MINER’S OFFICERS CONFERENCE MACKAY 2000

Download Report

Transcript MINER’S OFFICERS CONFERENCE MACKAY 2000

MINING INDUSTRY HEALTH
& SAFETY CONFERENCE
2000
Presentation on Coal Mining Safety
and Health Regulation 2000
29 August 2000
1
Please Note
• While the intention of these regulations has been
agreed the actual wording is still being worked out
by Parliamentary Counsel as they draft the
regulations.
• Approaches could change for this reason; things that
now require a Standard Operating Procedure could
end up as a general requirement of the mines safety
and health management system or vice versa
Acceptable Levels of Risk
What does it mean? How is it achieved?
• If regulation applies follow it;
• If Recognised Standard tells how, follow it or;
• Control risk equally or better; or
• Other wise:
– exercise reasonable precautions;
– and proper diligence
Acceptable Levels of Risk and
How You Achieve it
• If a regulation exists, follow it;
• If Recognised Standard tells how, adopt the method;
or
• Develop your own method; but it must control risk
equally or better;
• If no regulation or Recognised Standard
– exercise reasonable precautions; and
– proper diligence
The Regulations
• Are about subjects specified in the Act
• Gives further details of requirements
• Can be prescriptive (tells exactly what must be
done)
• Can be enabling (tells what must be achieved and
allows choice of method)
• Cannot contradict the Act
The Coal Mining Safety and
Health Regulation 2000
The Regulations have four chapters
• Chapter 1: Preliminary
• Chapter 2: Apply to all coal mines
• Chapter 3: Applying to Surface mines
• Chapter 4: Applying to Underground mines
The first important Definition:
Surface Mine;
Schedule 3 of the Act
“Surface Mine” means • a coal mine other than an underground mine ;or
• the surface operations of an underground coal
mine
Chapter 1: Preliminary
• Gives title: Coal Mining Safety and Health
Regulation 2000
• Indicates purpose: Prescribing ways to achieve
an acceptable level of risk
• States there is a dictionary that defines certain
words
Chapter 2: Applies to all Coal Mines ;
11 Parts in this Chapter
Chapter 2 – Part 1: Safety and
Health Management System
• Restates elements of system
– risk identification
– hazard analysis
– hazard management and control
• Requires keeping records of risk assessment
Safety and Health Management System:
Training
• Identify training needs including tasks that
require specific training and authorisations;
• Establish training program to meet the needs;
• Program must provide for Recognised Prior
Learning and Refresher Training
• Appoint competent persons for training and
assessing
Safety and Health Management System:
Mine Emergencies
• System must provide for mine emergencies and
include;
• Emergency exercises
• Aided and self rescue
• Involvement of;
– OCE for emergencies in and about surface excavation
– Deputy for emergencies involving ERZ
Safety and Health Management System:
Other Requirements
System must provide ;
• First Aid
• Fire fighting
• Safety and health communications
• Keeping bath rooms etc hygienic Emergency
exercises
Safety and Health Management System:
Other Risk Controls
System must provide ;
• Working near concealed services
• Trenching
• Working at heights
• Restricting access to hazardous areas
Safety and Health Management System:
Part 2: Standard Operation Procedures
Standard Operating Procedures are part of the
Safety Management System and are defined in
the Act as follows ;
A “Standard Operating System” is a documented
way of working or arranging facilities at the
coal mine developed after consultation with
coal mine workers
See next slide for definition of consultation
Safety and Health Management System:
Standard Operation Procedures & Consultation
Consultation is defined in the Act
“Consultation” with coal mine workers is a
discussion between the site senior executive or
supervisors with the affected coal mine workers
about a matter with the aim of reaching
agreement about the matter
Safety and Health Management System:
Standard Operation Procedures; comments
SOP’s not limited to those called up in legislation
If SOP is called up in legislation but the hazard is
not at the mine it is not required
Inspector under the powers provided in the Act
can require mine to review Safety and Health
Management System if he believes an SOP is
necessary for system to be effective
Regulations about Standard Operation
Procedures
• List of SOP’s must be at the mine
• Copy must be available and readily accessible
• List and procedures in format easy to
understand
Accidents and High Potential Incidents
Part 3 of Regs
• SSE must provide a report to inspector if
accident or incident of type listed in schedule of
regs
• Other accidents reported on approved form
