Transcript Slide 1
Basic Blood Gas Interpretation 205b Values Measured • PaO2 – amount of oxygen in the arterial blood • SaO2 – percent saturation of the hemoglobin as measured by a CO-oximeter Values Measured • SpO2 – percent saturation of the hemoglobin as measured by a pulse oximeter • Hb – amount of hemoglobin present Values Measured • Hct (Hematocrit) – percent of the blood that is composed of cells • pH – concentration of hydrogen ions (H+) in the arterial blood Values Measured • PaCO2 – amount of carbon dioxide in the arterial blood • HCO3ˉ – amount of bicarbonate in the arterial blood Values Measured • B.E. (base excess/base deficit) – the total of all buffering systems in the arterial blood • CO – amount of carbon monoxide present in the arterial blood Determination of Oxygenation • Normal Values – PaO2 • 80 – 100 mmHg – Mild hypoxemia • 60 – 79 mmHg – Moderate hypoxemia • 40 – 59 mmHg – Severe hypoxemia • < 40 mmHg – SaO2 • 93% – 97% • 88-92% COPD/lung disease – Hb • Males: 13.5 – 16.5 g/dl • Females: 12 – 15 g/dl – Hct • Males: 42 – 54% • Females: 38 – 47% Determination of Oxygenation • Normal Values – CaO2 • Males: 17.1 – 21.7 ml/dl • Females: 14.9 – 19.7 ml/dl – COHb • <3% Method of Determining Oxygenation • Evaluate the PaO2 – 80 – 100 mmHg: normal oxygenation – > 100 mmHg: hyperoxygenation – 60 – 79 mmHg: mild hypoxemia Method of Determining Oxygenation • Evaluate the PaO2 – 40 – 59 mmHg: moderate hypoxemia – < 40 mmHg: severe hypoxemia Method of Determining Oxygenation • Evaluate the SaO2 – > 93%: normal oxygenation – < 93%: may be hypoxemic; examine the hemoglobin Method of Determining Oxygenation • Evaluate the Hb – 12 – 16 g/dl: normal – < 12 g/dl: anemic – > 16 g/dl: polycythemic Method of Determining Oxygenation • Evaluate the CaO2 – 17 – 20 ml/dl: normal – 15 – 17 ml/dl: mild hypoxia – 12 – 14.9 ml/dl: moderate hypoxia – < 12 ml/dl: severe hypoxia Method of Determining Oxygenation • Other factors in oxygenation – Abnormal forms of hemoglobin: • Detectable by CO-oximeter, not pulse oximeter Estimate PaO2 • Predicated PaO2 based on age= Estimated value of what there PaO2 might be • • PaO2= 110 – half the person’s age • example: 20 year old. 110 – 10= PaO2 100 • • (PaO2 of 60 will equal approximately 90% saturation based on the oxyhemoglobin curve) Determination of Acid Base Balance • pH is equal to the –log of the hydrogen ion – pH = – Log [H+] Determination of Acid Base Balance • Henderson-Hasselbalch equation – pH = pK + Log HCO3 H2CO3 – pH = pK + Log HCO3 (Renal) Paco2 x0.03 (Lungs) Determination of Acid Base Balance • pH measures the blood’s acidity or alkalinity – Must always be determined first when assessing acid- base balance Determination of Acid Base Balance • PaCO2 is our stimulus to breathe – A high PaCO2 indicates that not enough carbon dioxide is being exhaled – A low PaCO2 indicates that too much carbon dioxide is being eliminated Determination of Acid Base Balance • Evaluate base excess or bicarbonate (metabolic parameter) – Is it acidic or alkaline – 22- 26 mEq/L is normal – > 26 Indicates metabolic alkalosis – < 22 Indicates metabolic acidosis Determination of Acid Base Balance • Bicarbonate is the base or buffer that “neutralizes” hydrogen ions (HCO3) • Bicarbonate is made in the red blood cells, liver, and kidney Determination of Acid Base Balance • When bicarbonate levels are elevated, an excess of alkalinity exists in the metabolic systems • When bicarbonate levels are low, an excess of acidity exists in the metabolic systems Determination of Acid Base Balance • If the pH is not normal, identify whether it is acidic or alkaline Determination of Acid Base Balance • Identify whether the PaCO2 or bicarbonate disturbance (acidosis or alkalosis) matches The pH change (acidosis or alkalosis) – This is the “cause” of the problem and represents where treatment should be directed. (e.g. if pH is acidic, PaCO2 is alkaline and bicarbonate is acidic, the problem is a metabolic acidosis) Determination of Acid Base Balance • If the pH is not 7.40 but within the normal range (7.35 - 7.45), the disturbance is fully compensated • If both the respiratory and metabolic parameters match the pH, the problem is a combined disturbance Determination of Acid Base Balance • A change in the opposite direction (acidosis or alkalosis) by the parameter (PaCO2 or bicarbonate) that does not match the pH is an attempt to restore the pH (referred to as partial compensation) Evaluation of Compensation pH Normal PaCO2 Normal HCO3 Normal Normal Acid-Base Balance PaCO2 Elevated HCO3 Elevated Fully Compensated Respiratory Acidemia