Soil Color - University of Georgia
Download
Report
Transcript Soil Color - University of Georgia
Site Characteristics
Location:
Latitude and longitude or other standard system; Township, range, section;
meets and bounds. From map or Geo-positioning system (GPS).
Climate:
Temperature (annual and seasonal), rainfall (annual and distribution),
potential evapotranspiration; impact on soil use and soil development
Vegetation:
type, species, etc. Describe in as much detail as possible. Historic
vegetation impact on soil development
Land Use:
cropland, forest land, rangeland, etc.
Physiographic province:
Piedmont, Coastal Plain, Ridge and Valley, etc
Landscape: slope gradient, slope shape, aspect, land form, landscape postion
Parent material: type, relation to landscape
GA Major Land Resource Areas (MLRA)
Geomorphic Surface
floodplain (natural levee or back swamp)
low terrace
high terrace
upland
dune
alluvial fan
moraine
many others
Terraces
Floodplain
Upland
Geomorphic Position
headslope, noseslope, sideslope
convergent slopes collect runoff and shallow subsurface flow, i.e.
wetter parts of the landscape
divergent slopes shed runoff and shallow subsurface flow, i.e. drier
parts of the landscape.
Site Characteristics - Slope
Percent (or degrees)
Shape - both parallel and
perpendicular to contours - convex,
plane, or concave
impacts land stability, runoff and
erosion, and hydrology
Aspect - compass point or degrees
impacts temperature and
associated ET
cooler, wetter soils on north
and east facing slopes
Hillslope Position
In humid climates, hillslopes are normally recognized to have 5 components,
summit, shoulder, backslope, footslope, and toeslope.
Hydrology, soil development, erosion, and parent material are often affected
by hillslope position.
Summit – most stable position; may be wet (flat) or dry (convex)
Shoulder – convex position; most erosive, dry, least developed soils
Backslope – more stable than shoulder?; upper part dry; lower part wet
Footslope – concave position; may have colluvial parent material; wet soils
Toeslope – commonly alluvial parent materials; often wet soils (same as “bottom”)
Summit
Shoulder
Backslope
Footslope
Toeslope
Parent Material
Residuum
Transported
Alluvium
Marine sediments
Lacustrine deposits
Volcanic ash
Loess
Eolian sand
Glacial drift (till, outwash, various landforms)
Colluvium
Organic (peat, muck)
Tetonic Landscapes
All continents are part of crustal plates and have two common
components:
Cratons - expansive, stable regions of low relief typically in the central
part of the continent
Stable is key word – little uplift or metamorphism
Old soils on old landscapes
Glaciation creates new younger landscapes
Folded linear mountain belts - common on the margins of continents
Occurrence related to current or past collisions of plates
Rocks are typically extensively metamorphosed with intrusions of igneous
rocks
Relief is high
High rates of erosion prevent development of very mature soils
Craton: stable
continental core
Orogenic belt: margin
subject to tectonic
forces (mt-building)
Coastal plain: transient
zone of deposition
Generalized geology
of the eastern
continental margin
Residual Parent Materials
-- Mineral composition of rock has major effect on rate, degree, and
end result (soil properties) during weathering
> “mafic” vs. “felsic” igneous rocks: large effect of soil development
(clay content and mineralogy, permeability, leaching, etc.)
> sandstone vs. shale: coarse vs. fine textured soils
-- Permeability/porosity of rock also a factor
> fractured vs. intact rock (meta vs. intrusives in Piedmont)
> limestone (porous) vs. shales (laminar, rel. impermeable)
Fluvial Landforms
Channel deposits
Coarse grained
Overbank deposits
Texture varies across the floodplain
Both mineralogy and particle size of deposits depend
on properties of the material in the watershed
Stream Terraces
Floodplain
Country Rock
Alluvial Fill
Terrace 1
Terrace 1
Floodplain
Country Rock
Alluvial Fill
Terrace 1
Terrace 1
Terrace 2
Floodplain
Country Rock
Alluvial Fill
Highest elevation terrace is the oldest and the terraces become
progressively younger as elevation decreases.