• SOP required for publishing findings of
investigations
– implementing corrective action
– OCE and Deputy to be involved in developing SOP
if event in their area
Fitness for Work: Part 4 of Regulations
Coal mine must provide for persons at the mine to
recognise the safety and health risks associated
with
• Excessive consumption of alcohol
• improper use of drugs
• personal fatigue
• other physical or psychological impairment
Fitness for Work:Part 4 of Regulations:
Alcohol Consumption
• Offence to consume alcohol except in camp;
• Offence to carry out task under the influence;
• Safety and Health System must provide;
–
–
–
–
–
education
employee assistance
voluntary self testing
random testing
testing if any person reasonable suspects a person is
under the influence
Fitness for Work:Part 4 of Regulations:
Drug Consumption or Ingestion
Mine must provide:
– Education program
– Employee assistance program
• Obligation on:
– Person to report use of medication
– SSE to of notices given regarding medication
Hazardous Substances:
Part 5 of Regulations
Mine must provide:
• Register of hazardous substances at the mine
• Have available material data sheets
• Register and data sheets must be easily
accessible
• SOP for purchase, use, storage, movement etc
Recognised Standards:
Part 6 of Regulations; Part 5 of Act
Mine must provide:
• Current list easily accessible
• Copy of current standards easily accessible
• List and standards in an easily understood format
Mine Plans:
Part 8 of Regulations
Mine must provide:
• Survey plans
• Plan of site of serious accidents and high
potential incidents
• Mines rescue plan
• Plan of surface services
• Plan of high wall excavation
• Record of deformation of surface structures
Fixed and Mobile Equipment:
Part 10 of Regulations
Safety & Health Management system must
provide;
• Safe access
• Protective Structures
• Guarding
• Brake testing
• Seat belts
• Reversing alarms and pre-start warnings
Fixed and Mobile Equipment:
Further requirements
Safety & Health Management system must also
provide for;
• Periodic safety checks
• Pre-start checks
Fixed and Mobile Equipment:
Tagging and Isolation
Safety & Health Management system must also
provide for;
• Taking equipment out of service
• Returning equipment to service
• Isolating power sources
• Danger tags
Fixed and Mobile Equipment:
Using mobile equipment
Safety & Health Management system must
provide standard operating procedures for:
• Interaction of light and heavy vehicles
• Overtaking and parking
• Using equipment near electricity
• Discharging loads
Operator attended Dredges:
Safety & Health Management system must
provide;
• Stability checks
• Methods of measuring water levels in hulls
• Alarms for minimum free board
• Barriers and hand rails
Operator attended Dredges:
Operating & relocating
Safety & Health Management system must
provide standard operation procedures for;
• Safe access and control of plant hazards
• Checking and recording free board
• Controlling risk at the dredging face
• Managing hazards created by climatic changes
Personal Protective Equipment:
Part 10A of Regulations
Requirement for mine operator to provide:
• Sufficient and appropriate PPE
• Ensure equipment is readily available
• Training on maintenance and use
Work Environment:
Part 11 of Regulations; Safety Inspections
Requirement for mine health and safety
management system to provide standard
operating procedures for safety inspections to be
:
• Carried out before activity commences
• While activity is taking place
Work Environment
Bathrooms, toilets, dining facilities
Requirement for mine health and safety
management system to provide for:
• Sufficient potable water bath room facilities
• Clean and dirty areas
• SOP for maintaining in hygienic condition
Work Environment:
Dust exposure
Requirement for mine health and safety
management system to ensure mine workers do
not breath more than
• 3mg per cubic metre of respirable coal dust
during a period of 8 hours, and
• 0.1mg per cubic metre of respirable dust
containing free silica during a period of 8 hours
Work Environment:
Flammable and toxic gases;
( underground mines dealt with separately)
Requirement for mine health and safety
management system to provide SOP’s to:
• Identify and monitor possible hazardous
locations
• Determine exposure limits and develop controls
• Develop emergency procedures
Work Environment:
Noise limitations
Requirement for mine health and safety
management system to:
• To ensure that mine workers are not exposed to
excessive noise dosage
• Monitor and record noise levels
• Provide warning signs
Work Environment:
Other risks
Requirement for mine health and safety
management system to:
• Provide protection against lightening strikes
• Minimise risk from falling and slipping
Chapter 3:Surface Mines
