Transcript Slide 1

National Federation of State
High School Associations
2008 NFHS Field Hockey Rules
Interpretation Meeting
B. Elliot Hopkins, CAA, NFHS Field Hockey Rules
Editor
Take Part. Get Set For Life.™
Rule 1-5-1, Player Uniform
 Effective January 1, 2011, Jersey/Top
color - 1. The home team shall wear single
solid white uniform tops front and back on
the torso and the visiting team shall wear
single solid black or dark-colored uniform
tops front and back on the torso. The
"torso" is the portion of the top from an
imaginary horizontal line at the base of the
neckline extending to each
armhole/sleeve, down to the bottom hem
of the top and from side seam to side
seam.
Rule 1-5-1, Player Uniform (cont.)
 Identifying Name –
2. Team names and/or abbreviations may be
placed on the front or back of the jersey/top. 3.
Lettering must be placed horizontally and may be
arched. Names may also be on multiple lines. 4.
The first and last letters, either above or below
the number, must be on the same horizontal
plane. When above the number, the plane may
not be below a plane extending through the top of
the number(s). When below the number, the
plane may not be above a plane extending
through the bottom of the number(s).
Rule 1-5-1, Player Uniform (cont.)
 5. Any point on any letter shall not be
closer than one inch to any point on any
number(s).
 6. Any form of decorative accent (i.e. paw,
halo, crown, star, etc.) in a name or
abbreviation is only permitted above the
number. If a tail is used in the lettering of
an identifying name or abbreviation the
name or abbreviation must be located
below the number.
Rule 1-5-1, Player Uniform (cont.)
 Above the Neckline –
 7. There are no restrictions in the area of
the jersey/top from an imaginary
horizontal line at the base of the neckline
extending to each armhole/sleeve, up to
the shoulder seam. 8. Different colors
and/or designs may be used in this area.
Neckline and Armhole/Sleeve Trim - 9.
Trim shall not exceed 1 inch around the
neck and arm openings.
Rule 1-5-1, Player Uniform (cont.)
 Side Inserts –
 10. Side Inserts must be centered vertically below
the armpit.
 11. The width of the side inserts, including trim
must be a maximum of 4 inches (2 inches on each
side of the seam).
 12. The style/design of the side insert may be of
any color or design. Side inserts must be the
same width for all team jerseys.
Commemorative/memorial patches not to exceed
4 square inches with the state association
approval may be worn in this area or above the
neckline.
Rule 1-5-1, Player Uniform (cont.)
 Rationale: The uniforms are becoming
increasingly difficult to differentiate between
home and visitor uniform tops. The new
jerseys’/tops' predominant colors are slightly
bigger than the side panels and are causing
confusion with the game officials when
making rulings and issuing penalties.
Legal Uniforms
 Trim shall not exceed 1”inch around the neck and arm
openings.
 The home team shall wear single solid white uniform tops
front and back on the torso. The torso is the portion of the
top of the imaginary horizontal line at the base of the
neckline extending to each armhole/sleeve, down to the
bottom hem of the top and from side seam to side seam.
Legal Uniforms
 No restrictions in the area of the jersey/top
from an imaginary horizontal line at the
base of the neckline extending to each
armhole/sleeve up to the shoulder seam.
Legal Uniforms
 Side inserts must be centered vertically below the armpit.
 The width of the side inserts, including trim must be a
maximum of 4” inches (2”inches on each side of the seam).
 The style/design of the side insert may be any color or
design.
Illegal Uniforms
 The width of the side inserts, including
trim must be a maximum of 4” inches
(2”inches on each side of the seam).
 The style/design of the side insert may be
any color or design.
Illegal Uniforms
 The width of the side inserts, including
trim must be a maximum of 4” inches
(2”inches on each side of the seam).
 Side inserts must be the same width for all
team jerseys.
Illegal Uniforms
 Trim shall not exceed 1”inch
around the neck and arm
 openings.
Uniforms – Legal Styles/Designs
 Members of each team shall be
dressed uniformly, except the
goalkeeper.
 The uniform top shall have clearly
visible numbers on the front and
back.
 The numbers shall be of a solid
color contrasting to any surrounding
colors.
Uniforms – Legal Styles/Designs
 The “torso” is the portion of the top
from an imaginary horizontal line at
the base of the neckline extending
to each armhole/sleeve, down to
the bottom hem of the top and from
side seam to side seam.
Uniforms – Legal Styles/Designs
 Coaches and school administrators
must ensure that legal uniforms are
being ordered and purchased from
manufacturers/distributors.