Glacial Landforms
Climate change is the rule rather than the exception
Continental glaciers that covered much of the high latitude regions of
the earth during ice ages
Sculpted most of the landforms in these areas
Drive wide variations in sea level (low during Ice Ages)
Wide variety of landforms, and glacial deposits widely variable
Outwash: water-sorted, deposited during melt (glacial retreat)
Till - material pushed, churned, and modified under the glacial ice
Poorly sorted with particle sizes that range from clay to boulders
Composition depends on what was present in the path of the glacier
Limit of Glaciation in North America
Loess
Silty aeolian materials
Seasonal changes in amount of meltwater from glaciers results in broad
floodplains covered with fresh sediment and no vegetation
Sediment was entrained by wind and deposited in the adjacent uplands
Eolian sand near floodplain
Silt and clay farther away
Loess deposits are extensive and blankets existing landforms
Thickness decreases with distance away from the river source
Age of soils on loess and other glacial landforms about same age as
deposits ~ 12,000 ybp
Loess
Marine Deposits
Deposits actually deposited at the sea-land interface
Typically low relief with unconsolidated sedimentary materials
Variety of coastal environments including:
Beaches, dunes: graded, bedded sands
Marshes: fine clayey deposits
Channel deposits and deltas: mixed sands and gravels
Off-shore deposits: layered silty/clayey deposits; limestone (reefs)
Great fluctuation in sea level over geologic history
Transgression/regression deposits: layers of varying composition
Particle size and composition of sediments vary with the environment
in which they were deposited
Mineralogy is strongly influenced by the mineralogy of the soils and
sediments in the watersheds of the streams
SEDIMENT CHARACTERISTICS AS FUNCTION OF DEPOSITIONAL ENVIRONMENT
Limestone Deposits
Calcite (CaCO3) or dolomite (CaMg(CO3)2)
Precipitated by marine organisms on continental shelf some distance
from the shoreline
Minimal amount of silicate minerals
As limestone weathers, the calcite and dolomite dissolve and are
leached from the soil
Limestone derived soils are formed from the non-carbonate residues
Often clayey
Humid regions – soils often clayey and red
Arid and semi-arid regions – accumulations of calcium carbonate in
the subsoil because of incomplete leaching
GA Major Land Resource Areas (MLRA)
SOIL INTERPRETATIONS
--INFERENCES about derived properties, capabilities, and
potential uses of a given soil based on profile and
landscape properties
Derived properties:
> saturated hydraulic conductivity (water flow)
> available water holding capacity
> infiltration rates, erodibility
Capabilities/Potential Uses:
> agriculture, crop production, forestry
> urban land use: construction, roads, on-site waste
water disposal (septics)
SLOPE GRADIENT
-- major determinant for many uses
-- slope classes
0-2%
2-6%
6-10%
10-15%
15-25%
>25%
Ag use
nearly level
gently rolling
moderately rolling
steeply rolling
steep
really steep
Capabililty class
unrestricted
some restrictions
mod. restrictions
severe restrictions
---no ag use-----no ag use---
-- slope affects urban land use also, but less severely…
I
II
III
IV
V
VI
AVAILABLE WATER HOLDING CAPACITY
--based on rooting depth (depth to Cr, Cd, cemented or R horizon), or to 150 cm;
--water holding of each horizon in rooting zone, based on TEXTURE
Textural classes: sil, si, sicl:
All Other Textures
s, ls
Procedure:
cm H2O/cm soil
0.2
0.15
0.05
1) add up depths of horizons that have textures in the THREE groups
2) correct for gravel %
3) for each group, multiply by the AW per cm soil
4) sum up for each group, and rate the profile according to:
Very Low:
Low:
Moderate:
High:
≤ 7.5 cm
>7.5 - 15 cm
>15 - 22.5 cm
> 22.5
EXAMPLE CALCULATION FOR SOIL PROFILE:
depth
thickness
fragments
equivalent
thickness
0-20
20
5
19
sil
0.2
3.80
20-35
15
20
12
sicl
0.2
2.40
35-75
40
0
40
c
0.15
6.00
75-120
45
10
40.5
cl
0.15
6.08
120-180
60
10
54
ls
0.05
2.70
TOTAL
20.98
texture
cm/cm
total cm
Water Flow Rates
-- Saturated hydraulic conductivity can be estimated from field evaluated
morphological properties, based on most limiting layer in entire profile
LOW:
1. fragipan in profile; OR
2. at least one horizon with sc, c, and sic texture with massive, weak or platy structure
AND some ≤2 chroma colors in horizon; OR
3. ≤2 chroma colors occurring directly above a Cr or R horizon
HIGH:
s and ls texture throughout profile
MODERATE: all other profiles
-- Engineering and septic uses depend upon Ksat
--can be measure in field; extremely variable property…
Ks, cm/h
0.16
0.08
0.13
0.16
0.28
0.40
0.63
0.40
1.03
0.08
0.32
0.05
5.78
0.06
1.39
1.82
0.08
0.68
0.47
1.11
1.08
0
5m
Estimates of Ks for given soil horizon
Ks is a function of pore size distribution and tortuosity.
