Transcript Solar Electric Power generation

Solar Electric Power generation
• Two types:
– Thermal -use sun’s ability to heat (usually water)
to create electricity
– Photovoltaic devices- a device which directly
converts the Suns energy to electricity
Solar Thermal
• Obvious idea would be to use sunlight to boil
water and provide steam to drive a turbine
• But what happens when you place a container
of water in the sun-it typically does not boil!
• Need to concentrate or focus the sun’s energy
to achieve this goal
• How do we focus sunlight?
Basic properties of light
• To answer this question, lets look at some basic
properties of light in the wave description of light.
• Refraction-light is bent at the interface between two
media.
• Snell’s law relates the angle
of incidence and the index
of refraction of medium 1 to
the angle of refraction and
index of refraction of medium
2.
Focusing light
• If the interface is flat,
the light is not focused.
• Example-pencil in a
glass of water
• If it is curved in the
correct fashion, i.e. the
surface of a convex lens,
the light can be brought
to a focus
convex
concave
Fresnel Lens
• For the most part, lens
are very heavy, suffer
from reflection at the
surfaces, and are
expensive to construct to
the sizes needed to
achieve the desired
heating.
• There is one type of lens,
a Fresnel lens that can be
inexpensively constructed
from plastic
Fresnel Lens
• Seen in lighthousesused to form a
concentrated beam of
light.
Fresnel Lens at work
• Fresnel lens melting
brick
• International
Automated Systems
Fresnel system
Reflection
• When light is incident
on a surface, it can be
reflected
• An interesting result is
that the angle of
incidence (incoming
angle) equals the angle
of reflection (outgoing
angle.
Reflection from a curved surface
• When the surface doing
the reflecting is curved,
the light can be brought
to a focus.
• The curved surface can
be parabolic or
spherical.
• Spherical surfaces are
cheaper and easier to
construct.
Power towers
• Use many collectors and
focus the light to a central
point.
• Achieves high
temperatures and high
power density.
• Each individual collector
is called a heliostat
• Must be able to track the
sun and focus light on the
main tower
How they work
•
•
•
•
•
•
Light is collected at the central tower,
which is about 300 feet tall. There are
on the order of 2000 heliostats.
Used to heat water and generate
steam
Steam drives a turbine which
generates electricity
Often include auxiliary energy
storage to continue to produce
electricity in the absence of sunlight
More costly to construct and operate
than coal fired plants.
Good candidates for cogenerationwaste steam could be used for space
heating
Solar troughs
• A parabolic shaped
trough collects the light
and focuses it onto a
receiver.
• The receiver has a fluid
running through it which
carries the heat to a
central location where it
drives a steam turbine
• May have more than a
hundred separate troughs
at such a facility
Trough Pictures
Direct Conversion of sunlight to energy:
Photo-voltaics
• Photoelectric effect:
• When electromagnetic energy impinges upon a
metal surface, electrons are emitted from the
surface.
• Hertz is often credited with
first noticing it (because he
published his findings) in 1887
but it was seen by Becquerel
In 1839 and Smith in 1873.
Photoelectric effect
• The effect was a puzzle
• The theory of light as a wave did not explain the
photoelectric effect
• Great example of the scientific method in action.
– Up until this point, all the observations of light were
consistent with the hypothesis that light was a wave.
– Now there were new observations could not be
explained by this hypothesis
– The challenge became how to refine the existing
theory of light as a wave to account for the
photoelectric effect
Photoelectric effect explained
• Einstein in 1905 explained the photoelectric
effect by assuming light was made of discrete
packets of energy, called photons.
• Not a new idea, he was building upon an idea
proposed by Planck, that light came in discrete
packets. (in fact, Newton proposed a particle like
explanation of light centuries earlier). The
problem for Planck was his discrete packets were
in conflict with the wave like behavior of light.
Photoelectric effect explained
• But now, a behavior of light was observed that fit
Planck’s energy packet idea.
• So electromagnetic radiation appears to behave
as if it is both a wave and a particle.
• In fact, you can think of light as discrete wave
packets-packets of waves which, depending upon
the measurement you make, sometimes exhibit
particle behavior and sometimes exhibit wave
behavior.
• Einstein won the Nobel prize for his explanation
of the photoelectric effect.
Semi conductors
• Devices which have conductive properties in
between a conductor and an insulator.
• Normally, the outer (valence) electrons are
tightly bound to the nucleus and cannot
move.
• If one or all of them could be freed up, then
the material can conduct electricity
• Silicon is an example of a semi-conductor.
Silicon
•
•
•
•
Element 14 in the periodic table
Very common element (sand, glass composed of it)
8th most common element in the universe
Its 4 outer valence electrons are normal tightly bound
in the crystal structure.
• However, when exposed to light, the outer electrons
can break free via the photoelectric effect and conduct
electricity.
• For silicon, the maximum wavelength to produce the
photoelectric effect is 1.12 microns. 77% of sunlight is
at wavelengths lower than this.
But its not quite this simple
• You also need to produce a voltage within the silicon to
drive the current.
• So the silicon must be combined with another material.
This process is called doping.
• 2 types of doping: P and N
– If you replace one of the silicon atoms in the crystal lattice
with a material that has 5 valence electrons, only 4 are
need to bond to the lattice structure, so one remains free.
The doped semi conductor has an excess of electrons and
is called an N type semiconductor.
– Doping elements can be arsenic, antimony or phosphorus.
P-types
• If you dope with an element with only 3 valence
electrons, there is a vacancy, or hole left where the 4th
electron should be.
• If the hole becomes occupied by an electron from a
neighbor atom, the hole moves through the
semiconductor. This acts like a current with positive
charge flowing through the semi conductor, so it
appears to have a net positive charge
• Called a P-type semiconductor.
• Doping elements could be boron, aluminum, or indium