Transcript Diapositiva 1

ENTERPRISE PRODUCTS
GBICs, SFPs & Media Converters
KEY MARKETS
Who Buys Telsey Media Converters?
• Media converters market around 300 M$
• Switching market more then 10 B$
• Enterprise
• Media converters
• Switches for the access and agreggation
• Small and medium LANs do not need
heavy modular switches
• etc.
• Network service providers
•
•
•
•
•
Media converters
Access switches
Residential gateways (CPEs)
STBs
etc.
OSI Seven Layer Model

Layer 7 – Application (where Email, FTP, Telnet, etc. access the network) (data)

Layer 6 – Presentation (Encoding of mpeg / jpeg / ascii / text) (data)

Layer 5 – Session (allows applications to establish & end dialog) (data)

Layer 4 – Transport (TCP /UDP – error corrects, Max Tx Unit, segments)

Layer 3 – Network Layer (IP /IPX addresses the data for WAN routing) (packets)

Layer 2 – Data Link Layer (puts raw bits into frames, MAC Address) (frames)
(separate network into VLANs)

Layer 1 – Physical Layer (Cable type) (bits)
Layer 1 – The Cable Type
• Thick Ethernet
(Yellow Co-ax - obsolete)
• Thin Ethernet
(Black Co-ax - obsolete)
• Unshielded Twisted Pair(Cat 5 / Cat 5e / Cat 6)
• Fibre
(Multi Mode / Single Mode)
Layer 1 Types of Copper Cable
Spectral
Bandwidth
Channel
Length
Cat 1
LAN Applications
Voice Cabling
4Mb Token Ring (4 x UTP’s)
Cat 2
4MHz
Cat 3
16MHz
100m
10Mb Ethernet, 4Mb Token Ring
Cat 4
20MHz
100m
10Mb Ethernet, 16Mb Token Ring
Cat 5
100MHz
100m
1000Mb Ethernet
Cat 5e *
100MHz
100m
1000Mb Ethernet
100m
1000Mb Ethernet
Cat 6 **
Cat 6e **
250MHz
100m
1000Mb Ethernet
Cat 7
600MHz
100m
Available rarely by some vendors
* e stands for enhanced – has better crosstalk
** Cat 6 is expensive, large cross section & large bend radius
Layer 1 - Why Fibre Optic Cable?
• Distance
– Spans far greater distance than copper
• Security
– Fibre eliminates data signals radiating from a cable
– Difficult to ‘tap’ and does not emit signals
• Immunity from Electro-Magnetic Interference (EMI)
– Fibre eliminates electrical energy corrupting data on a cable
– E.g. lightning, Welding, heavy electrical motors, power
generation
• 10Gb cabling
Construction of Glass Fibre
High Density Glass Core
Lower Density Glass Cladding
1 micron = 1 millionth of a metre = 1 µm
125 microns = thick human hair
125 µm
Construction of Glass Fibre
Light Source
Light reflects off of high density low density interface
Limitation of Multi Mode Fibre
Sharp pulse of light in – different path lengths through fibre – slightly blurred pulse out
Longer the fibre – more the blur
Blur limits frequency of light, therefore limits speed of data
Each bounce reduces power of signal, thus reducing max distance of fibre
Types of Fibre
Multi-mode fibre
•
•
•
•
•
•
62.5/125 Multi Mode fibre – first available fibre type
50/125 Multi mode fibre – available later - better
Multi Mode = Multi bounce
2km maximum distance at 100Mbps
500m maximum distance at 1000Mbps (50/125)
Multi Mode allows ‘tighter’ bends
125
µm
62.5
µm
Single-mode fibre





9/125 or 10/125µm
Single mode ≈ Single bounce
Around 100 km maximum distance
Large minimum bend radius
More expensive optics at each end
125
µm
9 µm
Fibre Links mainly have
one fibre for Tx
one Fibre for RX
Bi-Directional or “Single Fibre” Drivers
Adding a “prism” at each end can direct Rx and Tx light
down the same fibre
With good fibre joints all OK
With bad fibre joints, reflection goes back in Rx
Ethernet Copper Distance Limitations
Cat 5 UTP Copper
10BaseT
100BaseT
1000BaseT
100m
100m
100m
Multi Mode Fibre Distances
Wavelength
Distance
using 62.5/125
Distance
using 50/125
10FL MM
850nm
2Km
2Km
100SX MM
850nm
