Transcript Folie 1 - Zavarivanje
Wel Handy Mini
For horizontal and vertical (down) fillet welding operations.
Wel Handy Mini
The Wel Handy Mini thanks his name to the small dimensions and his light weight.
The Wel Handy Mini is the best to work with in tight places. To minimize the dimensions a straight torch is the best solution for the Wel Handy Mini.
Features Wel Handy Mini
Excellent for working in tight places, Bi-directional, Digital display for speed adjustments, Vertical welding (only downwards), Easy guide wheel adjustment (12, 41, 57, 81mm), 16kg traction power, Limit switch for auto stop welding,
Features Wel Handy Mini
Highest stand off in the market (6mm), Easy analogue operation, Can easily climb 45 ° slope, Quick torch release holder, Traveling speed 100 – 1000mm/min,
Possible welding operations.
Wel Handy Multi
Wel Handy Multi
The “Multi” stand for Multiple Welding Operations. The Wel Handy Multi can be delivered with two types of controllers and two options, which makes it versatile. The welding operations are:
Horizontal Fillets Welding,
Vertical Down/up Fillets Welding ,
Flat Butt Joint Welding (with rail), Horizontal Butt Joint Welding (with rail),
Twin Torch
Tack Welding Longitudinal simultaneous welding both side Tandem welding Adapt to the Weaving Device
Two types of Wel Handy MULTI’S
Wel Handy Multi can pick from two base types.
Wel Handy Multi Standard Basic type with no digital display Can be adopted to twin torch option Wel Handy Multi Advance Equipped with tack capability Can be adopted to twin torch option Can be adopted with weaving option
Twin torch option
Increase productivity while decreasing heat distortion.
No.2 Wire feeder No.1 Wire feeder Signal interface box
The Feature of WEL-HANDY MULTI
Low cost, Compact & Light weight, L259 x W259 x H264.
6.9kg.
High durability, Aluminum die-cast body provides long and maintenance free life.
Low center of gravity, Low center of gravity provides stable performance even when climbing on a wall.
Strong pulling power, world and the climbing angle is up to 90 30kg pulling power is the No. 1 in the ° with standard machine.
Highest stand off in the market (6mm), Heat resistance wheels, High speed welding (1500mm/min), Wide range of torch positioning, Right and left positioning, Adjustment of 25mm of the shaft.
Torch angle, The torch can be set in the range of 40 ~ 55 ° Slide unit, The 45mm of torch slide unit gives a wide range of torch adjustment.
Durable roller and arm, The roller arm is a mono design and made with cast aluminum for higher durability.
Mono design also made harder for spatter to get inside of the roller for smoother movement.
Adjustable roller height Guide roller can set for 3 different height to avoid obstacles.
38mm 20mm 10mm
Push angle and Drag angle, The push angle and drag angle can be set up to 5 degrees.
Automatic return on magnet lever, Even if you peel off the truck by hold the handle after work completion of weld, magnet returns to off condition automatically.
It is possible to turn OFF with lever manually.
Push angle Drag angle Magnet OFF Magnet ON
Direction of the Handle, The left photograph is a standard position. It can turn 90 degree like the figure on the right.
Change the direction according to your torch configuration.
Absolute dustproof measure The mm. bottom board made complete dustproof structure by using the stainless steel of 1.5
Tool storage function 5 mm and also 6 mm L wrench are used for setting the torch position and the guide roller position.
These tools can be stored, as shown in the picture.
Operation panel It is a compact and simple operation panel.
the three kind of operation mode of TEST ARC, NEUT and ARC ON can be selected.
"START" and "STOP" are shown in different colors for the easy operation.
Wel Handy Multi, ADV
Setting the parameter for the TACK function:
Picture Tack Welding
Wel Handy Multi, ADV
Setting the parameter for the WEAVING function:
Picture of Weaving
Comparison List
Specification Dimension Weight Torch (type) Traveling speed Traveling direction Structure Climb up angle A number of parts Pulling power Location of control unit Location of operation unit Type of torch holder Drive method Steering method Height of guide roller Torch angle Adjusting range of torch Lead-in/Lead-out Speed display Auto stop Input power Wel-Handy Multi L259 x W259 x H264 mm 6.9kg
Curved torch 150～1500 mm/min Both of Left & Right Simple Up to 45 degree 30kg Back and low position Back and low position Slide type 4 wheel drive w/magnet load Guide roller １０、２０、３８mm 40°～55°(35°option) Horizontal 45mm Vertical 45mm Total 267ｍｍ None Limit switch AC42V 50/60Hz 87 Wel-Handy Mini L230 x W220 x H257 mm 7.8kg
Exclusive straight torch 100～1000 mm/min Both of Left & Right A little complicated 138 Up to 20 degree 16kg Front and high position Front and high position Fix 4 wheel drive w/magnet load Guide roller １２,４１,５７,８１mm 40°～60° Horizontal 32mm Vertical 32mm 125m/135mm Digital meter Limit switch AC100V 50/60Hz Ｗ el Handy L240 x W310 x H335 8.2Kg
Curved torch 200～1200 mm/min Left or Right Simple Up to 20 degree 14Kg Back and low position Back and low position Fix 4 wheel drive w/magnet load Guide roller Fix (42mm) 40°～45° Horizontal 32mm Vertical 32mm 120mm/120mm Digital meter Limit switch AC100V 50/60Hz
Optional Multi function
Easy rail Option
Flat Butt/Lap Joint Welding.
Horizontal Butt/Lap Joint Welding.
Twin Torch Option
Longitudinal simultaneous Welding both side.
Tandem Welding.
Tack Welding Version (only Advance type)
True distance tack welding
Weaving Option (only Advance type)
Large multiple and single pass welding up to 25mm
Optimum use in welding needs
O
Ｒ＝
3,000mm I
Ｒ＝
3,000mm
Ｒ＝
1,000mm
９０°＞
θ
＝８５°
θ
９０°＜
θ θ
＝１１０°
θ
＝
0-90
°
θ
＝０～２０°
L
＝
More than
４
0mm Minimum 300mm
User modification samples
User modification samples
User modification samples
Shipyard production
One operator can operate multiple Wel Handies for high productivity.
On the pictures you see typical panel line production at a shipyard.
Summary of Wel Handy Series
Versatility High Durability Compact & Light weight Simple structure Maintenance free The best on the market
FR-3 welding interface
FR-3 is developed to make IK-12Max as a welding carriage.
It makes automatic interface with welding machine.
Simple operation
Crater timer
Can be adapted up to 2 welding torch
WU Weaving unit
WU weaving unit is developed to make welding interface with weaving function to automate large weld.
It can be adopted to a carriage, positioner or any other jigs.
Two types to pick from
WU-1
WU-2
WU -1 Weaving unit
WU-1 is a stand alone unit. It can connect to welding power sources for automatic start and stop to synchronize with weaving. It can adopt to torch stand and manipulators.
WU-2 Weaving unit
WU -2 is equipped with power out put IO. It can give an signal for any carriage or positioner. It is also equipped with automatic stop with (limit switch) for full automation.