wasted in the equipment waiting for
a processing operation.
HW-DPRO T/TM
HW-MMS
HYUNDAI WIA Dialogue
PROgram Turn/TurnMill
HYUNDAI WIA
Machine Monitoring System
Using a dialogue method, this software makes it easy to work out a
program for a lathe processing operation with complicated
configurations. (Can be installed on a PC.)
This software is for remote control monitoring of equipment status
(mobile, PC.)
It checks and manages the state of multiple pieces of equipment and
the progress of processing on a real time basis.
LF2100/2600 SERIES
HW-GLM (HYUNDAI WIA
Front Loading Turning Center
Faster processing programming and enhanced processing accuracy are possible
through HYUNDAI WIA Smart System. It also maximizes productivity through equipment
monitoring and environment-friendly software.
HYUNDAI WIA
MACHINE TOOL
HYUNDAI WIA Smart System
12
+
13
05
Automation System
Various Devices for User Friendly
LF2100/2600
Gantry Loader System
◉ Gantry Loader Work Weight : 6 kg (13.2 lb)
◉G
antry Loader Work Size :
ø180x120 mm (ø7.1″x4.7″)
◉G
antry Speed (X/Y/Z) :
150/120/60 m/min (5,901/4,724/2,362 ipm)
◉ Stocker Max. Loader Height : 450 mm (17.7″)
◉ Stocker Max. Loader Weight : 100 kg (220.4 lb)
Gantry Loader Machining Process
Construction of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work
stocker. Optimization of the installation space is also possible. In particular, excellent machining effect is achieved during
continuous machining of both sides of the same or different work
Raw Material
In Work Stocker
1st Machining
Turn Over
Finishing
Out Work Stocker
2nd Machining
Specifications
Standard & Optional
LF2600
○
●
●
●
○
○
☆
●
☆
M●
●
M ●
M ●
M ●
M ○
M ○
●
●
○
○
☆
M ☆
●
M●
M●
M●
M○
M○
●
●
○
○
☆
M☆
☆
☆
☆
☆
☆
☆
☆
☆
☆
☆
●
●
○
●
●
○
☆
☆
M ○
○
☆
☆
○
M○
○
☆
☆
○
☆
●
☆
○
☆
☆
●
●
○
☆
○
☆
●
☆
○
☆
☆
●
●
○
☆
○
○
○
○
○
○
○
☆
●
●
☆
●
●
☆
☆
The specifications as above will only serve as a reference.
●
●
☆
●
●
☆
Electric Device
Call Light
Call Light
Call Light & Buzzer
Electric Cabinet Light
Remote MPG
Spindle Load Meter
Spindle Speed Meter
Work Counter
Total Counter
Tool Counter
Multi Tool Counter
1 Color : ■
3 Color : ■■■
3 Color : ■■■B
LED Type
LED Type
Digital
Digital
Digital
6ea
9ea
Electric Circuit Breaker
ABS Encoder
AVR (Auto Voltage Regulator)
Transformer
Auto Power Off
Double Foot Switch
Measurement
Q-Setter
Automatic Q-Setter
Work Close
Confirmation Device
Work Setter
30kVA
35kVA
Removable Type
TACO
SMC
X Axis
Z Axis
Coolant Level Sensor (Only for Chip Conveyor)
Measuring System
For Automation
Environment
Air Conditioner
Dehumidifier
Oil Mist Collector
Oil Skimmer (Only for Chip Conveyor)
MQL (Minimal Quantity Lubrication)
Fixture & Automation
Linear Scale
Standard
High Speed
Auto Shutter (Only for Automatic System)
Sub Operation Pannel
Bar Feeder Interface
Bar Feeder (FEDEK)
Extra M-Code 4ea
Automation Interface
Auto Door
16Contact
32Contact
Turret Work Pusher (For Automation)
GANTRY Automation System
Turn Over Device
In Stocker (Rotary)
8/10/12/14 Pos
OUT Stocker (Rotary)
8/10/12/14 Pos
NG Chute
Hyd. Device
Standard Hyd. Cylinder
Solid
I/O Extension (IN & OUT)
Standard Hyd. Unit
35 bar (508 psi)/
15ℓ(4 gal)
S/W
Machine Guidance (HW-MCG : FANUC)
Tool Monitoring (HW-TM : FANUC)
DNC Software (HW-eDNC : FANUC)
Interactive Program
Energy Saving System (HW-ESS : FANUC)
Machine Monitoring System (HW-MMS : FANUC)
Load Master (HW-GLM : FANUC)
ETC
Tool Box
Customized Color
Need Munsel No.