or Fully Compensated Metabolic Alkalemia PaCO2 Decreased HCO3 Decreased Fully Compensated Respiratory Alkalemia of Fully Compensated Metabolic Acidemia Arterial Punctures • Indications1 – Need to evaluate ventilation, acid-base balance, and oxygenation of blood – Assess the patient’s response to therapy – Monitor and assess the severity and progression of a disease process 1 Excerpt from the AARC Clinical Practice Guideline for Sampling for Arterial Blood Gas Analysis Arterial Punctures • Contraindications1 – Negative Allen test – Presence of a surgical shunt proximal to the sample site http://www.youtube.com/watch?v=HRcVVGBb9fg 1 Excerpt from the AARC Clinical Practice Guideline for Sampling for Arterial Blood Gas Analysis Dialysis shunt Arterial Punctures • Contraindications1 – Presence of a lesion at the sample site – Coagulopathy or medium to high dose anticoagulation therapy (relative contraindication) 1 Excerpt from the AARC Clinical Practice Guideline for Sampling for Arterial Blood Gas Analysis Hematoma Arterial Punctures • Hazards and complications1 – Arteriospasm – Air or clotted blood emboli – Hematoma 1 Excerpt from the AARC Clinical Practice Guideline for Sampling for Arterial Blood Gas Analysis Arterial Punctures • Hazards and complications1 – Hemorrhage – Pain – Arterial occlusion 1 Excerpt from the AARC Clinical Practice Guideline for Sampling for Arterial Blood Gas Analysis Arterial Punctures • Hazards and complications1 – Trauma to the vessel – Vasovagal response – Patient or sample contamination – Anaphylaxis (if local anesthetic used, Xylocain) 1 Excerpt from the AARC Clinical Practice Guideline for Sampling for Arterial Blood Gas Analysis Arterial Punctures • Assessment of need for arterial sample1 – Initiation, change, or discontinuation of therapy (oxygen or ventilatory support) – History and physical indicators 1 Excerpt from the AARC Clinical Practice Guideline for Sampling for Arterial Blood Gas Analysis Arterial Punctures • Assessment of need for arterial sample1 – Presence of other abnormal diagnostic tests or findings – Baseline study for pulmonary rehabilitation program 1 Excerpt from the AARC Clinical Practice Guideline for Sampling for Arterial Blood Gas Analysis Arterial Punctures • Frequency of monitoring1 – Dependent upon clinical status of the patient and presence of indications – If frequent monitoring required, use alternating sites or indwelling arterial catheter 1 Excerpt from the AARC Clinical Practice Guideline for Sampling for Arterial Blood Gas Analysis Arterial Punctures • Allen Test – Performed to determine presence of adequate collateral circulation in the hand – Cannot be used with uncooperative or unconscious patients Arterial Punctures • Allen Test – Procedure • Have patient clench hand into a tight fist • Apply pressure to occlude flow through the radial and ulnar arteries • Open hand; observe to ensure that the palm and fingers are blanched Arterial Punctures • Allen Test – Procedure • Remove pressure from the ulnar artery • Observe time necessary for flushing of hand • Test is negative for collateral circulation if flushing does not occur within 20 seconds; an alternative site is chosen The Modified Allen Test The modified Allen test. A, The hand is clenched into a tight fist and pressure is applied to the radial and ulnar arteries. B, The hand is opened (but not fully extended); the palm and fingers are blanched. C, Removal of pressure on the ulnar artery should result in flushing of the entire hand. Which Artery to Choose? • The radial artery is superficial, has collaterals and is easily compressed. It should almost always be the first choice. • Other arteries (femoral, dorsalis pedis, brachial) can be used in emergencies. Preparing to perform the Procedure: • Make sure you and the patient are comfortable. • Assess the patency of the radial and ulnar arteries. Procedure For Obtaining an Arterial Sample (Radius) • Confirm the order in the patient’s chart • Note any contraindications and notify physician if any exist Procedure For Obtaining an Arterial Sample (Radius) • Ensure that patient is in a steady state (no changes in oxygen status for at least twenty minutes) • Obtain and assemble necessary equipment Procedure For Obtaining an Arterial Sample (Radius) • Wash hands, don protective equipment, explain the procedure to the patient • Position the patient correctly Procedure For Obtaining an Arterial Sample (Radius) • Perform an Allen test and confirm collateral circulation • Cleanse the site with 70% isopropyl alcohol or other antiseptic Procedure For Obtaining an Arterial Sample (Radius) • Inject local anesthetic, if hospital protocol • Heparinize the syringe, if not already heparinized Procedure For Obtaining an Arterial Sample (Radius) • Palpate and secure the artery • Insert the needle, bevel up, at a 45° angle through the skin until blood pulsates into the syringe Procedure For Obtaining an Arterial Sample (Radius) • Withdraw the needle when sufficient sample is obtained • Apply firm pressure to the puncture site using a gauze pad Procedure For Obtaining an Arterial Sample (Radius) • Maintain pressure for a minimum of five minutes, longer if patient is on anticoagulant therapy • Expel any air bubbles from the syringe Procedure For Obtaining an Arterial Sample (Radius) • Mix the sample and label it • Place the sample in an icy slush (only if a delay in running the sample is expected) Procedure For Obtaining an Arterial Sample (Radius) • Dispose of any waste material in the appropriate container • Document the procedure Arterial Puncture http://www.youtube.com/watch?v=KbszTXeg71g The Kit Air bubbles • Gas equilibration between ambient air (pO2 ~ 150, pCO2~0) and arterial blood. • pO2 will begin to rise, pCO2 will fall • Effect is a function of duration of exposure and surface area of air bubble. • Effect is amplified by pneumatic tube transport. Transport • After specimen collected and air bubble removed, gently mix and invert syringe. • Because the wbcs are metabolically active, they will consume oxygen. • Plastic syringes are gas permeable. • Key: Minimize time from sample acquisition to analysis. Transport • Placing the AGB on ice may help minimize changes, depending on the type of syringe, pO2 and white blood cell count. • Its probably not as important if the specimen is delivered immediately. Pre-Analysis Errors • Presence of air in the sample – Recognized by presence of bubbles or froth, inconsistent PaCO2 – Allows diffusion of CO2 into the air, lowering the PaCO2 – As the CO2 diffuses, pH is raised Pre-Analysis Errors • Presence of air in the sample – In low PaO2 states, O2 diffuses into the blood, raising the PaO2 – In high PaO2 states, O2 diffuses out of the blood, lowering the PaO2 Pre-Analysis Errors • Venous admixture – Recognized by failure of syringe to fill by pulsations, inconsistent PaO2 – Higher PaCO2 than expected Pre-Analysis Errors • Venous admixture – Lower pH than expected – Lower PaO2 than expected (may be significantly lower) Pre-Analysis Errors • Metabolic effects – Caused by excessive time lag between sampling and analysis or improper storage of sample – Increase in PaCO2 as cellular metabolism continues – Decrease in pH secondary to increase in PaCO2 – Decrease in PaO2 as cells use up oxygen Pre-Analysis Errors • Excessive anticoagulant in syringe – Caused by allowing excessive heparin to remain in syringe (dead space only should have heparin) – Lowers PaCO2 – Raises pH Pre-Analysis Errors • Excessive anticoagulant in syringe – Raises low PaO2 – Lowers high PaO2 Capillary Sampling • Used as an alternative to arterial sampling in infants and small children. • Sample may approximate pH and PaCO2 values; PaO2 value is generally inaccurate Capillary Sampling • Indications2 – ABG analysis is indicated, but access is not possible – Assessment of initiation, administration, or change in therapy is indicated – Change in patient status is detected 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Indications2 – Monitoring severity or progression of disease is desirable – Noninvasive monitor readings are abnormal 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Contraindications2 – Capillary punctures should not be performed at or through: • The posterior curvature of the heel (Bone Damage) • Fingers of neonates (nerve damage) 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Contraindications2 – Capillary punctures should not be performed at or through: • Heel of an infant who has begun walking • Previous puncture sites 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Contraindications2 – Capillary punctures should not be performed at or through: • Inflamed, swollen, or edematous tissue • Localized areas of infection • Cyanotic or poorly perfused areas 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Contraindications2 – Contraindicated: • In patients less than twenty-four hours of age • When there is a need for direct analysis of oxygenation • When there is a need for direct analysis of arterial blood 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Contraindications2 – Relatively contraindicated: • When peripheral vasoconstriction is present • In the hypotensive