300m
300m
100FX MM
1310nm
2Km
2Km
1000SX
850nm
220m
550m
1000LX SM
(10Km) + Mode
conditioning
patchcord
1310nm
550m
550m
Advanced Multi Mode Fibre Distances
Wavelength
Distance
using 62.5/125
(160MHz /Km)
Distance
using 50/125
(500MHz/Km)
Distance
using 62.5/125
(200MHz/Km)
Distance
using 50/125
(2000MHz/Km)
10FL MM
850nm
2Km
2Km
100SX MM
850nm
300m
300m
100FX MM
1310nm
2Km
2Km
1000SX
850nm
220m
550m
1000LX SM
(10Km) + Mode
conditioning
patchcord
1310nm
550m
550m
10G SR MM
850nm
26m
82m
33m
300m
XPLRM
1300nm
300m
300m
300m
300m
Single Mode Fibre Distance Limitations
Optical
Distance using
Standard
Wavelength
9/125
1000LX SM (10Km)
1310nm
10Km
1000LX SM (20Km)
1310nm
20Km
1000LX SM (50Km)
1550nm
50Km
1000LX SM (70Km)
1550nm
70Km
XSF
1310nm
10Km
XSF
1550nm
40Km
MMF and 550m/220m limit
• How to increase the distance on MFF?
1000SX
Wavelength
Distance
using 62.5/125
(160MHz /Km)
Distance
using 50/125
(500MHz/Km)
850nm
220m
550m
MMF
SMF
Mode Conditioning Patchcord
Notes - Multi Mode Fibre
• Match both ends of your media converters, SX wont talk to FX etc,
match distance too.
• Make sure Fibre patch cords match the rest of the fibre in the run
• Only recommend installing 62.5/125 if the rest of the site is 62.5/125
(if all patch cords match it avoids mistakes)
• If specifying New Multi Mode Fibre Installation use 50/125 it
performs better than 62.5/125 for the same cost
10BaseX Ethernet Connectors
10Base5
Thicknet cable
AUI connector
500m max distance
10BaseT
Cat 3, 4, 5 or 5e UTP cable
RJ-45 connector
100m max distance
10Base2
Thinnet cable
BNC connector
185m max distance
10Base FL 850nm usually
ST type connector
2000m max distance
100BaseX Fast Ethernet Connectors
Typically yellow patch cord means single mode
• 100BaseT on RJ45
•
100BaseFX on SC
• 100BaseFX on MTRJ
MTRJ is High Density (RJ45 size)
Available with & without alignment pins
• 100BaseFX on VF45
Made by 3M, Low cost to terminate
Cover to protect from dust / protect eyes
1000BaseX (Gigabit) Ethernet Connectors
• 1000BaseT on RJ45
• 1000BaseSX on SC
• 1000BaseLX on SC
• 1000BaseSX on LC
• 1000BaseLX on LC
• LC is High density (RJ45 size)
10GBaseX (10 Gig) Ethernet Connectors
• 10GBaseCX4
•
•
•
•
10GBaseSR on LC
10GBaseLR on LC
10GBaseER on LC
10GBaseZR on LC
Ethernet Standards Family
(Speed defined at Layer 2 of OSI Seven Layer Model)
•
10Mb - Ethernet - Original Ethernet speed, still commonplace IEEE
802.3
–
–
–
–
•
100Mb - Fast Ethernet - 10/100 Current workstation standard IEEE
802.3u
–
–
–
•
100BaseSX – 100Mb over Multi Mode fibre using 850nm drivers
100BaseTX – 100Mb over two unshielded twisted pairs
100BaseFX – 100Mb over Multi Mode fibre using 1310nm drivers
1Gb - Gigabit Ethernet – Server standard – Network Backbone
standard
–
–
–
•
10Base5 – Thick Ethernet (Coax) - obsolete
10Base2 – Thin Ethernet (Coax) - obsolete
10BaseFL – 10Mb over MM Fibre using 850nm drivers
10BaseT – 10Mb over two unshielded twisted pairs
1000BaseT – 1000Mb over four unshielded twisted pair IEEE 802.3z
1000BaseSX – 1000Mb over Multi Mode fibre
1000BaseLX – 1000Mb over Single Mode fibre
10Gb - 10 Gig Ethernet – IEEE P802.3ae – Large Network Backbone
standard
–
–
–
–
10GBaseSR
10GBaseLR
10GBaseER
10GBaseZR
– 10 Gig over MM using 850nm (300 meters)
– 10 Gig over SM using 1310nm (10Km)
– 10 Gig over SM using 1550nm (40Km)
– 10 Gig over SM using 1550nm (80Km)
Media Converter Link Failure
• Link Failure feature – Unmanaged Media converter passes on
management info (fibre failure) the only way it can – At Layer 1
• A Link Failure Media Converter will stop transmitting light if it
does not receive a live Ethernet copper port.
