Mission Statement
Download
Report
Transcript Mission Statement
MISSION STATEMENT
OUR GOAL IS INFORM EVERYONE WHY SUSQUEHANNA SERVICES IS
THE MOST EFFICIENT, WELL ORGANIZED AND ENVIRONMENTALLY
SOUND BACKYARD COMPANY IN THE INDUSTRY.
• SUSQUEHANNA
SERVICES PROVIDES A VARIETY OF SPECIALIZED METHODS TO GUARANTEE THE
PROPER HANDLING OF ALL YOUR BACK YARD NEEDS.
• OUR EMPLOYEES
POSSIBLE.
ARE EQUIPPED WITH THE SKILLS AND TOOLS TO GIVE YOU THE BEST SERVICE
• WE
UNDERSTAND THE CONSTANTLY CHANGING INDUSTRY. SUSQUEHANNA SERVICES STRIVES
TO STAY AHEAD OF THESE DEMANDS AND EXCEL ON A DAY TO DAY BASIS.
• WITH
SAFETY AS OUR NUMBER ONE PRIORITY WE PROVIDE TRAINING, CERTIFICATIONS AND A
CONSTANT AWARENESS TO THE WELL-BEING OF OUR CUSTOMERS AND EMPLOYEES!
OUR EQUIPMENT
• PUGMILLS
• DRYER SHAKERS
• V-BOTTOM
FLUID TANKS
• LIME SILOS
• HALF ROUNDS
• EXCAVATORS
• BIG BOWL CENTRIFUGES
• SUBMERSIBLE
PUMPS
• OPEN TOP FRAC TANKS
WHAT IS A PUGMILL?
A PUGMILL IS A SERIES OF AUGERS AND PADDLES THAT ALLOW
FOR THE MIXING AND SOLIDIFICATION OF DRILL CUTTINGS IN A
MANNER THAT ELIMINATES LIME DUST, WET LOADS AND THE
USE OF LIME DELIVERED IN STANDARD ROLL OFF BOXES.
A PUGMILL IS THE MOST EFFICIENT WAY TO MIX DRILL
CUTTINGS.
USING A PUGMILL ALLOWS FOR LESS LIME WASTED AND LESS
HAUL OFF. THIS IS ACHIEVED BY OUR WELL TRAINED
EMPLOYEES MINIMIZING THE AMOUNT OF LIME USED WHILE
MONITORING THE CUTTINGS. LOWERING THE TOTAL COST OF
BACK YARD OPERATIONS.
DAILY COSTS WILL BE REDUCED USING OUR SYSTEM
AND THE
BACKYARD WILL BE KEPT CLEAN AND WELL ORGANIZED.
HOW IT WORKS?
• THE DRYER SHAKERS SIT BELOW THE RIGS
PRIMARY SHAKERS
•
THE CUTTINGS ARE TRANSFERRED DIRECTLY
FROM THE DRYERS INTO THE PUGMILL
SEPARATING THE FLUIDS AND SOLIDS
•
THE FLUIDS FALL INTO AN AGITATED V-BOTTOM
TANK UNDER THE DRYERS FROM THERE THEY ARE
PROCESSED BY THE CENTRIFUGE.
• THE SEPARATED SOLIDS DROP INTO THE AUGER
TANK, THEN ARE MIXED WITH LIME AND
SOLIDIFIED.
AIR DRILLING
• WHILE AIR DRILLING THE FLUIDS ARE
DRILLED WITH THE USE OF THE
MATHENA ‘SHALE SEPARATOR’ OR BY
USING THE MARYBETH.
•
ALL CUTTINGS ARE DISCHARGED
DIRECTLY INTO A HALF ROUND. A
HYDRAULIC SUBMERSIBLE PUMP
DIRECTLY PULLS FROM THE
DISCHARGE PUMPING THE CUTTINGS
AND FLUIDS DIRECTLY ONTO THE
DRYER SHAKERS.
CUTTINGS PUMPED
OVER DRYER SHAKERS
VIDEO
BIG BOWL CENTRIFUGES
WE
USE A BIG BOWL C.F. TO
PULL FROM THE V-BOTTOM
AGITATED TANK TO PROCESS
DIRTY WATER AND O.B.M
BENEFITS:
WILL DEWATER
SUCCESSFULLY
TO PROMOTE REUSE OF WATER
FOR CONTINUOUS DRILLING
CUT COST OF SOLIDIFYING ALL
DIRTY WATER AND CUT COSTS
ON OFF-SITE WATER TRUCKS
ALL WATER
ON LOCATION IN
FRAC TANKS AND PITS CAN BE
PROCESSED IN THE C.F
.
WATER PROCESSED IN
CENTRIFUGE FINAL PASS
VIDEO
SUSQUEHANNA SERVICES IS RAPIDLY EXPANDING IT’S
PRESENCE IN THE INDUSTRY. WE ARE COMMITTED TO ACHIEVE
AT A HIGHER LEVEL. OUR GOAL IS TO PROVIDE OUR
CUSTOMERS AND EMPLOYEES WITH A STRUCTURED, RELIABLE
RELATIONSHIP, WITH A PRIMARY FOCUS ON SAFETY.