Transcript Slide 1
Permit to Practice
The Corporate Licence
Ross Plecash, M.Eng., P.Eng
Director Corporate Affairs & Investigations
AGENDA
APEGGA
Professionalism
The Permit
The COO
The Responsible Member
The Professional Practice Management Plan
Professional Documents
Run time is approximately 35 minutes
APEGGA
Mission Statement
We serve the public interest
by regulating the practices of
engineering and geoscience in Alberta,
by providing leadership for our
professions, and,
by upholding our members in their
professional practices.
APEGGA (2)
The fundamental purpose of professional
legislation is to regulate professions in the
public interest.
Principles and Policies Governing Professional
Legislation in Alberta - 1990
In many firms, APEGGA members are the only
obligated professionals who must act as the
company’s conscience in matters that affect the
public interest
Self-Governance
Self-governance is a privilege delegated to a
profession only when the public interest is
served by doing so, and when the advantages
clearly outweigh the disadvantages.
Principles and Policies Governing Professional
Legislation in Alberta – 1990
Elected Council
Regulatory Committees staffed by volunteer
Professional Members
Government-appointed Public Members
Professionalism
Definition of a Profession:
A calling requiring specialized knowledge and often
long and intensive preparation including instruction
in skills and methods as well as in the scientific,
historical, or scholarly principles underlying such
skills and methods, maintaining by force or
organization or concerned opinion high standards
of achievement and conduct, and committing its
members to continued study and to a kind of work
which has for its prime purpose the rendering of a
public service.
Webster’s Third New International Dictionary, Unabridged.
Mirriam-Webster, Inc., 1993.
Professionalism (2)
Characteristics of a Profession
advanced / specialized knowledge
intensive study and preparation
continued professional development
good judgement
high standards
leadership
ethical conduct
duty to protect the public interest
Arch of Professionalism
Professionalism (4)
Public Interest
How do you know what is in the public interest?
This is not always clear-cut:
1. identify the stakeholders
2. seek a variety of views and work to genuinely
understand them
Professionalism (5)
Public Interest – many facets
Risk to safety (immediate, direct consequences)
Health effects (longer term or cumulative effects)
Environmental impacts and resource conservation
(sustainable development)
Socio-economic impacts
Public acceptability
Technical feasibility and operating reliability
Impact of related projects (e.g. pipelines or electricity
generation plants)
Future project opportunities enabled or blocked
Corporate profitability (shareholders)
Professionalism (6)
Aids to Ethical Decision Making
Internal Moral Compass – taught by family, school,
church
Ethics Theories – the philosophies
Code of Ethics – peer developed code
Case Studies – APEGGA Learning Module
Decision Making Methodology
Peers
APEGGA
Professionalism (7)
Links the right to practice with the
responsibility for practice.
Maintains an ethical and professional
approach to practice.
Continually upgrades practice standards to
protect the public.
Continuously improves to cope with
increasingly complex demands.
The Permit to Practice
Definitions
Permit to Practice (the licence)
Issued to all partnerships, incorporated companies or joint
ventures practicing the professions in Alberta, including
Individually Incorporated Practitioners (IIPs)
Not issued to Sole Proprietors
Permit holder (the company)
Chief Operating Officer (overall responsibility)
Responsible Member (responsibility for
professional practice)
The Permit to Practice (2)
The Rationale
Corporations are separate legal entities
from the professionals working within
them
Regulates group practice
Provides a single point of contact for both
regulatory and non-regulatory issues
The Permit to Practice (3)
History
1968 - consultants only
1981 - expanded to included operating companies
early 1990s - explore how to add value by focusing
on quality management and addressing concerns
of Individually Incorporated Practitioners (IIPs)
The Permit to Practice (4)
Recent Changes
Mandatory Permit stamp no longer required
Change in fees structure
increased to 150% of Professional Member dues
first year’s dues included in registration fees
reduction for IIPs
Pro-active Practice Reviews
Professional Practice Guideline
Professional Practice Management Plan (PPMP)
Mandatory seminars
The Chief Operating Officer
Assumes overall responsibility and must:
sign permit application
jointly with RMs, maintain organization in which the
practice of the professions can be conducted in
accordance with the Act & Regulations
ensure all practising Engineers, Geologists &
Geophysicists are licensed
ensure titles are assigned appropriately
ensure company standards at least meet the
professions’ standards
ensure permit number and member stamps are on
all professional documents
The Chief Operating Officer (2)
And must:
surrender stamp and certificate if there are no
qualified RMs
pay dues & submit Annual Report
submit changes to COO and RMs when available or
annually as per Annual Report
assure at least one RM for each profession
ensure the company has a PPMP and that it is being
followed
ensure a RM or COO attends Permit to Practice
Seminar at least once every 5 years
The Chief Operating Officer (3)
And should foster professionalism by:
establishing policies that align organizational needs with
professional responsibilities;
eliminating policies that bring professional
responsibilities into conflict with organizational needs;
encouraging professionals to volunteer with APEGGA or
other professional groups;
supporting Continuing Professional Development;
displaying, jointly with RMs, a positive attitude to
regulation and to the role that APEGGA plays;
providing support for RMs’ professional
recommendations (see RMs).
The Responsible Member
Assumes responsibility for a specific, assigned area of
practice within the company and must:
jointly with the COO, maintain organization in which the
practice of the professions can be conducted in
accordance with the Act & Regulations
ensure all practising Engineers, Geologists &
Geophysicists are licensed
ensure titles are assigned appropriately
ensure company standards at least meet the
professions’ standards
ensure permit number and member stamps are on
all professional documents
The Responsible Member (2)
And must:
ensure quality is managed by implementing the
company’s Professional Practice Management Plan.
