Transcript Power harrow range

Kverneland Foldable Power Harrow Range
Product Information 2015
Content
• NG-M
101_F20
• NG-H 101_F30
• NG-S 101_F35
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
Kverneland Foldable Power Harrows
NG-M 101 F20
NG-H 101 F30
NG-S 101 F35
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
Kverneland NG-M 101 F20
Foldable for tractors up to 200hp
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Solo operation
• Proven NG-M 101
trough design
• Strong foldable
structure in 4m and 5m
working width
• Close connection to the
tractor and easy to lift
• 1600 kg at 4m with
cage roller
• Ideal for mid class
tractors
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Trough
30 mm gears
Vertical rip,
connecting
Reinforcement
plate and trough
housing
Conical bearings,
47 mm distance
10 mm
reinforcement
plate
Shaft diameter
40 / 45 mm
(upper / lower
bearing)
Single piece
shaft and tine
carrier
2 standard shaft
seals, dirt protection
and oil sealing
Bolt on tines or
Quick Fit holder
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Quick Fit Tines
• Quick fit tines are available as
an option
• Tines are fixed by means of a
double pin
• Standard 12mm tines can be
used for both, bolt on or Quick
fit version
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Trough transmission concept
• Helical positioning of tines
• Improved performance
• Improved levelling
• Lower power requirement
• Safes fuel, lower cost per
hectare
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Side deflectors
• Design features taken over
from the rigid NG-M 101
• Parallelogram guidance
ensures perfect depth control
• Overload protected by coil
spring
• Wider radius at the front, to
ensure easy ground following
and help passing over big clods
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Depth adjstument
• Parallelogram hydraulic depth
adjustment
• Depth adjusted by clips and
hydraulic ram from tractor seat
• Ensures always parallel
implement and roller
• Packer roller scraper bar
always kept in fixed height from
the ground
• Maintenance free bushes and
fixed pins with forged heads
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Levelling bar
• Levelling Bar fixed to packer
roller beam
• Always correct height, no
adjustment needed if working
depth is changed
• Position fixed by pins, height
can be changed by spindle
adjustment
• Overload protected by coil
spring
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Driveline
• Central Mono-Speed Gearbox
• Overload protection in lateral
driveline, rated on 1800 Nm
Central
gearbox
• Lateral change gearbox
• Standard speed 327rpm
(23/34) at 1000rpm
• Optional 282 rpm (21/36 gears)
• Optional 351 rpm (24/33 gears)
Lateral
gearbox
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Technical data
Technical Data
NG-M 101 F20
Working width (m)
4,00
5,00
Transport width (m)
2,50
2,50
pto - input speed (rpm)
1000
Rotor Speed (rpm)
327 std. (282 and 351 optional)
Minimum hp requirement
100
Maximum hp allowed
125
200
Gearbox overload protection
1800 Nm per lateral drive_disc clutch
Number of rotors
16
20
Number of tines
32
40
Tine dimension (mm)
12 x 280
Bolted as standard – quick fit as option
Tines fitment
Weight with Packer Roller 500mm (kg)
Working depth adjustement
2370
2970
Hydraulic with rim spacers as standard
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-M 101 F20 – Main arguments
• Strong and light trough from
5mm with 10mm reinforcement
plate
• Trough design taken over from
rigid NG-M 101
• 200 HP driveline with lateral
change gearbox, allowing
different rotor speeds
• Complete choice of rear rollers
available
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
Kverneland Power Harrow NG-M 101 F20:
medium duty trough flexible foldable structure for high output
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
Kverneland
KvernelandNG-H
NG-H101_
101 F30
F30
For tractors
up to 300hp
Foldable
PH for tractors
up to 300hp
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101 F30 – Foldable Power harrow
• Overall design goes back
to the well-proven concept
of self supporting troughs
• New troughs design and
no lateral frames required
• Saves weight and gives a
tidy look to the machine
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101_F30 – Trough
Trough 6mm special profile
Height of gears 40mm
Double body trough all
length welded
Conical bearing int. Ø
45mm, outer Ø 85mm
Ø of shaft 45/50mm
Distance of bearings
55mm midth - midth
Cassette sealing
Conical bearing, int. Ø
50mm, outer Ø 100mm
Quick Fit tines as
standard
Tine holder bolted to the
trough, gives easy access
to the seals
Cone housing welded to
trough
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101_F30 – Trough key points
• Self supporting structure
• Conical bearing system
• High rigidity even when loaded
• Quick Fit Tines
• Simple clear design
• Easy and low maintenance
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101_F30 – Rotor Clearance
High Clearance of 95mm
with the following benefits:
• Allows residues and stones
95mm
to pass through easily
• Especially in combination
with active tines
• Gives easy access to
change the tines
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101_F30 – Quick Fit Tine
• Tines are fixed by pin and clip
• No tools necessary to change
tines
Pins fixed at top and bottom:
• No bending, no stress on the clip
Wide tine holder
• Reduces stress and wear of
tine and tine pocket
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101_F30 – Headstock
• Typical Kverneland Style
• Heavy duty design but light
• Prepared to carry precision
seed drills (by hydrolift)
• Oscillating lower link arms
• Category III linkage
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101_ F30 – Driveline
• Central Mono-Speed Gearbox
1000rpm input
Central
gearbox
• Overload protection in lateral
driveline, rated on 2200 Nm
• Lateral change gearbox
standard rotor speed is 336 rpm
(z 23 / 33 gears)
Optional
z 21 / 35 290 rpm
z 24 / 32 362 rpm
z 27 / 29 450 rpm
Lateral
gearbox
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101 F30 – Depth adjustment
• Parallelogram hydraulic depth
adjustment
• Standard with depth adjustment
by hydraulic ram from tractor seat
• Ensures always parallel
implement and roller
• Rims spacer for a quick and
precise setting
• Maintenance free bushes and
fixed pins with forged heads
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101 F30 – Depth control & floating
• Roller angle remains the same, when
changing work depth
• The change of working depth is done
hydraulically from the tractor seat
whereas maximum depth is set by
spacer shims on the rams.
