Transcript Document

Crochet by Machine
Machine Setup
• Size 90/14 universal point, embroidery (preferred),
topstitch or jeans needle
• Metallic (preferred) or regular thread in top
• Metallic thread in bobbin (wind slowly)
• Presser foot for Baby Lock:
- "N" foot (preferred) -or- Open Toe
• Presser foot for Bernina in order of preference:
- #39D / #39C / #39 (Clear Embroidery)
- #6 (Embroidery)
- #20D / #20C / #20 (Open Toe)
- #34D / #34C / #34 (Clear Zig Zag)
- #1D / #1C / #1 (Regular Zig Zag)
• Fold purple fabric longways so that centers meet
and press
• Pick serger
stitch shown
• Increase width
to as wide as
possible and
increase length
if desired
• Decrease tension
• Place water soluble stabilizer under the edge
• Sew slowly, catching edge of fabric with stitch
• Choose Triple Straight Stitch
• Sew, catching edge of previous stitch
• Choose serger stitch again and sew on water
soluble stabilizer, catching edge of previous stitch
• Choose serger stitch again and sew, catching
edge of previous stitch
• Don’t wash yet, but this is what it will look like:
•
•
•
•
Choose Honeycomb stitch
Change width to as wide as possible
Lower tension
Change balance so that stitches overlap
• Sew, catching edge of fabric
• Use Triple Straight Stitch to sew, catching edge
of previous stitches
• Use a running Serpentine stitch to sew, catching
edge of previous stitches
• Rinse away the water soluble stabilizer, using
warm to hot water