Pores in the soil can be grouped into three types:
Packing pores
Formed by packing of particles
Size depends on particle-size distribution
Intraped pores
Formed by packing of soil structural units (peds)
Size and abundance depend on degree of structure formation and
other structural properties
Biopores
Formed by activity of flora and fauna in the soil
Clay
0.002 mm
10 mm
Sand
2 mm
10 mm
Estimates of Ks Based On:
Texture
Analog for size distribution of packing pores
Structure
Greatest effect for unstructured non-sandy soils and strongly
structured clayey soils
Shape may also have an impact
Consistence
Firmer consistence indicates binding at grain contacts
Cementation that partially fills pores
Clay mineralogy (shrink swell)
Difficult to estimate in the field
Rely on accessory properties and tendency for mineralogy to be
similar within regions
Structure Effect on Ks
Horizon
Bt1
Bt3
BC
C
Depth
cm
20-46
79-112
185-194
269-328
Structure
Clay
Ks
2sbk
2sbk
1sbk
0
%
48
43
33
6
Cm/h
2.3
0.5
<0.1
1.6
Soil Wetness Class
Reflects the rate at which water is removed from the soil by both runoff and
percolation.
Influenced by climate, slope, hydraulic conductivity, and landscape position.
Wetness class is inferred from presence of matrix or redox depletions with
value of 5 or more and chroma of 2 or less
Wetness Class
Depth to chroma 2 color
cm
1
>150
2
100-150
3
50-100
4
25-50
5
<25
Soil Drainage Class
Related to soil wetness class and is more commonly used.
Better referred to as “Agricultural Drainage Classes”
Definitions are not rigid
Excessively drained
Somewhat excessively drained
Well drained
Moderately well drained
Somewhat poorly drained
Poorly drained
Very poorly drained
Seasonal Saturation
Seasonal saturation has a major impact on soil behavior and
appropriate use of soil for many applications
Induces anaerobic conditions which may impact growth and survival
of crops as well as native plant species
Major implication of seasonal saturation for urban interpretations is
that you “cannot put more water into a full bucket
If subsoil horizons are saturated and there is sufficient gradient, there
is a potential that the water in the soil and added wastewater will
move downslope
May also provide a direct linkage to deeper groundwater aquifers.
Water Table Measurement
Relatively simple to measure with wells or piezometers
Because of annual and seasonal water table fluctuation,
need multiple years of measurement
Water Table Measurement
2.0
Water Table Depth, feet
0.0
-2.0
-4.0
-6.0
Upslope
-8.0
-10.0
Apr-94
Depression
Aug-94
Nov-94
Feb-95
May-95
Sep-95
Dec-95
Mar-96
Jul-96
Oct-96
Interpretation of Seasonal Saturation
Accurate measurement of water table heights is time
consuming and expensive
Redoximorphic features used as indicators of horizons
that are seasonally saturated
Munsell chroma 2.
No information on duration or season of saturation
A few studies have developed relationships between
redox features and duration of saturation
Limited geographic extrapolation.
Relation of Seasonal Saturation to Redox Features
Feature
Percent of
Time Saturated
None
4
Redox concentations
20
Redox depletions
42
Dominant gray color
51
Interpretations for Specific Uses
Based on morphological and other properties of the soil
If soil properties and the impact of the properties on the use are
understood, any use interpretation can be made from basic
properties.
The key is understanding how the soil impacts the use.
