Latching SMA Microactuator
Download
Report
Transcript Latching SMA Microactuator
Multilayer Microfluidics
ENMA490
Fall 2003
Brought to you by:
S. Beatty, C. Brooks, S. Dean, M. Hanna, D. Janiak, C. Kung,
J. Ni, B. Sadowski, A. Samuel, K. Thaker
Problem Definition
Motivation
– BioMEMS research is
growing rapidly, but
restricted to single layer
microfluidics
– Development of a multilayer
microfluidic design would
increase flexibility
Goal
– Design, construct, and test
a controllable microfluidic
device with at least two fluid
levels.
– Identify appropriate
materials, processes, and
device geometries.
Problem Scope
Requirements
– To make a two-level microfluidic device
– To incorporate active control elements
Constraints
– Assume external fluid control
– Neglect biochemical reactions in channels
– Keep design feasible for manufacturing
Initial Material Choices
Narrowing Materials Choices
Desired Mechanical and electrical
properties
Process considerations
Project Development
Device Design: Stage 1
(Initial Microchannel Design Concept)
• Device Logic
Device Design: Stage 1
(Initial Microchannel Design Concept)
Device Design: Stage 2
(Modified Microchannel Design)
• Device Logic
Device Design: Stage 2
(Modified Microchannel Design)
Device Design: Stage 2
(Modified Microchannel Design)
• Manufacturing and experimental results
Device Design: Stage 3
(Pressure Actuated Valve Design)
• Device Logic
Device Design: Stage 3
(Pressure Actuated Valve Design)
Device Design: Stage 3
(Pressure Actuated Valve Design)
• Simulation PDMS deflection
Device Design: Stage 3
(Pressure Actuated Valve Design)
• Flow modeling
Device Design: Stage 3
(Pressure Actuated Valve Design)
• Manufacturing and experimental results
Alternative Designs
Future Work
Summary