Transcript Cube SuperComputers

Cube SuperComputers
Cube Technology
Patent Pending
Single Cell 5.0972” cube
IC space x,y,z side view
2D from single cell side view.
Measurements
Cell is build solid than the copper pipe area is etched out
Copper cooling plains between each slice across the whole cell
Slices in 3.75”
Measurements can be changed for
your or my applications
2D single cell Top View
Processors/Memory cell
Top down Another way
Top down ssd
Top down Network fabric
Top down satellite
Single Cell.
one cell = 5.0972
192 slices.
3072 processors.
1 nitrogen tunnel at 85K.
300mm tools.
RF transmit/receive I/O.
tunnel is built solid then
etched out.
15.2916x15.2916
x15.2916 .
450mm tools.
5184 slices of
processors.
82944 processors.
27 cells per cube.
1 Megawatt of
wireless power.
Wireless digital I/O
9 nitrogen gas lines
per cube at 85K.
15.2916x15.2916
x15.2916 .
450mm tools.
video cube.
27 cells per cube.
1 Megawatt of
wireless power.
Wireless digital I/O
9 nitrogen gas lines
per cube at 85K.
Telsa’s Spiral from the top of the power supply to the DC transfer of
power to the bottom 5mm’s of the cube. Nano spirals of copper in the
bottom of the cube goto each slice.
Back plane, chipset, fiber optics, normal chips
back plane to back plane new bus
primary and secondary motherboards
Cube building 2nd floor layout
Copper pipe, flex pipe, rigid pipe at 85K. This is close to the
updated version. Connector size of the pipes was to close
together. Spray insulation completely covers the copper pipes.
Full Product View. The red piping
needs to be changed a little.
This is the leaded PCB connected to the cube.
RF layout should have copper wire
connecting copper rods in cubes
RF output converts to fiber optic above cube. PSU might need 1 cooling line
Cube Supercomputers
• My company is going to produce all full size cubes
from each company’s designs.
• North bridge main controller will be near the
center of the building on the 2nd floor in the
backplane. All sub-north connections will goto
the north bridge main controller. I don’t currently
know how many connections that will be. RF and
10Gb network supports more signals then lead
connections. All connections will be converted to
fiber optic going to the center of the building.
Inventor and CEO
• Richard John Harris II
• (254)350-0470
• [email protected]
• Copperas Cove, Tx 76522
• Near Austin, Tx . Company Location.