CAD & CAM
LF2100
●
○
○
○
○
●
●
●
○
○
○
○
○
●
☆
○
-
○
☆
●
-
☆
☆
☆
○
○
☆
☆
○
○
○
○
☆
○
☆
●
☆
-
-
○
☆
○
○
☆
☆
☆
☆
☆
☆
●
LF2600
●
○
○
○
○
●
●
●
○
○
○
○
○
●
☆
○
○
☆
●
☆
☆
☆
○
○
☆
☆
○
○
○
○
☆
○
☆
●
☆
○
☆
○
○
☆
☆
☆
☆
☆
☆
●
●
●
☆
○
○
○
○
☆
☆
☆
○
○
○
○
☆
☆
●
☆
☆
●
☆
☆
HYUNDAI WIA
MACHINE TOOL
LF2100
○
☆
●
☆
●
●
○
○
☆
●
☆
M ●
Front Loading Turning Center
Main Spindle
8″
Hollow Chuck 3 Jaw
10″
Main Spindle
8″
Solid Chuck 3 Jaw
10″
Standard Soft Jaw (1set)
Chuck Clamp Foot Switch
2 Steps Hyd, Pressure Device
2 Steps Foot Switch
Spindle Inside Stopper
Chuck Open/Close Confirmation Device
Main Spindle 5° Index
C-Axis (0.001°)
Turret
Turret
Mill Turret
Radial
Straight Mill Holder (Radial) Collet Type,2ea
Angular Mill Holder (Axial)
Collet Type,2ea
Straight Mill Holder (Radial) Adapter Type
Angular Mill Holder (Axial)
Adapter Type
Boring Sleeve
Drill Socket
U-Drill Holder
U-Drill Holder Sleeve
O.D Extension Holder
For Out-Dia
Swivel Head
Tail Stock & Steady Rest
Quill Type Tail Stock
Tail Stock Foot Switch
Standard Live Center
High Precesion Live Center
2 Steps Tail Stock Pressure System
Coolant & Air Blow
Standard Coolant (Nozzle)
Chuck Coolant (Upper Chuck)
Gun Coolant
Spindle Thru Coolant
(Only Hollow Cylinder & Special Chuck)
Thru Coolant for Live Tool
Chuck Air Blow (Upper Chuck)
Tail Stock Air Blow (Upper Tail Stock)
Turret Air Blow
Air Gun
Spindle Thru Air Blow
(Only Hollow Cylinder & Special Chuck)
6 bar (87 psi)
High Pressure Coolant
20 bar (290 psi)
70 bar (1,015 psi)
Power Coolant System (For Automation)
Coolant Chiller
Chip Disposal
Coolant Tank
220ℓ(58.1 gal)
Hinge
Chip Conveyor
Scraper
Special Chip Conveyor (Drum Filter)
Standard
(180ℓ[47.5 gal])
Swing
(200ℓ[52.8 gal])
Chip Wagon
Swing Large Size
(290ℓ[76.6 gal])
Large Size
(330ℓ[87.2 gal])
Customized
Safety Device
Door Inter-Lock
Total Splash Guard
Quill Forward/Reverse Confirmation Device
Chuck Pressure Failure Detector
Back Spin Torque Limiter (BST)
Torque Limiter
● : Standard ○ : Option ☆ : Prior Consultation - Non Application
LF2100/2600 SERIES
Spindle
14
+
15
6
1894(74.5)
Specifications
External Dimensions
unit : mm(in)
1530(60.2)
4570(180)
4240(167)
3500st(137.7)
440(17.3)
1530(60.2)
6.5(0.2)
700st
(27.5)
1268(49.9)
824.5(32.4)
629.5 195
(24.7) (7.6)
