Transcript TUBE FORGED SALAP (KALITALA) HOWRAH

1
MANUFACTURARS & SUPPLIERS OF WIDE RANGE
OF
FORGED PIPE FITTINGS & FLANGES
IS
A
VASTLY
EXPERIENCED
ORGANIZATION
MANUFACTURING BUTT-WELD PIPE FITTINGS WAS ESTABLISHED IN
1994 AT
SALAP (100 METERS AWAY FROM NH6), HOWRAH, WEST BENGAL. IT IS
REGISTERED WITH “SSI” & “NSIC” UNIT UNDER GOVERNMENT OF INDIA AS WELL
AS WITH “MECON LTD.”, “DAUSTUR CO.”, “SAIL (DSP)”. “SAIL (RSP-KC10
PROJECT)”, “TATA STEEL LIMITED (KPO)” “IBR (W.B.)”. EARLIER TUBE
FORGED STARTED MANUFACTURING WITH A MANUAL OPERATED BALL PRESS
MACHINE BUT GRADUALLY IT DEVELOPED ITS MACHINERY & TECHNOLOGY & ALSO
INTRODUCED EXTRUDER BENDING MACHINE & TEE FORMING MACHINE ETC.
WHICH ARE REQUIRED FOR PRODUCING QUALITY BUTT-WELD PIPE FITTINGS AND
FORGED FITTINGS OF CARBON STEEL & STAINLESS STEEL OF VARIOUS TYPES &
SIZES CONFORMING TO NATIONAL / INTERNATIONAL SPECIFICATION TO
MEET THE REQUIREMENT OF ITS VALUED & REPUTED CUSTOMERS LIKE “SAIL”,
“TATA STEEL LTD.”, “BHUSHAN POWER & STEEL LTD.”, “VOLTAS LTD.”,
“JUSCO LTD.”, “NICCO CORPORATION LTD.”, “MCNALLY BHARAT
ENGG. CO LTD.”, “BLUE STAR LTD.”, “SHRIRAM EPC LTD.” ETC.
2
LIST OF MECHINERY
TUBE FORGED one of the leading organization who manufactured Butt-weld pipe fittings, Forged
fittings as per NATIONAL / INTERNATIONAL specification,
TUBE FORGED having the following MANUFACTURING FACILITIES at our factory premises.
* MANDREL PROCESS / EXTRUDER ELBOW BENDING MACHINE
* TEE FORMING MACHINE
* FURNACE (OIL FIRED)
* NORMALISING FURNACE WITH RECORDER (OIL FIRED)
* HYDRAULIC PRESS
* PIPE/BILLET CUTTING MACHINE
* LATH MACHINE
* DRILL MACHINE
* ELECTRIC WINCH
* PEDESTAL GRINDER
* FLEXIBLE GRINDER
* STRAIGHT GRINDER
* ANGLE GRINDER
* WELDING GENERATOR
* GAS CUTTING SET
* CHAIN PULLEY BLOCK
* TOOL GRINDER
* GENERATOR SETS
* OVERHEAD CRAIN LINE
ETC TO FULFIL CLIENTS REQUIREMENTS AT LEAST TIME
3
PRODUCT RANGE (IBR & NON-IBR)
ITEM
SIZE
MATERIAL
15 NB to 600 NB
CARBON STEEL SEAMLESS &
ERW
25 NB to 600 NB
STAINLESS STEEL
15 NB to 50 NB
FORGED, CARBON STEEL,
STAINLESS STEEL &
GALVANISED
15 NB to 50 NB
FORGED, CARBON STEEL,
STAINLESS STEEL &
GALVANISED
FORGED FLANGE
15 NB to 500 NB
FORGED, CARBON STEEL,
STAINLESS STEEL &
GALVANISED
PLATE FLANGE (IS: 6392)
15 NB to 3000 NB
CARBON STEEL & STAINLESS
STEEL
“Ω - Type” EXPANSION BEND
25 NB to 200 NB
CARBON STEEL
BW ENDS FITTINGS
(TEE, ELBOW, REDUCER, CAP)
SW ENDS FITTINGS
(TEE, ELBOW, REDUCING COUPLING,
HALF & FULL COUPLING, ELBOWLET,
SOCKOLET etc.)
THREAD FITTINGS
(TEE, ELBOW, REDUCING COUPLING,
HALF & FULL COUPLING, ELBOWLET,
THREDOLET, NIPPLE etc)
N.B.: FEBRICATION JOB ALSO DONE AS PER CLIENTS DRAWING
4
MANUFACTURING PROCESS
5
PRODUCT
900 ELBOW
450 ELBOW
UNEQUAL TEE
EQUAL
TEE
COUPLING
450 ELBOW
6
BLRF FLANGE
WNRF FLANGE
SORF FLANGE
SWRF FLANGE
TESTING & INSPECTION
TUBE FORGED has fully equipped & inspection department managed by quality management system.
Dimensionally checking is carried out by our companies’ experiences skilled worker for the basic
needs in manufacturing quality fittings. We also carried out Chemical & physical test as per ASTM,
IS, BS, DIN from govt. approved laboratories.
* HARDNESS TEST MACHINE
* ULTRASONIC THICKNESS GAUGE
* TOUNG CALLIPER
* ANGLE PLATE
* VERNIER, INSIDE, OUTSIDE CALLIPER
* D.P. TESTING ARRANGEMENT
* DIAL, BEVEL GAUGE
* HYDRO TEST MACHINE
7
* TO SATISFY CLIENTS WITH BEST QUALITY
QUALITY CONTROL
•The raw materials are procured with proper mill test
certificate if mill test certificate is not available then
check test analysis is carried out
•All products are visually checked for any defects shrinkage,
cracks during manufacturing process. In case of any defect
found during inspection send to take necessary action
•We also check hardness at random.
•All the fittings manufactured are frequently checked
during machining in all dimension and thread. All thread
are checked by go and no go gauges to ensure proper
fittings for seal tightness.
•All machining products are checked by our quality
management personnel.
•All finished products are marked with proper size, pressure
rating, schedule, material specification, heat/lot no. as per
required code.
•All fittings are surface coating/acid pickling,
sort/sand blasting as per specified code and visually
checked for any defect as well as packaging properly
to avoid damages during storage or transit.
8
LIST OF CLIENTS
N.B.
:
WE SUPPLY OUR PRODUCT IN VARIOUS
FERTILIZERS PLANTS THROUGH OUR CLIENTS
STEEL PLANTS,
OIL
SECTOR
&
9
REGISTRATION CERTIFICATE
900 ELBOW
MECON LIMITED
EQUAL
TEE
SAIL, DSP
10
REGISTRATION CERTIFICATE
IBR, WEST BENGAL
SAIL, RSP
11
REGISTRATION CERTIFICATE
NSIC
SSIC
12
INSPECTION CERTIFICATE
LLOYDS REGISTER ASIA
M. N. DASTUR & CO. (P) LTD
13
WEBSITE : www.tubeforged.com
E-mail : [email protected]
[email protected]
[email protected]
14