 The following slides illustrate
information sent to each state
association.
Uniforms – Legal Styles/Designs
E
E
D
C
B
D
High School
Name
C
Last Name
25
B
25
A
A
B
A
C
Front View
Back View
Side View
Uniforms – Front View
A. UNIFORM TOP COLOR
A
1. The “torso” is the portion of the uniform top
from an imaginary horizontal line at the
base of the neckline extending to each
armhole, down to the bottom hem of the
uniform top and from side seam to side
seam.
2. The torso of the uniform top must be a
single solid color (as of the 2011 season,
white for home and dark or dark-colored for
visitor).
NOTE: A “locker-tag” near the bottom of a jersey/uniform top designed to be
tucked in, is not interpreted as “visible.”
Uniforms – Front View
B. FRONT NUMBER
B
25
1. The number on the front
shall be 3” to 6” inches
high.
2. Numbers shall be plain
Arabic numerals.
Uniforms – Front View
B. FRONT NUMBER
3. Any number from 0 through 00
are legal. A team may not use
both numbers 0 and 00.
B
25
4. Three digit numbers and
duplicate numbers on player
of the same team are not
permitted.
Uniforms – Front View
C. IDENTIFYING NAME
C
High School
Name
25
1. Team names and/or
abbreviations or team member’s
names may be placed on the
front of the uniform top.
2. Lettering must be placed
horizontally and may be arched.
Names may also be on multiple
lines.
Uniforms – Front View
C. IDENTIFYING NAME
C
High School
Name
25
3. The first and last letters, either above
or below the number, must be on the
same horizontal plane. When above
the number, the plane may not be
below a plane extending through the
top of the number(s). When below the
number, the plane may not be above a
plane extending through the bottom of
the number(s).
4. Any point on any letter shall not be
closer than one inch to any point on
any number(s).
Uniforms – Front View
C. IDENTIFYING NAME
C
High School
Name
25
5. Any form of decorative accent
(i.e., paw, halo, crown, star, etc.)
in a name or abbreviation is only
permitted above the number.
6. If a tail is used in the lettering
of an identifying name
or abbreviation, the name or
abbreviation must be located
below the number.
Uniforms – Front View
D. ABOVE THE NECKLINE
D
High School
Name
25
1. There are no restrictions in
the area of the uniform top from
an imaginary horizontal line at
the base of the neckline
extending to each armhole, up to
the shoulder seam.
2. Different colors and/or designs
may be used in this area.
3. Commemorative/memorial
patches (not to exceed 4 square
inches), if worn, must be in
this area or in the side insert.
Uniforms – Front View
E. NECKLINE & ARMHOLE TRIM
E
High School
Name
25
1. Trim shall not exceed 1 inch
around the neck and arm
openings.
Uniforms – Back View
A. UNIFORM TOP COLOR
A
1. The back “torso” is the portion of
the top from the bottom of the
back panel, if used, down to the
bottom hem of the uniform top
and from side seam to side
seam.
2. The back torso of the uniform
top must be the same single
solid color as the front.
Uniforms – Back View
B. BACK NUMBER
B
25
1. The number on the back shall be
6” to 8” inches high.
2. The back numbers shall meet all
the remaining specifications of
the front number as previously
noted (Front View, B.2-B.4).
Uniforms – Back View
C. IDENTIFYING NAME
C
Last Name
25
1. Team names and/or
abbreviations or team member’s
names may be placed
horizontally on the back of the
uniform top.
2. Lettering on the back of the
uniform top shall meet all the
specifications of the front
lettering as previously noted
(Front View, C.2-C.6).
Uniforms – Back View
D. BACK PANEL
D
Last Name
25
1. If a back panel is used, it must
be of the same color, and not
exceed the size of the
corresponding area in the front,
above the neckline.
Uniforms – Back View
E. NECKLINE & ARMHOLE TRIM
E
Last Name
25
1. Trim shall not exceed 1 inch
around the neck and arm
openings.
Uniforms – Side View
A. LOCATION
1. Side inserts must be centered
vertically below the armpit.
A
B. WIDTH
B
1. Side inserts, including trim,
must be a maximum of 4 inches
(2 inches on each side of the
seam).
Uniforms – Side View
C. STYLE/DESIGN
C
1. Side inserts may be of any color
or design.
2. Side inserts must be the same
width for all team uniform tops.
3. Commemorative/memorial
patches (not to exceed 4 square
inches), with the state
association approval may be
worn, must be in this area or in
the area above the neckline.