1517(59.7)
2357(92.8)
3096(121.8)
115
F.L+1150(45.2)
675st
2051(80.7) (26.5) (4.5)
840(33)
1146(45.1)
10(0.4)
F.L+1150(45.2)
880(34.6)
1173(46.2)
2480(97.6)
1894(74.5)
Specifications
Tooling System
HYUNDAI WIA
MACHINE TOOL
unit : mm(in)
O.D Holder
O.D Holder
Straight Mill
Holder
Facing Holder
Facing Holder
I.D Holder
Angular Mill
Holder
BMT 55P
10 Station
10 Station
I.D Holder
Front Loading Turning Center
LF2100M/LF2600M
LF2100/2600 SERIES
LF2100/2600
16
+
17
Tooling Parts Detail
ITEM
Turning Holder
Boring Holder
Driven Holder
O.D Holder
Right/Left
Facing Holder
LF2100/2600
LF2100M/2600M
8
6
2
2
Single
10
8
Straight Mill Holder
Standard
-
2
Angular Mill Holder
Standard
-
2
Ø8 (5/16″)
2
2
Ø10 (3/8″)
2
2
Ø12 (1/2″)
2
2
Ø16 (5/8″)
2
2
Ø20 (3/4″)
2
2
Ø25 (1″)
2
2
Ø32 (1 1/4″)
2
2
MT 1 × MT 2
2
2
MT 2
2
2
-
2 Set
I.D Holder
Boring
Socket
Drill
ER Collet
Specifications are subject to change for improvement without notice.
Specifications
Interference
unit : mm(in)
LF2100M/2SP
465(18.3)
(25
50
Ø
21
Ø
0(
21
Ø6
Ø6
50
(25
.6)
440(17.3)
.6)
465(18.3)
8.
2)
0(
8.
2)
7(0.2)
165(6.5)
180(7)
10(0.4)
10(0.4)
113 165(6.5) 165(6.5)
(4.4)
190(7.4)
120
330(13)
(X1-STROKE) (4.7)
120
190(7.4)
(4.7) (X1-STROKE)
330(13)
440(17.3)
465(18.3)
CU
T
TT
U
)
.2
8
0(
Ø
2)
(1
4.
1)
(M
Ø6
21
Ø
8.
36
0
0(
Ø
24
0(
21
35(1.3)
165(6.5)
165(6.5)
330(13)
180(7)
10(0.4)
190(7.4)
120
(4.7) (X1-STROKE)
10(0.4)
180(7)
85 165(6.5) 165(6.5)
(3.3)
190(7.4)
120
(X1-STROKE) (4.7)
330(13)
)
.6
25
(
50
AX
C
M
AX
)(
Ø
9.
4
Ø6
)
.6
25
(
50
TI
IN
G
NG
D
DI
IA
A.
.)
465(18.3)
180(7)
)
165(6.5)
Specifications
Interference
HYUNDAI WIA
MACHINE TOOL
unit : mm(in)
LF2600M/2SP
465(18.3)
Front Loading Turning Center
440(17.3)
LF2100/2600 SERIES
Ø
25
165(6.5) 165(6.5)
Ø
4(
180(7)
25
10
)
10(0.4)
4(
10
)
7(0.2)
180(7)
113
(4.4)
10(0.4)
120
190(7.4)
(4.7) (X1-STROKE)
330(13)
Ø6
Ø6
50
50
(25
(25
.6)
.6)
465(18.3)
165(6.5) 165(6.5)
190(7.4) 120
(X1-STROKE)(4.7)
440(17.3)
18
+
19
465(18.3)
DI
A
G
)
Ø6
Ø2
54
(1
0)
Ø
36
0(
10
)(M
AX
24
Ø
4(
14
.1
25
CU
TT
C
(M
AX
Ø
165(6.5) 165(6.5)
330(13)
180(7)
10(0.4)
190(7.4)
120
(4.7) (X1-STROKE)
10(0.4)
35(1.3)
180(7)
85 165(6.5) 165(6.5)
(3.3)
190(7.4)
120
(X1-STROKE) (4.7)
330(13)
.6
25
(
50
IN
U
G
TT
IN
)
0
Ø6
.6
25
(
50
.)