Property
Slight
Moderate
Severe
Dwellings without Basements
Flooding
none
-
any flooding
Depth to high water table (cm)
>75
45-75
<45
Shrink-swell potential
low
moderate
high
Slope (%)
<8
8-15
>15
>1.5
1-1.5
<1
Depth to cemented horizons (m)
>1
0.5-1
<0.5
Cobbles and stones (volume %);
weighted average of 25-100 cm
depth
<30
30-65
>65
Depth to hard bedrock (m)
Dwellings with Basements
Flooding
none
-
any flooding
Depth to high water table (cm)
>150
75-150
<75
Shrink-swell potential
low
moderate
high
Slope (%)
<8
8-15
>15
>1.8
1-1.8
<1
Depth to cemented horizons (m)
>1
0.5-1
<0.5
Cobbles and stones (volume %);
weighted average of 25-100 cm
depth
<30
30-65
>65
Depth to hard bedrock (m)
Soils and Geomorphology - Definitions
Geomorphology (geo(Greek) = earth; morphos = form): the science that
studies the properties and evolution of the earth's surface.
the landscape is viewed as an assemblage of landforms which are individually
transformed by geomorphic processes.
because soils are an integral part of landforms and landscapes, processes
occurring on the landscape have implications for soil development.
Conversely, soil processes can be considered to be a part of landscape evolution.
Landscape: the portion of the land surface that the eye can comprehend in a
single view.
Landforms: distinctive geometric configurations of the earth's land surface;
features of the earth that together comprise the land surface
Soils and Geomorphology – Definitions (con’t)
Geomorphic surface: a part of the surface of the land that has definite
geographic boundaries and is formed by one or more agents during a given
time span.
It should be considered as a surface, i.e. similar to a plane, no thickness (z) - only
x and y dimensions. Because it is formed during a specific time it is datable,
either by absolute or relative means.
Erosion surface: a land surface shaped by the action of ice, wind, and water;
a land surface shaped by the action of erosion.
Constructional (depositional) surface: a land surface owing its character to
the process of upbuilding, such as accumulation by deposition (either fluvial
or colluvial).
Geomorphic Principles
Geomorphology important in two areas
(1) age, properties, and development rate of soils and
(2) hydrologic patterns on landscapes including soil effects on water re-distribution
across the landscape.
Soil age:
Soil development does not commence until the erosion or deposition rate has
reached a steady state that is less than the rate of soil formation.
For depositional surfaces, soil age is similar to the age of deposit.
radiocarbon or other dating methods of the deposit are useful for determining soil age.
This is not true for erosional surfaces.
There may have been multiple erosion episodes since the material was deposited or
exposed at the surface.
Often the best age that can be derived is a relative age of the surface compared to other
geomorphic surfaces in the area.
Law of Superposition
Younger beds occur on older beds if they have not been overturned
A
C
Bed 1
Bed 1
Bed 2
B
Bed 2
D
Bed 1
Bed 2
3
2
4
2
Bed 1
3
2
Relative Age of Erosional Surfaces
An erosional surface is:
younger than the youngest material it cuts
younger than any structure it bevels
younger than fossils beneath the surface
is the same age or older than terrestrial
deposits lying on it
older than the valleys which have been cut
below it
younger than materials forming an erosion
remnant above it
older than deposits in the valley below it
younger than any adjacent surface which
stands at a higher level
older than any adjacent surface which stands
at a lower level
A hillslope is the same age as the alluvial
valley fill to which it descends but is
younger than the higher surface to which it
ascends.
Depositional
Surface A
Erosion Surface B
Depositional
Surface A Erosional Element,
Bed 1
Bed 2
Surface B Depositonal Element,
Surface B
Bed 3
Erosion Surface C
Hillslope Development
Most upland landscapes have been sculpted by
continual erosion and removal of material by streams.
Landscape development by erosion can be considered
to be cyclic and progresses through various stages;
youth, maturity, and old age over time.
Davis, Penck models: assume uniform, gradual
development of valley development, landscape
downcutting over time.
