Transcript Document

SUPERIOR INDUSTRIAL
SOLDERING PRODUCTS
In 1949, Superior introduced Superior
Supersafe® No. 30. Though formulated as
an OA flux for electronics, it is used for
many industrial applications.
 In 1995, Superior introduced the zincchloride-free, ZC-Free™ line of industrial
fluxes to help eliminate heavy-metal
residues from industrial soldering
applications.

PRODUCT LINE







Zinc Chloride fluxes
ZC-Free™ fluxes
Non-Chloride fluxes
Battery Fluxes
Babbitting Flux
Aluminum Soldering
Industrial Pastes
SOLDER APPLICATIONS
LOW-MELT FUSIBLE ALLOYS
 Tin-Bismuth, Tin-Indium solder alloys.
STANDARD TIN/LEAD SOLDERS
 63/37, 60/40, 50/50, 40/60, 30/70 and many
others.
LEAD-FREE SOLDERS
 96Sn/4Ag, 97Sn/3Cu, and many others
ALUMINUM SOLDERS
 91Sn/9Zn and other Sn/Zn; 98Zn/2Al.
BABBITTING
 Tin and lead-based babbit alloys.
PROCESS APPLICATIONS






Dip Soldering
Drag Soldering
Linear Insert Soldering
Induction Soldering
Torch Soldering
Hand soldering
WHERE ARE FLUXES USED?







Cable Tinning
Plumbing Fixtures
Stained Glass
Radiators
Wire Harnesses
Batteries
Bearings
ZINC CHLORIDE FLUXES
High activity fluxes for copper, brass,
bronze, stainless steel, and many different
base metals.







Superior No. 22 Copper Flux
Superior No. 23 Stainless Steel Flux
Superior No. 71 High-Activity Stainless Steel Flux
Superior No. 75 General Purpose Soft Solder Flux
Superior No. 79 Acid-Free Flux
Tara 330 General Purpose Flux
Tara 340 High Activity Flux
ZC-FREE™ FLUXES
Fluxes formulated using non-heavy-metal activators
that comply with water-emission levels in cities,
States and regions monitoring water purity levels.







Superior Supersafe® No. 30 OA Flux
Superior Supersafe® No. 30 Double Strength OA Flux
Superior No. 65 IA Flux contains ammonium chloride
Superior No. 67 OA Flux
Superior No. 68 OA Flux
Superior No. 515 IA Non-Chloride Flux
Superior No. 510 IA Non-Chloride Flux
BATTERY FLUXES
Non-Chloride fluxes formulated to meet
the high temperature requirements for
Cast-on-Strap soldering applications.
 Superior
No. 155, solvent-based flux
 Superior No. 550, water-based flux.
 Superior No. 555C water-based flux with
broad dilute ratios.
BABBITTING
Flux crystals used on babbit alloy and other
baths to eliminate dross; sprinkled into joints
producing consistent intermetallic bonds;
ensure best finish with oxide reduction
post-babbitting.
Tara 350 Soft Soldering Crystals
 Superior No. 27 Soldering Salts

ALUMINUM SOLDERING
Soft-soldering with Tin/Zinc solder:
 Superior No. 1260
High-temperature soldering using
Zinc/Aluminum alloy
 Superior No. 1280
INDUSTRIAL FLUX AND
SOLDER PASTES
Superior No. 144 is the base for soldering
copper, brass, bronze, and stainless
steel.
Additional pastes are available in rosin
formulations.
All can be formulated for tin/lead and
lead-free solder alloy powders.