D
IA
.)
465(18.3)
330(13)
)
Specifications
Tooling Travel Range
unit : mm(in)
20
(0.8)
132(5.2)
Ø40(1.6)
190(7.5)
(STROKE)
165(6.5)
23(0.9)
18(0.7)
60
(2.3)
10(0.4)
40(1.6)
190(7.5)
(STROKE)
120(4.7)
165(6.5)
Ø210(8.3)
10(0.4)
180(7)
120(4.7)
170(6.7)
(STROKE)
34(1.3)
Ø210(8.3)
114(4.5)
190(7.5)
(STROKE)
144(5.6)
127(5)
170(6.7)
(STROKE)
87(3.4)
165(6.5)
120(4.7)
Ø210(8.3)
4(0.1)
75
(2.9)
44
(1.7)
154(6)
Ø210(8.3)
114(4.5)
190(7.5)
(STROKE)
170(6.7)
(STROKE)
120(4.7)
170(6.7)
(STROKE)
165(6.5)
40
(1.6)
150(5.9)
22(0.8)
7(0.3)
114(4.5)
10(0.4)
Ø210(8.3)
170(6.7)
(STROKE)
180(7)
170(6.7)
(STROKE)
152(6)
Ø210(8.3)
100(3.9) 4
35
(1.4)
280(11)
LF2100 Series
165(6.5)
7(0.2)
120(4.7)
190(7.5)
(STROKE)
190(7.5)
(STROKE)
120(4.7)
165(6.5)
Specifications
Tooling Travel Range
unit : mm(in)
165(6.5)
Ø254(10)
20
+
21
23.1
(0.9)
18.1(0.7)
60
(2.3)
10(0.4)
4(0.1)
170(6.7)
(STROKE)
154(6)
12(0.5)
44
(1.7)
75(2.9)
120(4.7)
40(1.6)
190(7.5)
(STROKE)
190(7.5)
(STROKE)
144(5.6)
120(4.7)
165(6.5)
Ø254(10)
10(0.4)
180(7)
120(4.7)
34(1.3)
148(5.8)
Ø254(10)
114(4.5)
127.4(5)
170(6.7)
(STROKE)
87.4(3.4)
165(6.5)
120(4.7)
7(0.2)
190(7.5)
(STROKE)
Front Loading Turning Center
40(1.6)
190(7.5)
(STROKE)
114(4.5)
190(7.5)
(STROKE)
LF2100/2600 SERIES
7(0.3)
34(1.3)
136(5.3)
132(5.2)
170(6.7)
(STROKE)
22(0.8)
114(4.5)
Ø254(10)
Ø40(1.6)
Ø254(10)
165(6.5)
9(0.3)
10(0.4)
170(6.7)
(STROKE)
120(4.7)
180(7)
170(6.7)
(STROKE)
165(6.5)
100(3.9) 4
35
(1.4)
280(11)
Ø254(10)
170(6.7)
(STROKE)
HYUNDAI WIA
MACHINE TOOL
LF2600 Series
190(7.5)
(STROKE)
120(4.7)
165(6.5)
Specifications
Specifications
[
LF2100/2SP
ITEM
CAPACITY
Max. Turning Dia.
mm(in)
Max. Turning Length
mm(in)
155 (6.1″)
170 (6.7″)
Bar Capacity
mm(in)
Ø65 (2.6″)
Ø76 (3″)
Inch
8″
mm(in)
Ø78 (3.1″)
r/min
4,000
Spindle Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Cont.)
