Transcript ITRI投影片範本B
Progress Report on APMP.M.FF-K2 Hydrocarbon Flow (bilateral comparison) Chun-Min Su CMS/ITRI, Chinese Taipei Nov. 26, 2012, APMP 2012 TCFF Meeting Wellington, New Zealand Introduction Pilot Laboratory: CMS/ Chinese Taipei Participant laboratory: VMI/ Vietnam Overview of comparison Transfer Test flowrates: (5 to 30) L/s, 11 flow points Original New standard: 4" PD meter (Kral) Cardinal point: Re= 76 150 comparison point: Re= 120 000 Comparison parameter: Strouhal No. Strouhal = K × D3 (temperature-compensated) D Dr (1 (T Tr)) Copyright 2012 ITRI 工業技術研究院 2015/7/18 2 Summary of the Comparison • CMS tested the TS with solvent oil @ 20 ℃ and 35 ℃ (Comparison point @ 34.9 ℃) • VMI tested the TS with kerosene @ 29.0 ℃ to 36.4 ℃ (Comparison point @ 29.3 ℃) • NMIJ was invited to perform tests with kerosene and light oil @ 20 ℃ and 35 ℃ • Comparison was made without viscosity correction • The En value of VMI at Re=120000 is 0.28 • Operation condition of CMS is quite different from that in CCM-WGFF key comparison. No linkage to KCRV was provided. Copyright 2012 ITRI 工業技術研究院 2015/7/18 3 Schedule Progress Organization Date Comparison test CMS, VMI Jun. to Dec., 2009 Viscosity effect test NMIJ Feb. to Mar., 2010 Draft A v.1 CMS Aug. 2010 Progress reported to APMP TCFF Nov. 2010 Draft A v.2 CMS Aug. 2011 Draft A Reviewed by TCFF Chair VMI Sep. 2011 Draft B CMS Nov. 2011 Progress reported to APMP TCFF Nov. 2011 Draft B Submitted to WGFF Chair Dec. 2011 Draft B revision CMS Jan. 2012 Draft approved by and submitted to WGFF Chair BIPM Mar. 2012 Copyright 2012 ITRI 工業技術研究院 2015/7/18 4 Final Report • Status: approved for equivalence • “Final report on APMP.M.FF-K2 bilateral comparison: Hydrocarbon liquid flow” published – 2012 Metrologia, Volume 49, Technical Supplement 07004 Copyright 2012 ITRI 工業技術研究院 2015/7/18 5 Thank you for your attention! Copyright 2012 ITRI 工業技術研究院 2015/7/18 6