• A Link Failure Media Converter will drop its 10/100 port if it
does not receive signal on fibre.
Missing Link – How is it useful?
Without Missing Link
Rest of
Network
Managed Switch
Media
Converter
Media
Converter
Switch
Set the Managed switch port to fixed 100Mb FD
Network Management system reports link OK
With Missing Link
Rest of Managed Switch
Network
Media
Converter
Media
Converter
Switch
Set the Managed switch port to fixed 100Mb FD
Network Management system reports link down
Pluggable Optical Modules
GBICs & SFPs
www.telsey.com – [email protected]
Telsey Pluggable Optical Modules
GBICs & SFPs
Telsey
Pluggable Optical Modules
GBIC
GB101 550m
GB102 10km
GB103 40km
GB104 80km
GB105 120km
SFP
Gigabit
Fast
Gigabit
Fast
Ethernet
Ethernet
Ethernet
Ethernet
GB111 15km
GB112 40km
GB113 80km
SP101 550m
SP102 10km
SP103 40km
SP104 80km
SP105 120km
SP111 15km
SP112 40km
SP113 80km
Telsey Pluggable Optical Modules
GBICs & SFPs
1.25G GBIC
Part Number
GB101
GB102
GB103
GB104
GB105
Description
GBIC 1000SX SC 850nm 550m max.1,25Gbps, Hot Swappable
GBIC 1000LX SC 1310nm 10km max.1,25Gbps, Hot Swappable
GBIC 1000LX SC 1310nm 40km max.1,25Gbps, Hot Swappable
GBIC 1000ZX SC 1550nm 80km max.1,25Gbps , Hot Swappable
GBIC 1000ZX SC 1550nm 120km max.1,25Gbps, Hot Swappable
1.25G SFP
Part Number
SP101
SP102
SP103
SP104
SP105
Description
SFP 1000SX LC 850nm 550m max.1,25Gbps, Hot Swappable
SFP 1000LX LC 1310nm 10km max.1,25Gbps, Hot Swappable
SFP 1000LX LC 1310nm 40km max.1,25Gbps, Hot Swappable
SFP 1000ZX LC 1550nm 120km max.1,25Gbps, Hot Swappable
Description
GBIC 100FX SC 1310nm 15km max.155Mbps, Hot Swappable
GBIC 100FX SC 1310nm 40km max.155Mbps, Hot Swappable
- Full range of distances from
220/550 m on MMF up to
120 km on SMF
GBIC 100FX SC 1550nm 80km max.155Mbps, Hot Swappable
155M SFP
Part Number
SP111
SP112
SP113
- Fibber modules for MMF and SMF
SFP 1000ZX LC 1550nm 80km max.1,25Gbps, Hot Swappable
155M GBIC
Part Number
GB111
GB112
GB113
- Complete offer of GBICs & SFPs
Description
SFP 100FX SC 1310nm 15km max.155Mbps, Hot Swappable
SFP 100FX SC 1310nm 40km max.155Mbps, Hot Swappable
SFP 100FX SC 1550nm 80km max.155Mbps, Hot Swappable
- Compatible with Telsey switches
but also with other vendors
Media Converters
Dual-Fiber Media Converters
MF1xx= FastEthernet MCs
MG1xx= GigabitEthernet MCs
Single-Fiber Media Converters
MS1xx= FastEthernet MCs
MS2xx= GigabitEthernet MCs
www.telsey.com – [email protected]
Media Converters
•
Media Conversion allows the connection of different
Ethernet Layer 1 cable types on the network
•
Cost-effective way of adding fibre to an existing network
•
Telsey Media Converters converts media and speed
Example of Media Conversion
Switch
UTP
Media
Converter
Switch
Up to 100m
Up to 100m
Fibre link
Up to 120km
Switch
UTP
Media
Converter
Fibre link
UTP
Media
Converter
Media Converters
• Cost effective way to bridge
the distance
• Variety on choices:
•
•
•
•
•
10/100 Mbps
1000 Mbps
Dual fibber or single fiber
Multi Mode or Single Mode fiber
Distances up to 120 km
• Applicable for:
• Operators
• Railways
• Utilities like gas, water and
electricity suppliers
• Government usage etc.