He/she will:
provide responsible direction
personal supervision
but need not necessarily:
take personal responsibility for the technical
content
advise COO and APEGGA when responsibility is
relinquished
The Responsible Member (3)
The RM should foster professionalism by:
recommending that the company has an evaluation
system and development plan for all professionals
(including contract employees)
encouraging the employment of MIT’s
Supporting Continuing Professional Development
recommending that the company uses
qualifications based selection for awarding
professional services contracts
recommending a peer review of the company’s
professional practices
The Responsible Member (4)
The RM should model professionalism in the
workplace by supporting:
Council elections
APEGGA surveys & ballots
Employee Professional Development
Summit Award nominations
Volunteering for APEGGA
A positive attitude toward regulation and the role
that APEGGA plays
The Responsible Member (5)
If you don’t think you are in a
position to carry out these
responsibilities, then you
should review your role as a
Responsible Member.
Professional Organization
How many Responsible Members
are enough?
See the Practice Standard for
Authenticating Professional
Documents - Appendix A-3
Quality Management
Involves:
Providing proper conditions
Maintaining the appropriate level of
competence
Assuring effective management of technical
quality
Ensuring effective project management
Maintaining appropriate records.
Professional Practice
Management Plan
Required by the EGGP Act since April 2002
Guideline approved by Council in September
2003
1.
Management, Organization and
Responsibilities
2.
Ethical Standards
3.
Professional and Technical Resources
4.
Quality Control
5.
Professional Documents and Records
Professional Practice
Management Plan (2)
Professional Practice Management Plan
Management, Organization and Responsibilities
Statement of policy on Professional Practice
Management
Identification of COO and Responsible
Members and their authorities
Organizational structure
Lines of Technical Responsibility
Professional Practice
Management Plan (3)
Professional Practice Management Plan
Ethical Standards
Acknowledges the Permit Holder’s obligation to
provide a working environment that ensures:
Standards of professional conduct
Standards of technical competence
Support of professional employees in
discharging their legal and ethical duties under
the EGGP Act
Professional Practice
Management Plan (4)
Professional Practice Management Plan
Professional and Technical Resources
Policies on hiring
Inventory of expertise/competencies
Methods of assessing and reviewing employees’
skills
Reference materials
Standard company forms
Information Technology policy
Appropriate computer hardware/software
Necessary lab/testing equipment
Professional Practice
Management Plan (5)
Professional Practice Management Plan
Quality Control - Professional Business
Practices
Corporate Strategy
Confidential material
Dispute / conflict resolution
Advertising and promotion
Contract negotiation, including sample contracts
Coordination and teamwork
Loss Control and Risk Management
Formal QA Plans (e.g. ISO 9001)
Professional Practice
Management Plan (5)
Professional Practice Management Plan
Quality Control – Technical Work
Due Diligence requirements
Training
Assumptions
Independent checks
Professional Practice
Management Plan (5)
Professional Practice Management Plan
Quality Control – Project Management
Cost Estimates & Expenditures
Project Management Systems
Changes / Progress Payments / Reviews
Field Reviews
Professional Practice
Management Plan (6)
Professional Practice Management Plan
Professional Documents and Records
Identifying which documents need control
Preparing, reviewing, issuing, using, and
revising documents and records
Responsibility for authentication
Managing and maintaining documents and
records
Ensuring compliance with applicable codes and
standards
Records of communication
Professional Documents
What constitutes a Professional Document?
Practice Standard for Authenticating
Professional Documents v2.0
A professional document has two main
characteristics:
1. It
2. It
contains technical information
is complete for its intended
purpose
Professional Documents (2)
Two marks are required for proper authentication
APEGGA Member’s professional stamp
Attests to the member’s involvement in the
creation of the document:
Creation
Supervision
Thorough review
APEGGA Permit Number
Attests to the fact the work has gone through the
QC process specified in the PPMP
Liability and Responsibility
The Court’s role is to determine liability
A properly written PPMP may help
demonstrate due diligence in a civil law suit
APEGGA’s Role – Professional Responsibility
Recommended Reading
For further details please refer to the
Guideline for Professional Practice
Management Plans
and the
Practice Standard for Authenticating
Professional Documents
Available as free downloads from
APEGGA’s website
Next Steps
As a minimum:
Ensure your company is using reserved
titles appropriately
Ensure your employees who are qualified
are licensed
Ensure your company is following the
professional standards developed by
APEGGA
Next Steps (2)
Ensure your Professional Practice
Management Plan:
Is in place
Is being followed
Addresses communications and record keeping
Ensure you are authenticating all of your
professional documents
Next Steps (3)
Complete the Permit to Practice
Seminar Declaration, available on the
website, and submit it to APEGGA for
credit
While completing this electronic
version of the seminar satisfies your
statutory requirement for attendance,
you are encouraged to attend a live
seminar should your schedule permit.
Final Thoughts
As a COO and / or a Responsible
Member, you are obligated to assist
APEGGA in ensuring the practices of
Engineering, Geology and Geophysics
in your firm are conducted in
accordance with the Act and
Regulations
Final Thoughts
As a COO and / or a Responsible
member, APEGGA is also asking you
to take on a greater role in the
promotion of professionalism within
your firms.
Final Thoughts
Just as the APEGGA Council, Boards
and Committees are an integral part of
how the professions are managed, so
too are the COOs and Responsible
Members.
Final Thoughts
As Partners in the Professions, you play a key
role in enabling APEGGA to regulate enhance,
and provide leadership in the professions.
Questions?
Please direct all your questions regarding the
Permit to Practice, your Professional
Responsibilities, and this seminar to
Ross Plecash, M.Eng., P.Eng.
Director Corporate Affairs & Investigations
APEGGA
(780) 426-3990
(800) 661-7020
rplecash @ apegga.org
download declaration … here