286.5 (211.3)
-
BELT
-
A2-8
deg
ID
Touque (Max/Cont.)
NC
□25 (1″ )
mm(in)
Ø40 (1 1/2″)
0.2
kW(HP)
-
5.5/1.1 (7.4/1.5)
-
5.5/1.1 (7.4/1.5)
r/min
-
5,000
-
5,000
47 (34.7)
-
47 (34.7)
-
mm(in)
- Ø16(5/8″) (ER25)
- Ø16(5/8″) (ER25)
-
-
-
Type
Machine
2×10
mm(in)
N.m(lbf.ft)
Collet Size
BMT55P
Coolant Tank
ℓ(gal)
220 (58)
Lubricating Tank
ℓ(gal)
1.8 (0.5)
Electric Power Supply
Thickness of Power Cable
0.001˚
BOX GUIDE
sec/step
Milling Tool Speed (rpm)
-
24/24 (945/945)
EA
OD
0.001˚
493 (363.6)
190/170 (7.5″/6.7″)
-
Motor (Max/Cont.)
power
Suply
-
m/min(ipm)
Indexing Time
tank
Capacity
mm(in)
No. of Tool
Tool Size
3,000
15/11 (20/15) 22/18.5 (29.5/24.8)
Spindle Nose
Ø95 (3.7″)
Spindle Type
Rapid Travel (X/Z/B)
10″
Slide Type
live tool
ø360 (ø14.2″)
kW(HP)
Travel (X/Z/B)
turret
Ø650 (25.6″)
N.m(lbf.ft)
C-axis Indexing
] : Option
LF2600M/2SP
mm(in)
Spindle Bore
Feed
LF2600/2SP
Swing Over the Bed
Chuck Size
Spindle
LF2100M/2SP
17
kVA
Over 16 (5)
Sq (AWG)
Voltage
220/60 (200/50)
V/Hz
Floor Space (L×W)
mm(in)
2,480 x 2,084 (97.6″ x 82″)
Height
mm(in)
2,360 (92.9″)
Weight
kg(lb)
Controller
Specifications are subject to change for improvement without notice.
-
7,000 (15,432)
FANUC 31i-A
7,300 (16,093)
BMT55P
Controller
Simultaneous controllable axes
Least input increment
Least command increment
High speed HRV control
Inch / Metric conversion
Interlock
Machine lock
Emergency stop
Stored stroke check 1
Stored stroke check 2
Stored stroke check 3
Follow-up
Servo-off
Backlash compensation
Position switch
Unexpected disturbance torque detection
High resolution transfer control (HRM)
LCD / MDI
Operation
Automatic operation (memory)
MDI operation
Search function
Program restart
Wrong operation prevention
Buffer register
Program check function
Single block
Feed functions
Manual jog feed
Manual handle feedrate
Feed command
Feedrate override
Jog override
Rapid traverse override
Override cancel
Feed per minute / rotation
Program input & interpolation functions
Nano interpolation
Dwell
Thread retract
Variable lead threading
1st reference point return
Reference point return check
2nd reference point return
Program stop / End
Tape code
Optional block skip
Maximum programmable dimensions
Program number
Absolute and incremental programming
Decimal point input
Plane selection
Work coordinate system selection
Manual absolute
Direct drawing dimension programming
G code system
Programmable data input
Sub program call
Custom macro B
Addition of custom macro common variable
Multiple repetitive cycles
Multiple repetitive cycles Ⅱ
Canned cycles for turning
G20 / G21
Each axis / All axis
All axis
Over-travel
+/- 0~9999 pulses(Rapid traverse & cutting feed)
Back-spin torque limiter (BST)
10.4″ Color LCD
Sequence, program
Dry run., program check
Rapid, jog, handle
x1, x10, x100
F code feedrate direct command
0~200 % (10% units)
0~2,000 mm/min[79 ipm]
F1, F5, F25/F50, F100%
Positioning/Linear/Circular (G00/G01/G02, G03)
G04, 0~9999.9999 sec
G28, manual
G27
G30
M00, M01 / M02, M30
EIA / ISO
1 ea
+/- 9999.9999″
O+4 digits
G17, G18, G19
G52 to G59
“ON” fixed
Included chamfering / Corner R`
A
G10
10 Step
#100 to #199, #500 to #999
Figures in inch are converted from metric values.
