Transcript Slide 1

LHC Gas System
Tutorial
Remote / Local connection
S.Haider
Registration to Windows Terminal Services (WTS)
1. Register on the main Windows Terminal Server of CERN
•
Only necessary if you want to connect from outside CERN
•
https://winservices.web.cern.ch/winservices/
2. Register on the experiments terminal server by sending
an e-mail to [email protected]
•
Please state the following information:
1. Your full name and your NICE-username
2. The name of the experiment + sub-detector
3. Do you need write access to the gas systems,- do
you need to switch on/off modules? (read access is the
default login to the gas systems)
4. Duration during which the access is needed (where
applicable)
2
S.Haider
Aug 2008
Error message if you don’t have WTS access rights
If you see this logon / error message, please proceed with the
registration procedure on slide #2
3
S.Haider
Aug 2008
Terminal Server Names
 Important  User name: CERN\yourUserName
In the Remote Desktop Connection window, ALWAYS put CERN\
in front of your user name
CERN Main Terminal Server: CERNTS.cern.ch
LHC Experiments (concerning gas)
Alice: ALIDCSAGW001.cern.ch
Atlas : CERNTSATLDCS.cern.ch
CMS: CERNTSCMS01.cern.ch
LHCb: LBTS03.cern.ch
4
S.Haider
Aug 2008
ATLAS login procedure:
1. Connect to WTS of Atlas (Windows Terminal Service via Remote Desktop
Connection)
2. Select computer pcatlgcsgas
3. Select panel
vision/graphicalFrame/unicosHMI….
4. Press
Run-button
1.
2.
3.
5
S.Haider
4.
Aug 2008
CMS login procedure:
1. Connect to WTS of CMS
2. Press “GAS UI” button
6
S.Haider
Aug 2008
ALICE login procedure 1 (2)
1. In Remote desktop Connection
- under the tab “Program”
- tick “Start the following program on connection”
- put under “Program path and file name” the string
mstsc /v:ALIGCSTS001 /f
7
S.Haider
Aug 2008
ALICE login procedure 2 (2):
1. Connect to WTS of ALICE
2. When presented with an empty desktop….
3. Navigate + press 
8
S.Haider
Aug 2008
LHCb login procedure:
1. Connect to WTS of LHCb
2. Press “GAS UI” button
9
S.Haider
Aug 2008