patient • In polycythemia 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Precautions and/or complications2 – Contamination and infection of the patient – Inappropriate management through use of capillary rather than arterial samples 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Precautions and/or complications2 – Burns – Bone calcification – Bruising 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Precautions and/or complications2 – Pain – Hematoma – Nerve damage 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Precautions and/or complications2 – Scarring – Bleeding – Tibial artery laceration 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Assessment of need2 – Should be performed only when a documented need exists and arterial access is unavailable or contraindicated 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Capillary Sampling • Assessment of need2 – When initiation, administration, or change in therapy occurs – When noninvasive monitoring and assessment indicates a change in condition has occurred 2 Excerpt from the AARC Clinical Practice Guideline for Capillary Blood Gas Sampling for Neonatal and Pediatric Patients Procedure for Obtaining a Capillary Sample • Verify the order and the need for a capillary sample • Note any complications and notify the physician if any exist Procedure for Obtaining a Capillary Sample • Ensure that patient is in a steady state (no changes in oxygen status for at least twenty minutes) • Wash hands and don protective equipment Procedure for Obtaining a Capillary Sample • Select the site • Warm the site up to 42° C For ten minutes using a compress, heat lamp or commercial hot pack Procedure for Obtaining a Capillary Sample • Cleanse the skin with an antiseptic solution • Puncture the skin (less than 2.5 mm) with a lancet Procedure for Obtaining a Capillary Sample • Wipe away the first drop of blood and observe free flow (do not squeeze) • Fill the sample tube from the middle of the drop until it is full Procedure for Obtaining a Capillary Sample • Place the flea in the tube and seal the ends • Tape sterile cotton or a bandage over the puncture site Procedure for Obtaining a Capillary Sample • Mix the sample by moving the magnet back and forth along the tube • Place the sample in an icy slush Procedure for Obtaining a Capillary Sample • Dispose of waste materials properly • Document the procedure Capillary Tubes Neonatal Puncture Site Capillary Sampling Finger Stick Heel Stick Capillary Blood Gas Capillary Blood Gas • http://www.youtube.com/watch?v=7DPhP22KRbc&feature=r elated • http://www.youtube.com/watch?v=N5Id1kOQzv4 Cord Gas • http://www.youtube.com/watch?v=pTjhMylgje0&feature=rela ted Arterial Lines Indications • The arterial line with transducers is usually used to obtain accurate blood pressure readings every few seconds. This is especially important in monitoring the hemodynamic status of a critical patient. With an arterial line, the immediate effects of medication can be seen. Both systolic, diastolic and mean pressures can be monitored immediately. This is especially important when pressors such as Nipride, dopamine or Levophed are being used. • Another advantage of using an arterial line is that frequent blood samples can be obtained. A-line monitoring This system consists of • arterial line connected by saline filled non-compressible tubing to apressure transducer. This converts the pressure waveform into an electrical signal which is displayed on the bedside monitor • pressurized saline for flushing A-Line Monitoring • Sources of error • failure of any one of the components in system • transducer position – pressure displayed is pressure relative to position of transducer – in order to reflect blood pressure accurately transducer should be at level of heart. Over-reading will occur if transducer too low and underreading if transducer too high – transducer must be zeroed to atmospheric pressure • damping. Important to have appropriate amount of damping in the system. Inadequate damping will result in excessive resonance in the system and an overestimate of systolic pressure and an underestimate of diastolic pressure. The opposite occurs with overdamping. In both cases the mean arterial pressure is the most accurate. An underdamped trace is often characterized by a high initial spike in the waveform. A-line Monitoring A-line Complications • • • • • distal ischemia arterial thrombosis embolism. infection hemorrhage – disconnection – around line • accidental drug injection • damage to artery eg aneurysm Drawing Blood from an A-line • http://www.wonderhowto.com/how-to-draw-blood-fromarterial-line-343135/ A-line Placement • 1. Prepare a 500 ml bag of normal saline. Most institutions no longer use a heparinized bag. Spike the bag with the transducer administration set. Remove all air from the tubing and transducer set. Pay particular attention to the transducer part of the Tubing and the flush port. The smallest air bubble must be removed to insure transducer accuracy. The easiest way to do this is to pressurize the bag up to 300 mm Hg, then invert the bag, and fast flush it to remove all air from the bag. • 2. Pressurize the pressure bag to 300 mm Hg. The purpose of this is to provide backpressure to prevent blood from contaminating the transducer. • 3. With the transducer connected to the monitor, select arterial monitor, and perform a transducer check by fast flushing the line. As you do this, you should see a change in the waveform. This is called a square wave test. • http://www.youtube.com/watch?v=F1s08XoKdYY A-line Placement • 4. Zero the transducer and monitor by placing the transducer at the phlebostatic axis of the patient. Close the line off to patient and open to air. Press zero on the monitor. To monitor pressure, close the port off to an air and open to patient. • 5. At this point the patient catheter is ready to be connected. Connect the catheter and fast flush to clear the catheter of blood. • 6. You should now see an arterial waveform on the monitor with arterial blood pressure and mean should be on the monitor screen. Check for good waveform MORE ABG PRACTICE Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.39 • PaCO2 42 mmHg • HCO3 23 mEq/L • PaO2 97 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.39 • PaCO2 42 mmHg • HCO3 23 mEq/L • PaO2 97 mmHg • Normal acid-base balance with normal oxygenation Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.32 • PaCO2 49 mmHg • HCO3 26 mEq/L • PaO2 60mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.32 • PaCO2 49 mmHg • HCO3 26 mEq/L • PaO2 60mmHg • Uncompensated or acute respiratory acidemia with mild hypoxemia Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.31 • PaCO2 60 mmHg • HCO3 29 mEq/L • PaO2 58 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.31 • PaCO2 60 mmHg • HCO3 29 mEq/L • PaO2 58 mmHg • Partially compensated respiratory acidemia with moderate hypoxemia Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.50 • PaCO2 60 mmHg • HCO3 19 mEq/L • PaO2 60 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.50 • PaCO2 60 mmHg • HCO3 19 mEq/L • PaO2 60 mmHg • Lab error Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.35 • PaCO2 63 mmHg • HCO3 33 mEq/L • PaO2 60 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.35 • PaCO2 63 mmHg • HCO3 33 mEq/L • PaO2 60 mmHg • Compensated respiratory acidemia with mild hypoxemia Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.28 • PaCO2 28 mmHg • HCO3 8 mEq/L • PaO2 104 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.28 • PaCO2 28 mmHg • HCO3 8 mEq/L • PaO2 104 mmHg • Partially compensated metabolic acidemia with hyperoxygenation Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.36 • PaCO2 24 mmHg • HCO3 18 mEq/L • PaO2 109 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.36 • PaCO2 24 mmHg • HCO3 18 mEq/L • PaO2 109 mmHg • Fully compensated metabolic acidemia with hyperoxygenation Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.45 • PaCO2 48 mmHg • HCO3 33 mEq/L • PaO2 79 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.45 • PaCO2 48 mmHg • HCO3 33 mEq/L • PaO2 79 mmHg • Fully compensated metabolic alkalemia with mild hypoxemia Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.30 • PaCO2 30 mmHg • HCO3 35 mEq/L • PaO2 81 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.30 • PaCO2 30 mmHg • HCO3 35 mEq/L • PaO2 81 mmHg • Lab error Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.49 • PaCO2 47 mmHg • HCO3 35 mEq/L • PaO2 81 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.49 • PaCO2 47 mmHg • HCO3 35 mEq/L • PaO2 81 mmHg • Partially compensated metabolic alkalemia with normal oxygenation Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.24 • PaCO2 77 mmHg • HCO3 7 mEq/L • PaO2 28 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.24 • PaCO2 77 mmHg • HCO3 7 mEq/L • PaO2 28 mmHg • Combined acidemia with severe hypoxemia Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.36 • PaCO2 45 mmHg • HCO3 25 mEq/L • PaO2 108 mmHg Can You Interpret this Blood Gas? Blood Gas Drawn on Room Air • pH 7.36 • PaCO2 45 mmHg • Lab error – ( PaCO2 and PaO2 cannot • HCO3 25 mEq/L • PaO2 108 mmHg total more than 140 on room air)