Transcript Lecture 3 - Engineering and Technology IUPUI

ME 462 Capstone Design
Pressurized Reactor
Presented by:
Rita Russell
Adam Schulte
Shahid Osman
Tiffany Urias
Objective
– To design an enclosed container to safely
encase test tubes held in a reaction rack,
be able to supply heat from an outside
source, and provide a pressurized
anaerobic environment while transmitting
a magnetic field for stirring.
Design Specifications
• Exterior case with removable reaction tube rack
– Fixed size of tube rack; racks with different tubes
interchange
• Thermo-stated case with heating 25-150 ºC
• Pressure range of 0-100 psig; vacuum desirable
• Non-magnetic for all materials used
– Stirring of contents via magnetic field through the
case
– Minimize distance between tube rack bottom and
the outside bottom
• Quality of the seal is critical for small scale runs
(evaporation)
Gantt Chart
Start QFD
Evaluate Engineering Benchmarks
Eval. Benchmarks/Gen. Concepts
Generate / Evaluate Concepts
Evaluate Concepts with Lilly Contacts
Write and Present Proposal
build/test
Prototype 1
write owner's
manual, final report
build/
test P2
Concept
Generation
Concept
Evaluation
Function
Decomposition
Develop Tasks for Individuals
QFD
Week of
Jan
25 to 31
Feb
1 to 7
8 to 14
15 to 21
22 to 28
2-29 to 3-7
March 7 to 13
14 to 20
21 to 27
3-28 to 4-3
April
4 to 10
11 to 17
18 to 24
4-25 to 5-1
May
2 to 8
Research Manufacturing (Spring Break)
Start of 1st Prototype (Ideally)
Start Users Manual
Evaluate/Test Prototype
Robust Design/Changes/Analysis
Start 2nd Prototype
Catchup (If Necessary)
Final Report due /Project
Competitors
Terra Universal SS
Terra Universal Acrylic
Tupperware
Newco INDELCO
vacuum device
QFD
•
•
•
•
•
List of Customer Requirements
Weighing of Customer Requirements
List of Competitors Products
List of Engineering Requirement
Comparision of Competitors Products to
Customer Requirements
QFD
Functional Decomposition
Conceptual Design
Concept: Flip Lid
Concept: File Drawer
Concept: Clam Shell
Concept: Sliding Lid
Decision Matrix
Final Concept: File Drawer
Specified Parts
Thermo coil
Stainless Steel
3-way
Valve
Decided Parts
Handles
Latches
Thermocouple
O-ring
Pressure
Release
Valve
ANSYS
Prototype
Improvements to Prototype
• Decreased Weight
– Decreased Thickness of Material
– Decreased Volume by 23 in3
• Replaced Rails with Grooves and Pins
• Decreased Length of Thermo coils
ANSYS
Final Design Open
Final Design Closed
Exploded View Final Design
Acknowledgements
• Dr. Jie Chen (Advisor),
• Mr. Charles Alt and Mr. David Bradley (Eli
Lilly),
• Mr. Bill Bell and Mr. Dean (The
Tarpenning-LaFollette Co.),
• Mr. Tom Rich (L.T. Rich Products)
Questions and Comments