Transcript Document

Disc Thickness Measurement
System
Disc Thickness Measurement System
Disc Thickness Measurement System
NI Based Measurement System
NI 9215
4-Channel, 100 kS/s, 16-bit,
±10 V Simultaneous
Sampling Analog Input
Module
• 4 simultaneously sampled
analog inputs, 100 kS/s
• -40 to 70 °C operating range
• NIST-traceable calibration
• Hot-swappable operation
• 16-bit resolution
NI Based Measurement System
NI 9421
8-Channel 24 V Logic, 100 µs,
Sinking Digital Input Module
8-channel, 100 us digital input
Hot-swappable operation
-40 to 70 °C operating range
12 to 24 V logic, sinking digital inputs
NI Based Measurement System
NI 9472
8-Channel 24 V Logic, 100 µs,
Sourcing Digital Output Module
8-channel, 100 µs digital output
D-Sub or screw-terminal connector
options
6 to 30 V range, sourcing digital
output
-40 to 70 °C operating range
Hot-swappable operation
NI Based Measurement System
NI 9073
Integrated 266 MHz Real-Time
Controller and 2M Gate FPGA
Rugged, embedded control and
monitoring system
266 MHz industrial real-time processor
for control, data logging, and analysis
2M gate, 8-slot FPGA chassis for custom
I/O timing, control, and processing
10/100BASE-T Ethernet port; RS232
serial port for connection to peripherals
-20 to 55 °C operating temperature
range; single 19 to 30 VDC power supply
input
Disc Thickness Measurement System
Mechnanical Work
Material Cost
65000.00
machining Charges
30000.00
Designing
Electrical
Electronics
15000.00
Panel
7500.00
Power Supply
5000.00
Stepper Motor & Drive
25000.00
High Speed Motor & drive
17500.00
2 axis motion PLC+HMI
50000.00
Profit
NI Measurment System
32250.00
NI 9073
90000.00
NI 9421
6750.00
NI 9472
6750.00
NI 9215
35000.00
Application Software
LVDT & Isolator
100000.00
50000.00
535750.00
NI Based Measurement System
CONTACT
VI AUTOMATION (P) LTD
C/2, APNA GHAR HOUSING SOCIETY,
SHANKARSHETH ROAD, PUNE 411042
PH: + 91 20 6400 2256 / 7
FAX: + 91 20 2645 1554
www.viapl.com
[email protected]