Transcript Dias nummer 1 - KvernelandGroup

Kverneland Baler-Wrapper
Combinations
Product Information 2015
Overview
FlexiWrap 6325 – 6716 - 6720
FlexiWrap
Bale Size
Rotor
Baler Concept
6325 SC-14
1.20x1.25
SuperCut 14
17 roller
6325 SC-25
1.20x1.25
SuperCut 25
17 rollers
6716 SC-14
1.20x0.6-1.65
SuperCut 14
5 belts/3 rollers
6716 SC-25
1.20x0.6-1.65
SuperCut 25
5 belts/3 rollers
6720 SC-14
1.20x0.6-2.00
SuperCut 14
5 belts/3 rollers
6720 SC-25
1.20x0.6-2.00
SuperCut 25
5 belts/3 rollers
Highlights
Film Rolls
Integrated Solution
Baler and wrapper
integrated in proven
chassis unit – baler is
easily changed
Film rolls are lowered
hydraulically for easy
and convenient
change.
Table Elevator
Low Table Height
Low table height for
gentle unloading. Bale
on end kit available.°
Complete wrapping
table will move towards
the baler – no steps inbetween.
Fast Wrapping
Twin satellite wrapper
for fast wrapping – will
always finish before
next bale is ready.
Conception - Design
•
•
•
Nice integrated looking solution
Good integration of the baler
Nice finishing
4
Conception - Design
•
•
Strong frame & design
Total frame in 3 building blocks
 Rear part, common to all
balers models and brands
 Front part, common for all
Vicon balers
 Special ‘adaptation parts’,
specific to baler model
 6325 SC14/25 N
 6716 SC14/25 N
 6720 SC14/25 N
5
Conception - Design
•
Replacment of baler possible
 Replacement of the baler unit
when baler is too old or worn out.
 High flexibility to switch from one
model to another one
 6325 to 6516 (or reverse)
 6516 to 6530 (or reverse)
 … etc
6
Conception - Design
•
Wrapping unit
 Double satellite solution
 Safety arm
•
Position (height) of the wrapping ‘tower’ adjustable in 3 position
7
Conception - Design
•
Wrapping table
 4 guide rollers for bale stability
 Low position for better machine
stability.
 Table is moving forward to catch bale
directly
 Gentle bale handling
 Fast transfer
 Perfect bale stability (even in hilly
conditions)
•
Fitted with 4 sensors
 Wrapping position
 Bale reception position
 Unloading position
 One sensor counting pulses of table
movement
8
Conception - Design
•
Hydraulic spare film roll bank
 Single acting
 Easy to operate
 Very comfortable film roll loading
•
10 spare film rolls storage
•
Need to be open for being able to
opening baler shielding
9
Conception - Design
•
Tandem axle
 High machine stability
 Better comfort
•
500/50-17 Vredestein Flotation+
 Improved stability even in fast
baling conditions
•
Dual-brake possibility
 Hydraulic brake
 Air brake
 Hydraulic + air brake optional
10
Conception - Design
•
Shielding adjustment
 Small modification of shielding
position is needed
 Adaptation parts need to be fit
 More ‘aggressive’ look
Functions – Bale Process
•
The combi is working on continious hydraulic flow
•
Machine gets the capability of working with loadsensing
•
Operation of complete machine is fully automatic
12
Functions – Bale Process
•
Electronic of the combi is separated
from baler one
 Easiest for exchange baler
•
The baler is running on is own
 Baling process as standard
 Tailgate is connected to the combi
hydraulic block
•
Wrapper control box is very simple
and easy to use
 Adjustment made once for all
 Fully automatic control
 Bale counter integrated
13
Functions – Bale Process
•
First electric signal for the combi
is coming from baler net binding
device
•
2 extra sensors are fitted to the
binding system on the baler
 Signal of net injection clutch
 Signal of net running
 Both signal are needed to avoid
any confusion in the system
14
Functions – Bale Process
•
When the binding start…
 Clutch sensor ‘on’ for few seconds
 + net run sensor ‘flashing’
•
•
… the wrapping table is coming close to the baler and wait for tailgate
opening
When binding stop…
 Net run sensor ‘stop flashing’
•
… tailgate is going to be opened
15
Functions – Bale Process
•
The tailgate is been fitted with an
angle measurement sensor
•
This sensor permit to control the
tailgate opening/closing position
and speed
 High opening / closing speed
 Reduce hydraulic flow just before
total opening or closing for a gentle
movement
 Table / tailgate advance control
movement for faster operation
16
Functions – Bale Process
•
Bale falls down on the table
–1 sensor get bale out signal
•
Table starts to move back
•
As soon as the table is far
enough, tailgate starts closing
–This allows to close the tailgate
as fast as possible: no waste of
time
•
During tailgate closing, the
wrapping table finish to reach
wrapping position
17
Wrapping Process
1
2
3
4
Functions – Bale Process
•
1 tailgate closed sensor has been
fitted on each tailgate hook
•
When tailgate properly closed,
baling can start again
19
Functions – Bale Process
•
When the table is in wrapping
position and the tailgate is closed,
the wrapping cycle starts
•
After few seconds after
wrapping process start, the
hydraulic pressure in the cut
and hold devices is removed
(float)
 No more pressure catching film
 Film is released naturally
 Pressure stay at 0 during all
cycle
20
Functions – Bale Process
•
When wrapping is finish, the driver
is inform about
•
To unload the bale, the user
needs to push unloading button
 This can also be made automatic
 Gives choice to driver where to
unload the bale
•
Table is going very close to the
ground for gentle unloading
•
Bale on end turner kit is available
21
The 5 Arguments, FlexiWrap
1
2
3
4
5
Integrated baler wrapper solution, with the option of fitting a
fixed or variable chamber baler. Baler unit can be replaced
when worn out.
Bale elevator moves the wrapping table to the baler – the
bale is dropped off directly onto the wrapping table – with
interferring steps in-between .
Low table height – bales are gentle dropped with no risk of
damage to the stretch film. Bale on end kit is available as
option
Fast wrapping process with twin satellites – the wrapper will
always finish before the next bale is finished.
Easy change of film rolls. The spare rolls are lowered
hydraulically for easy change. The FlexiWrap will carry 10
extra film rolls.