• The coulter bar is fitted directly to the
roller frame and provides – once
adjusted – constant sowing depth, no
matter to which working depth the
power harrow is being set.
• Free floating of the lateral troughs via
tractor spool or valve block.
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101 F30 – Levelling bar
• Levelling Bar fixed to roller beam
• Adjustable in 10 different
position by a pin; easy
management by an efficient
handle
• Always correct height, no
adjustment needed if working
depth is changed
• Overload protected by rubber
stopper
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101_F30 – Side deflector
• Side deflectors guided with two
parallelograms fitted in front and
in the rear
• Spring loaded security
• Reliable construction
• Possibility to move up and
downwards to follow the ground
contours
• Flexible to open sideways to
prevent stones and big clods
from being trapped
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101_F30 – Packer roller attachment
• Central adjustable scraper bar
• Low positioned scraper
together with single welded
crests provide optimum selfcleaning effect in sticky soils
• Extra frame gives more
stability to the roller, important
in combination with heavy
seed drills
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101 F30 – Coulter bar attachement
• Rear roller linked to the power harrow via
parallelograms
• Roller angle remains the same, when
changing work depth
• The coulter bar is fitted directly to the
roller frame and provides – once adjusted
– constant sowing depth, no matter to
which working depth the power harrow is
being set.
• All hydraulic and electric coulter bar
functions are fitted to a junction for clean
and easy connection
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101 F30 – Coulter bar functions
• When being combined with a DF1
or DF2 coulter bar, all hydraulic
functions are centralized on the
power harrow’s headstock.
• A control panel allows operation of
5 different functions from the cabin using just one double acting tractor
spool.
• LS version for power beyond
connection also available
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101 F30 – Marker arms
• Hydraulic operated via sequence
valve and double acting ram,
pushing the arm out
• Overload protection with shear bolt
• Arm can be placed in 3 positions
by the shear bolt
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-H 101 F30 – Technical data
Technical Data
NG-H 101 F30
Working width (m)
4,00
4,50
5,00
6,00
Transport width (m)
2,50
2,50
2,50
2,50
pto - input speed (rpm)
1000
Rotor Speed (rpm)
336 std. (290, 362 and 450 optional)
Minimum hp requirement
130
140
Maximum hp allowed
150
160
300
Gearbox overload protection
2200 Nm per lateral drive_automatic clutch
Number of rotors
16
18
20
24
Number of tines
32
36
40
48
Tine dimension (mm)
15 x 320
Tines fitment
Quick fit as standard
Weight with Packer Roller 500mm (kg)
2560
Working depth adjustement
2400
NG-M
series
2790
3140
3450
Hydraulic with rim spacers as standard
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
91150C
5090
NG-H 101_F30 – Main arguments
• Self supporting trough with welded
rotor cone – 4 rotors per meter
• Quick FitTM tines as a standard
• Conical bearings. 95mm clearance
• No extra support between
headstock and trough – clear and
tidy appearance of the machine
• Complete choice of rear rollers
available
• Possible to combine with coulterbar
or hydraulic hitch for precision seed
drill combination
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
Kverneland NG-S 101 F35
Foldable for tractors up to 400hp
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Foldable Power harrow
• Overall design goes back
to the well-proven concept
of self supporting troughs
from the rigid NG-S 101
range
• No lateral frames required
• Versatile in use and
suitable to carry
coulterbar or precision
seeders
2400
NG-M
series
91150C
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Trough details
Height of gears 50 mm
Trough 10mm special profile
Self supporting trough = no
additional frame is required
Conical bearing int. Ø
55mm outer Ø 95mm
Distance of bearings 80
mm midth - midth
Distance bushing 50 mm
Conical bearing int. Ø
60mm outer Ø 100mm
Ø of shaft 55/60 mm - high
resistance
Welded shaft housing –
No influence of vibrations
Double sealing with fixing on
tine holder
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Trough key points
• Self supporting structure
• Conical bearing system
• High reliability
• Quick Fit Tines
• Simple clear design
• Easy maintenance
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Loads to a trough
Radial stress:
compensated by
bearing distance standard technology