Design and specifications subject to change without notice.
Sub / Main spindle function
M-Code function
M-Code function lock
Lock sp. speed command
Main sp. constant control
Spindle speed override
Spindle position decision
Rigid tapping
Tool function / Tool compensation
Tool function
Tool offset pairs
Tool offset
Tool nose radius compensation
Direct input of measured tool
compensation value B
Tool life management
Data in/output & editing functions
Input/Output interface
Memory card input/output
Embeded ethenet
Part program storage length
Number of registrable programs expansion
Memory lock
Background editing
Extended part program edition
Display, diagnosis & setting functions
Self-diagnosis function
History display
Help function
External message
Run hour / Parts count display
Display of actual spindle speed and T code
Actual cutting feedrate display
Operating monitor screen
Graphic display
Spindle / Servo setting screen
Selection of 5 optional language
LCD screen save
Automatic data backup
Functions according to machine specification
Cs contouring control
Stored pitch error compensation
Polar coordinate interpolation
Cylindrical interpolation
Canned cycles for drilling
Spindle orientation expansion
Option
High speed ethernet
Optional block skip
3rd & 4th reference point return
G code system
Part program storage length
Tool Offest
Poligon Turning
Helical interpolation
Dynamic graphic display
Protection of data at 8 levels
Manual guide i
Tool Monitoring function
M4 digits
S4 digits, binary output
G96, G97
50% to 150% (10% units)
T2 + 2
64 pairs
Front Loading Turning Center
Controlled axes
Max. 6 axes are available
X, Z axis
X, Z, C axis
X, Z, B, C, A axis
X, Z, Y, B, C, A axis
2axeis / Linear and circular (Max. 4axes)
X, Z, Y, B axis : 0.001 mm (0.0001”)
C axis : 0.001 deg
X, Z, Y, B axis : 0.001 mm (0.0001”)
C axis : 0.001 deg
G40, G41, G42
RS232C
100 Mbps
512 Kbyte
Max 1,000 Programs
Copy, move, change of NC program
LF2100/2600 SERIES
Axis control / Display unit
HYUNDAI WIA
MACHINE TOOL
FANUC 31i-A
Alarm & operation display
Rod meter light
Screen saver
Turn
Turn
Turn
Turn
Turn
Turn
mill
mill
mill
mill
mill
mill
100 Mbps (Option board is required)
9 ea
B/C
512 Kbyte / 1024 Kbyte
99 / 200 / 400 EA
Interactive program
HWTM (Built-in Fanuc type)
22
+
23
2)),&(6
Global
Network
+<1'$,:,$&RUS
+<1'$,:,$0DFKLQH
$PHULFD&RUS&KLFDJR
+<1'$,:,$
$PHULFD7HFKQLFDO&HQWHU
$0(5,&$&253
/$2IILFH
+<81'$,:,$(XURSH
5DXQKHLP6HUYLFH&HQWHU
6+(1<$1*2)),&(
%(,-,1*2)),&(
+($'2)),&(
:8+$12)),&(
4,1*'$22)),&(
:8+$12)),&(
+<81'$,:,$,1',$
*8$1*=+282)),&(
6+$1'21*
+<81'$,:,$
-,$1*68
+<81'$,:,$
+<81'$,:,$
0DFKLQH7RROV&R/7'
Global Network
Changwon Office
153, Jeongdong-ro, Seongsan-gu, Changwon-si,
Gyeongsangnam-do, Korea (Zip Code : 642-110)
TEL : +82 55 280 9114 FAX : +82 55 282 9680
HYUNDAI WIA
MACHINE TOOL