Telsey Media Converter Selector
Telsey
Media Converters
Dual-Fiber
MG100 series
Single-Fiber
Gigabit
Fast
Gigabit
Fast
Ethernet
Ethernet
Ethernet
Ethernet
MF100 series
MS200 series
MS100 series
Telsey Media Converters Portfolio
Part Number Description
Dual-fiber Media Converters
MF101
MF102
MF103
MF104
MF105
MF108
MG101
MG102
MG103
MG104
MG105
MG106
MG107
MG108
Media Converter 10/100TX to 100FX (SC MM 1310nm 2km) , int P.S.
Media Converter 10/100TX to 100FX (SC SM 1310nm 25Km), int P.S.
Media Converter 10/100TX to 100FX (SC SM 1310nm 40Km), int P.S.
Media Converter 10/100TX to 100FX (SC SM 1310nm 60Km), int P.S.
- 10/100TX to 100FX
- 10/100/100TX to 1000S/LX
- Dual and Single Fiber
- Up to 120km
Media Converter 10/100TX to 100FX (SC SM 1310nm 120Km), int P.S.
Media Converter 100FX (SC MM 1310nm 2km) to 100FX (SC SM 1310nm 25km -or- MM 1310nnm 2km), int. P.S.
Media Converter 10/100/1000T to 1000SX (SC MM 850nm 0,5km), int P.S.
Media Converter 10/100/1000T to 1000LX (SC SM 1310nm 10km), int P.S.
Media Converter 10/100/1000T to 1000LX (SC-SM 1310nm 25km), int P.S.
Media Converter 10/100/1000T to 1000LX (SC-SM 1310nm 40km), int P.S.
Media Converter 10/100/1000T to 1000LX (SC-SM 1550nm 60km), int P.S.
Media Converter 10/100/1000T to 1000LX (SC SM 1550nm 80km) , int P.S.
Media Converter 10/100/1000T to 1000LX (SC SM 1550nm 120km), int P.S.
Media Converter 1000SX (SC MM 1310nm 2km) to 1000SX (SC SM 1310nm 10km), int P.S.
Single-fiber Media Converters
MS101
MS102
MS103
MS104
MS105
MS106
MS107
MS108
MS201
MS202
MS203
MS204
Single-fiber Media Converter 10/100TX to 100FX (SC SM TX1310nm/RX1550nm 25km), int P.S.
Single-fiber Media Converter 10/100TX to 100FX (SC SM TX1550nm/RX1310nm 25km), int P.S.
Single-fiber Media Converter 10/100TX to 100FX (SC SM TX1550nm/RX1310nm 40km), int P.S.
- 16 slots
Single-fiber Media Converter 10/100TX to 100FX (SC SM TX1310nm/RX1550nm 60km), int P.S.
Single-fiber Media Converter 10/100TX to 100FX (SC SM TX1550nm/RX1310nm 60km), int P.S.
Single-fiber Media Converter 10/100TX to 100FX (SC SM TX1310nm/RX1550nm 80km), int P.S.
Single-fiber Media Converter 10/100TX to 100FX (SC SM TX1550nm/RX1310nm 80km), int P.S.
Single-fiber Media Converter 10/100/1000TX to 1000LX (SC SM TX1310nm/RX1550nm 10km), int P.S.
Single-fiber Media Converter 10/100/1000TX to 1000LX (SC SM TX1550nm/RX1310nm 10km), int P.S.
Single-fiber Media Converter 10/100/1000TX to 1000LX (SC SM TX1310nm/RX1550nm 20km), int P.S.
Single-fiber Media Converter 10/100/1000TX to 1000LX (SC SM TX1550nm/RX1310nm 20km), int P.S.
Media Converter Chassis
RM16
- 19” Converter chasses
Single-fiber Media Converter 10/100TX to 100FX (SC SM TX1310nm/RX1550nm 40km), int P.S.