Axial stress: compensated by conical bearings
More and more important in the future due to
bigger hoppers of seed drills and higher
charge of active tines
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Rotor Clearance
High clearance gives benefits:
• Allows residues and
stones to pass through
easily
125 mm
• Especially in combination
with active tines
• Gives easy access to
change the tines
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Quick Fit Tine
• Tines are fixed by pin and clip
• No tools necessary to change tines
Pins fixed at top and bottom:
• No bending, no stress on the clip
Wide tine holder
• Reduces stress and wear of
tine and tine pocket
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Side deflector
• Side deflectors guided with two
parallelograms fitted in front and
in the rear
• Spring loaded system
• Reliable and simple construction
• Possibility to move up and
downwards to follow the ground
contours
• Flexible to open sideways to
prevent stones and big clods
from being trapped
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Gearbox & Transmission
• 3-speed central lever box (plus
neutral) for 246, 326 and 387rpm at
rotors
• Intake pto far in the back and 95cm
from ground level -> Low angle, nice
geometry
• With rear pto connection standard
• Lateral single speed gearbox with
torque limiter (2,5 Kn) in lateral drives
• As option 2-speed lever gearbox (326
and 387rpm) for higher power tractors
up to 400hp
Central
gearbox
Lateral
gearbox
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Rear roller connection
• Rear roller linked to the power
harrow via parallelogram
system
• Roller angle remains the same,
when changing work depth
• The change of working depth is
done hydraulically from the
tractor seat whereas maximum
depth is set by spacer shims on
the rams.
• Many different roller types are
available for every soil
conditions
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Coulter bar
• The coulter bar is fitted directly
to the roller frame and provides
– once adjusted – constant
sowing depth, no matter to
which working depth the power
harrow is being set.
• All hydraulic and electric coulter
bar functions are fitted to a
junction for clean and easy
connection
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Coulter bar
• When being combined with a DF1
or DF2 coulter bar, all hydraulic
functions are centralized on the
power harrow’s headstock.
• A control panel allows operation of
5 different functions from the cabin using just one double acting tractor
spool.
• LS version for power beyond
connection also available
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Marker arms
• Hydraulic operated via sequence
valve and double acting ram,
pushing the arm out
• Overload protection with shear bolt
• Arm can be placed in 3 positions
by the shear bolt
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Hydrolift
• As option hydraulic device is
available to carry precision
seeders
• Load capacity up to 2,5 tons
• Adjustable arms to connect all
types of seeders
• Stop valve (as option) to limit lift
of the carried implement in the
headland
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
NG-S 101 F35 – Technical data
Technical Data
NG-S 101 F35
Working width (m)
4,00
4,50
5,00
6,00
Transport width (m)
2,50
2,50
2,50
2,50
pto - input speed (rpm)
1000
Rotor Speed (rpm)
246, 326 or 387 and neutral position
Minimum hp requirement
140
150
Maximum hp allowed
160
180
400
Gearbox overload protection
2500 Nm per lateral drive_automatic clutch
Number of rotors
16
18
20
24
Number of tines
32
36
40
48
Tine dimension (mm)
18 x 330
Tines fitment
Quick fit as standard
Weight with Packer Roller 500mm (kg)
2800
Working depth adjustement
2400
NG-M
series
3050
3500
3900
Hydraulic with rim spacers as standard
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
91150C
5090
NG-S 101 F35 – Main arguments
• Self supporting trough with 10 mm
upper casing, welded ram
connections and heavy duty
headstock
• Conical bearings
• Quick FitTM tines as a standard
• 400 hp 2 speed lever gearbox
allows biggest tractors to be put in
front
• Trough bottom and tine carrier
from the rigid NG-S model
• Complete choice of rear rollers
available
2400
NG-M
series
2500
NG-H
series
91150C
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090
Kverneland Power Harrow NG-S 101 F35:
High performance and robustness for
large professional farming!
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
91150C
5090
visit us at www.kvernelandgroup.com
The Future of Farming
www.kverneland.com
See our
Machines
at work
on YouTube
91150C
2400
NG-M
series
2500
NG-H
series
NG-S
3000
series
4000
NG-Sseries
F35
4062C
5090