Davis’ Stages of Hillslope Development
Davis’s Stages of Landscape Development
Beginning
Mature
Youthful
Old
Implications of Davis’ Theory
In mature or normal landscapes, surficial material was being removed
at a slow but constant rate
Superposed on the rate of loss of surface material was a rate of soil
formation
The landscape was considered to be in “equilibrium”
relative rates of downwaring and soil development determined
the characteristics of the soil
the soil developed on the landscape would have the same
characteristics over long periods of time
Soils thought to be in this equilibrium were considered to be
“normal”
Downwaring of Hillslopes – Davis (1890)
T1
T2
Downwasting (Davis)
T3
T4
Backwasting (Parallel Slope Retreat) (Penck, 1920’s)
Parallel Slope Retreat (Penck)
T1
T2
T3
T4 T5
Modern Concepts in Geomorphology: Process-based
“Dynamic equilibrium” –downwasting and uplifting forces, change over time
Erosional/Depositional Processes:
Fluvial: channel incision, sediment transport/deposition/export from landscape
Aeolian: erosion/deposition via wind processes
Hillslope: soil creep, mass wasting, landslides
Weathering: mass loss, selective dissolution, mineral transformations
Regional Processes:
Glacial: reshapes whole landscapes; affects sea levels
Volcanic: mt building; source of new topography, parent material
Tectonic: continental changes over geologic time; uplift, mt building, etc
Climatic Factors:
Precip., temperature affect MOST other processes
Climate changes OFTEN over geologic time
Landscape must RE-adjust to new climate conditions
Hillslope Position
In humid climates, hillslopes are normally recognized to have 5 components,
summit, shoulder, backslope, footslope, and toeslope.
Hydrology, soil development, erosion, and parent material are often affected
by hillslope position.
Summit – most stable position; may be wet (flat) or dry (convex)
Shoulder – convex position; most erosive, dry, least developed soils
Backslope – more stable than shoulder?; upper part dry; lower part wet
Footslope – concave position; may have colluvial parent material; wet soils
Toeslope – commonly alluvial parent materials; often wet soils
Summit
Shoulder
Backslope
Footslope
Toeslope
Hydrology and Geomorphology
Movement of water and solutes across a landscape depends on
geomorphic and stratigraphic relationships including landscape
distribution of soil horizons
Water runs downhill
Across surface
In the shallow subsurface, especially if soil has water-restrictive
horizons
Darcy’s law
J = Q/A = Ks(dh/L)
Most commonly applied to vertical flow through soils
Also applicable to lateral water flow across the landscape
Hydrology and Geomorphology
In rolling landscapes with convex hillslope summits, soils on the lower part of
the hillslope will be wetter than soils higher in the landscape
In the landscapes with the low relief and broad interfluves, little gradient to
move water laterally to streams
Soils in the central part of the interfluve have high seasonal water
tables and are often poorly drained
Near streams, gradient for lateral movement of water is greater and
the soils are better drained
“Dry Edge“ or “Red Edge” effect
As interfluve narrows, proportion of landscape that is “edge” increases
End product is rolling landscape with convex summits
Darcy’s Law and Lateral Water Movement
Water “stacks up”
= wetter soils
Well drained soils
10 m
10 m
100 m
J = Ks(dh/L)
J = (20 cm/d) X (9.9 m/100 m) = 1.98 cm/d
J = (20 cm/d) X (0.1 m/10 m) = 0.2 cm/d
“Dry edge”
3m
1000 m
100 m
J = (20 cm/d) X (0.5 m/1000 m) = 0.01 cm/d
J = (20 cm/d) X (2.5 m/100 m) = 0.5 cm/d
Dry Edge Effect Broad Interfluve
Water Table Depth, m
0
Seasonal High Water Table
-1
Seasonal Low Water Table
-2
-3
0
1
2
Distance, km
3
Hydrology and Geomorphology
Depth to seasonal water table
effects properties in addition to
color
E horizon thickness
Bt clay content
E clay content
Mineralogy
Impact on water movement
through the soil
High water table = limited leaching
Well drained = maximum leaching
E Thickness
200
B Clay Content
150
100
50
E clay Content
0
0
50
100
150
D epth to H igh W ater T able
200
250
Hydrology and Geomorphology
Landscape configuration and distribution of soil horizons influence
paths for movement of water and solutes in the subsurface
5 factors that influence soil development
Climate
Relief
Biology (mostly vegetation)
Parent material
Time)
Parent material and relief have the greatest impact at a local scale
Stratigraphy, geomorphology, their relationship to each other and
landscape hydrology