Media Converter Centre 16 slots chassis 19” - 2U with redundant Power Supply (for MFs, MGs & MSs)
-Redundant Power Suply
Included !!!
Dual-Fiber Media Converters
Switch
UTP
Media
Converter
Switch
Up to 100m
Up to 100m
Dual-Fiber link
Up to 120km
UTP
Media
Converter
MF100 series
Dual-Fiber, FastEthernet Media Converters
•
•
•
•
•
•
•
•
•
10/100BaseTX to 100BaseFX Media Converters
Dual-Fiber optical ports
Unmanaged Dual-port FastEthernet switch
rather than a traditional L1 converter
Fully compliant with IEEE:
802.3 10Base-TX,
802.3u 100Base-TX and FX Standard
Store and Forward Switching Method
100BaseTX port at 10/100 Mbps Auto-sensing and
Full/Half Duplex Auto-negotiation
Auto-Cross over for MDI/MDIX in TP port
8K MAC addresses
Distances: up to 2Km with Multi-Mode fiber
up to 120Km with Single-Mode fiber
•
•
•
•
Compact size metal case
Internal power supply (The MF100 series could be plugged into RM16 Chassis)
Low dissipation
Complies with CE & FCC emission standard
•
•
Cost-effective & Highly reliable device
Compatible with any other products featuring a 100BaseFX interface
Application:
•
Upgrade or extend existing 100BaseT or 10BaseT network into fiber network easily
•
Installation and operation of the MF100 Series is simple and straightforward
Dual-fiber, FastEthernet
Media Converters
10/100TX (RJ45) to 100FX (SC)
• MF101
MultiMode Fiber, 1310nm, Up to 2km
• MF102
SingleMode Fiber, 1310nm, Up to 25km
• MF103
SingleMode Fiber, 1310nm, Up to 40km
• MF104
SingleMode Fiber, 1310nm, Up to 60km
• MF105
SingleMode Fiber, 1310nm, Up to 120km
100FX (SC) to 100FX (SC)
• MF108
MultiMode Fiber, 1310nm, Up to 2km
SingleMode Fiber, 1310nm, Up to 25km
MG100 series
Dual-Fiber, GigabitEthernet Media Converters
•
•
•
•
•
•
•
•
•
10/100/1000BaseTX to 1000BaseSX/FX Media Converters
Dual-Fiber optical ports
Unmanaged Dual-port GigabitEthernet switch
rather than a traditional L1 converter
Fully compliant with IEEE:
802.3 10Base-TX,
802.3u 100Base-TX,
802.3ab 1000Base-TX and FX Standard
Store and Forward Switching Method
1000BaseTX port at 10/100/1000 Mbps Auto-sensing and
Full/Half Duplex Auto-negotiation
Auto-Cross over for MDI/MDIX in TP port
4K MAC addresses
Distances: up to 550m, Muli-Mode fiber, 850nm
up to 2km with Multi-Mode fiber, 1310nm
up to 120Km with Single-Mode fiber, 1550nm
•
•
•
•
Compact size metal case
Internal power supply (The MG100 series could be plugged into RM16 Chassis)
Low dissipation
Complies with CE & FCC emission standard
•
•
Cost-effective & Highly reliable device
Compatible with any other products featuring a 100BaseFX interface
Application:
•
Upgrade or extend existing 1000BaseT, 100BaseT or 10BaseT network
into fiber network easily
•
Installation and operation of the MG100 Series is simple and straightforward
Dual-fiber, GigabitEthernet
Media Converters
10/100/1000TX (RJ45) to 1000SX (SC)
• MG101
MultiMode Fiber, 850nm, Up to 550m
10/100/1000TX (RJ45) to 1000LX (SC)
• MG102
SingleMode Fiber, 1310nm, Up to 10km
• MG103
SingleMode Fiber, 1310nm, Up to 25km
• MG104
SingleMode Fiber, 1310nm, Up to 40km
• MG105
SingleMode Fiber, 1550nm, Up to 60km
• MG106
SingleMode Fiber, 1550nm, Up to 80km
• MG107
SingleMode Fiber, 1550nm, Up to 120km
100FX (SC) to 100FX (SC)
• MG108
MultiMode Fiber, 1310nm, Up to 2km
SingleMode Fiber, 1310nm, Up to 10km
Single-Fiber Bi-directional
Media Converters
Switch
UTP
Media
Converter