Note definition
Chapter 3; Part 1:
Open Cut Examiner
• At least one OCE must be present at a surface
mine when mining activities are taking place in
an surface mine excavation
• OCE must be contactable by person working in
or around surface mine excavation
• Main responsibility of OCE is safety and health
of persons working in surface mine excavation
but can have other duties
Important Definition:
Surface Mine Excavation
Is defined in the Act, Schedule 3
“Surface mine excavation” means an area
where extraction operations are being
conducted and includes an area beyond the
main working face– in which shot holes are being charged; or
– being prepared for the extraction of coal
Another Important Definition:
Mining Activity
• Defined in regulations :
“Mining Activities” are activities that relate to
the winning of coal and include:
– preparing for extraction of coal or overburden
– preparing for and the firing of shots
– loading and transportation of overburden or
coal
– dumping of overburden on spoil heaps
Open Cut Examiner:
Duties and responsibilities
• Inspection of activities in and around
surface mine excavation including mining
activities;
• Before activities start
• Periodically
• Must read previous OCE report
• Acknowledge in mine record report read
Open Cut Examiner:
Obligation if unacceptable level of risk
If unacceptable level of risk detected OCE
must:
• Rectify if possible and inform any affected
persons
• Prevent exposure of others at the mine
• Inform supervisor and place in mine record
• Must inform supervisor before leaving site
Open Cut Examiner:
Other provisions relating to OCE
• Only person with at least equal competence
can give technical directions to an OCE
• OCE to be involved in developing
provisions in Safety and Health
Management Plan relating to Surface Mine
Excavation
Part 2: Person in charge of Electrical
Activities
When electricity is used at the mine the SSE
must appoint a suitably competent person to
control and manage the electrical
engineering activities at the mine.
• Required competencies are:
– Mine electricians certificate of competency;or
– Competency recognised by the Advisory
Council
Person in charge of Electrical Activities:
General duties
• Design, installation, maintenance of
electrical equipment
• Safe operation of electrical equipment
• Control of work and electrical activities
close to electrical installations
Part 3: Explosives
The mine safety and health management
system must provide for the use of
explosives including:
• Manufacturing, storing, transporting, using
• Accounting for explosives used
• Identifying deteriorated explosives
• Security of explosive
Part 3: Explosives: other requirements
Note: Explosive Act applies to Coal Mines
The mine safety and health management
system must provide for :
• Identify and controlling hazards associated
with the use of explosives
• Recovery and disposal of misfired explosives
• Records of misfired explosives
• Determination of allowable sleep times
Part 4:Ground Control
The mine safety and health management
system must provide for SOP’s to ensure
acceptable level of risk and include
inspection and monitoring:
• Spoil dumps and excavated faces
• Unstable hazardous or broken ground
Part 5: Highwall Mining:
Abnormal circumstance declaration
• A person must not enter a high wall mining
excavation unless a abnormal circumstance
declaration is in force
• Abnormal circumstance declaration is issued
by SSE stating requirements and conditions
and placed in mine record
• SSE must revoke as soon as possible
Part 5: Highwall Mining:
Operating Requirements
A mine safety and health management system
must provide SOP’s for:
• Persons entering surface mine excavation;
• fire fighting;
• Working in risk areas:
– Adjacent to highwall;
– Adjacent to highwall mining excavation;
• Communications;
• Monitoring atmosphere at cutting face
Part 6: Mine Roads
A mine safety and health management system
must provide for;
• Construction in according with regulations
• A specification for the construction of the
roads
• A SOP for maintaining and watering the roads
Part 7: Prohibited Articles
A mine safety and health management system
must provide for classifying materials or
objects as prohibited articles
Part 8: Stockpiles and Waste Dump
Operations
A mine safety and health management system must
provide for machines operating on stockpiles:
• Automatic shut down of engines
• Automatic fire suppression system
• SOP’s for safe operation on stockpiles
Part 8: Stockpiles and Waste Dump
Operations
A mine safety and health management system
must provide for:
• Fire detection and recovery in recovery
tunnels
• SOP’s for people working in and about
– tunnels, bins, below or near stockpiles
– areas liable to spontaneous combustion
• Safety berms when dumping over edges