Head Office & Factory
OVERSEAS OFFICES
HYUNDAI WIA America
Jiangsu HYUNDAI WIA
CHINA Chengdu Office
265, Spring Lake Drive, Itasca, IL, 60143
TEL : +1 201 489 2887
FAX : +1 201 489 2723
Company No.6 Fenghuang Road,
Fenghuang Town, Zhangjjagang City,
Jiangsu province, China
TEL : +86 512 5672 6808
FAX : +86 512 5671 6960
Room 2103, Block A, Times Plaza, No.2
Zongfu Road, Jinjiang District, Chengdu,
China
TEL : +86 28 8665 5550
FAX : +86 28 8666 2985
Shandong HYUNDAI WIA
CHINA Wuhan Office
L.A Office
11155 Knott Ave, STE B/C, Cypress, CA
90630, U.S.A
TEL : +1 714 373 5480
FAX : +1 714 373 5485
America Technical Center
39205 Country Club Drive Suite C-9,
Farmington Hills, MI 48310
TEL : +1 248 324 1056
FAX : +1 248 324 0989
HYUNDAI-KIA EUROPE GmbH
Kaiserleipromenade 5, D-63067
Offenbach, Germany
TEL : +49 69271 472 701
FAX : +49 69271 472 719
Raunheim Service Center
Kelsterbacher Strasse 51, 65479
Raunheim, Germany
TEL : +49 6142 9256 0 FAX : +49 6142 834 100
Company No.188 Shanghai Road, Rizhao
City, Shandong Province, China
TEL : +86 633 229 9031/5910
FAX : +86 633 229 9191/9199
China Sales Company
1-3F, Bldg6, No.1535 Hongmei Road, Xuhui
District, Shanghai, China, 200233
TEL : +86 21 6427 9885
FAX : +86 21 3431 0376
CHINA Beiging Office
Room 908, Hyundai Motor Building, No.38
Xiaoyun Road, Chaoyang District, Beijing,
China 100027
TEL : +86 10 8453 9850~2
FAX : +86 10 8453 9853
CHINA Guangzhou Office
Room 609, No.1 Yingbin Building 1#
Yingbin Blvd (Dashi Section) Panyu
District Guangzhou Ctiy, Guangdong,
China 511431
TEL : +86 20 8550 6595~6,
FAX : +86 20 8550 6597
Room 302, B tower, Donghe Center,
Dongfeng three road, Zhuankou,
Wuhan, Hubei, China
TEL : +86 27 5956 3256~7
FAX : +86 27 5952 3258
CHINA Qingdao Office
Room 1207, ZhaoYin Building, 36
HongKong Middle Road, Qingdao 266071,
PR China
TEL : +86 532 8667 9333~5
FAX : +86 532 8667 9338
CHINA SHENYANG Office
Room 1304, NO.53 Beizhan Road, Shenhe
District, Shenyang, China 110013
TEL : +86 24 3228 6640
FAX : +86 24 3228 6642
HYUNDAI WIA INDIA
48, Sur. No78-08. Kandamangalam Village,
Sengadu Post, Sriperumbudur Taluk,
Kancheepuram, Tamilnadu-602 105, India
TEL : +91 44 3717 6333
FAX : +91 44 3717 6363
LF2100/2600 SERIES
37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do,
Korea (Zip Code : 437-718)
TEL : +82 31 596 8209 Fax : +82 55 210 9804
Front Loading Turning Center
Uiwang Office
24
+
25
2014-08 002.002 ENG
HYUNDAI WIA AMERICA CORP. (Chicago Office) - 265, Spring Lake Drive, Itasca, IL, 60143 Tel +1 201 489 2887 Fax +1 201 489 2723
HYUNDAI WIA AMERICA CORP. (L.A. office) - 11125 Knott Ave. STE B/C Cypress, CA 90630 Tel +1 714 373 5480 Fax +1 714 373 5485
HYUNDAI WIA America Technical center - 39205 Country Club Drive Suite C-9, Farmington Hills, MI, 48310
Tel +1 248 324 1056 Fax +1 248 324 0989
en.wiamachine.co.kr