Switch
Up to 100m
Up to 100m
Single-Fiber link
Up to 120km
UTP
Media
Converter
MS100 series
Single-Fiber, FastEthernet Media Converters
•
•
•
•
•
•
10/100BaseTX to 100BaseFX 2-wavelength WDM Media Converters
Single-Fiber optical ports with Single-Fiber SC connector
Unmanaged Dual-port FastEthernet switch
rather than a traditional L1 converter
Fully compliant with IEEE:
802.3 10Base-TX,
802.3u 100Base-TX and FX Standard
Store and Forward Switching Method
100BaseTX port at 10/100 Mbps Auto-sensing and
Full/Half Duplex Auto-negotiation
Auto-Cross over for MDI/MDIX in TP port
1K MAC addresses
Distances: 25km to 80Km on Single-Mode fiber
•
•
•
•
Compact size metal case
Internal power supply (The MS100 series could be plugged into RM16 Chassis)
Low dissipation
Complies with CE & FCC emission standard
•
•
Cost-effective & Highly reliable device
Compatible with any other products featuring a 100BaseFX interface
•
•
•
Application:
•
Upgrade or extend existing 100BaseT or 10BaseT network into fiber network easily
•
Installation and operation of the MS100 Series is simple and straightforward
Single-Fiber, FastEthernet, Bi-directional
Media Converters
10/100TX (RJ45) to 100FX (SC)
25km pair
• MS101
SingleMode Fiber, TX1310nm, RX1550nm, Up to 25km
• MS102
SingleMode Fiber, TX1550nm, RX1310nm, Up to 25km
40km pair
• MS103
SingleMode Fiber, TX1310nm, RX1550nm, Up to 40km
• MS104
SingleMode Fiber, TX1550nm, RX1310nm, Up to 40km
60km pair
• MS105
SingleMode Fiber, TX1310nm, RX1550nm, Up to 60km
• MS106
SingleMode Fiber, TX1550nm, RX1310nm, Up to 60km
80km pair
• MS107
SingleMode Fiber, TX1310nm, RX1550nm, Up to 80km
• MS108
SingleMode Fiber, TX1550nm, RX1310nm, Up to 80km
MS200 series
Single-Fiber, FastEthernet Media Converters
•
•
•
•
•
•
10/100/1000BaseTX to 1000BaseSX/FX Media Converters
Dual-Fiber optical ports
Unmanaged Dual-port GigabitEthernet switch
rather than a traditional L1 converter
Fully compliant with IEEE:
802.3 10Base-TX,
802.3u 100Base-TX,
802.3ab 1000Base-TX and FX Standard
Store and Forward Switching Method
1000BaseTX port at 10/100/1000 Mbps Auto-sensing and
Full/Half Duplex Auto-negotiation
Auto-Cross over for MDI/MDIX in TP port
1K MAC addresses
Distances: up to 20km
•
•
•
•
Compact size metal case
Internal power supply (The MS200 series could be plugged into RM16 Chassis)
Low dissipation
Complies with CE & FCC emission standard
•
•
Cost-effective & Highly reliable device
Compatible with any other products featuring a 100BaseFX interface
•
•
•
Application:
•
Upgrade or extend existing 1000BaseT, 100BaseT or 10BaseT network
into fiber network easily
•
Installation and operation of the MS200 Series is simple and straightforward
Single-Fiber, GigabitEthernet, Bi-directional
Media Converters
10/100/1000TX (RJ45) to 1000SX (SC)
10km pair
MS201
SingleMode Fiber, TX1310nm, RX1550nm, Up to 10km
MS202
SingleMode Fiber, TX1550nm, RX1310nm, Up to 10km
20km pair
MS203
SingleMode Fiber, TX1310nm, RX1550nm, Up to 20km
MS204
SingleMode Fiber, TX1550nm, RX1310nm, Up to 20km
RM16
•
•
•
•
Media Converter Centre for MFs, MGs & MSs
16 slots chassis
19” - 2U with
Redundant Power Supply Included
Application:
•
To centralize in rack up to 16 MC blades with redundant power supply
•
Installation and operation of the RM16 Series is simple and straightforward
Example of
media conversion deployment
Q&A
Thank You for Your attention!