Transcript C2 Topic 3

C2 Topic 1 and 2
C2.1 Mendeleev
• Mendeleev created the He arranged them by the
periodic table in 1871.
following properties:
• He arranged elements in
• Atomic mass
order of their
• Density
properties.
• Melting Point
• -groups = down.
• Formula of the oxide
• -period= across
Patterns emerged down
the groups and across the
• Metals are on the left
hand side of the
periods which confirmed
periodic table.
his predictions.
The group number
corresponds to the
number of
electrons in the
outer shell.
C2.2 Structure of the atom
Electron shells
• Atoms are made up of
PROTONS, NEUTRONS and
ELECTRONS.
• They are found in the positions
shown on the diagram.
• Atom is the smallest of particles.
Particle
Nucleus containing
protons and neutrons
Relative
Mass
Relative
Charge
Proton
1
+1
Neutron
1
0
Electron
1/1840
-1
Electrons fill shells from the middle in the order of
2, 8, 8, 18 (how many elements are in each period)
C2.3
The
Modern
Periodic
Table
• Top number – MASS NUMBER
The number of protons and neutrons
• Bottom number – ATOMIC NUMBER
The number of protons
(also the same as electrons)
27
Al
Protons = 13
Electrons = 13
Neutrons = 27-13 = 14
13
Protons and neutrons are packed together
tightly in the nucleus (high density)
Electrons are spread out in shells (low
density)
Isotope Elements with
the same
number of
protons and
electrons but
different number
of neutrons.
C2.4 Electron shells
• Electron located in the shell.
• Electronic configuration = how the electrons are
arranged in an atom.
C2.5 Ionic Bonding
• Ionic bonds form between METALS and NON-METALS.
• Ionic bonding involves the transfer of ELECTRONS.
• Metallic Ions are POSITIVELY charged (ANIONS).
• Non-metallic elements are NEGATIVELY charged
(CATIONS).
Loose
electron
+
Common Ions
Charged Particles.
To become
positively charged
an atom must lose
electrons. To
become negatively
charged and atom
must gain electrons.
C2.5 Ionic compounds- non metal and
a metal.
• Conduct electricity when MOLTEN (melted) and in an AQUEOUS SOLUTION
(dissolved in water)
• DO NOT conduct electricity as a SOLID
• Have high MELTING and BOILING points
• Usually SOLID at ROOM TEMPERATURE
Ion = an atom with a positive or negative charge.
Cations = metal atoms lose electrons to form positively charged ions called cations.
Anions = Non-metal atoms gain electrons to form negatively ions called anions.
Transferring electrons = ionic bonds.
Ionic compounds have a lattice structure, with a regular arrangement of ions, held
together by electrostatic forces between oppositely charged ions.
C2.6 Ionic compounds
• Ionic compounds contain ions.
Below are some of the common
ones.
Compound ions = contain
more than one element.
Names of ionic compounds =
If the compound contains
oxygen it ends with an –
ate…..eg….. Iron sulfate = Fe
SO4
If no oxygen then they end in
an –ide…….Iron Sulfide….FeS
C2.7 Properties of ionic
Compounds
• Solid = does not conduct electricity
• Liquid = conduct electricity…WHY….ions are free to
move around and they are charged.
• Melting points = when a substance changes from
solid to liquid.
• Boiling point = changes from a liquid to a gas.
• Ionic substances = high boiling points and high
melting points.
• Ionic bonds = strong and lots of them to break so
needs lots of energy.
C2.8
Solubility
Soluble = substance dissolves.
Insoluble = does not dissolve
Salt = Acid + alkali
Table explains which salts are soluble and which are not.
2.10 Precipitations.
silver nitrate (soluble) + sodium chloride (soluble) → silver chloride (insoluble) + sodium nitrate (soluble)
AgNO3 (aq) + NaCl (aq)→ AgCl (s) + NaNO3 (aq)
Precipitation
reaction - An
insoluble
solid formed
when two
soluble
substances
are mixed.
Barium sulfate is used as a ‘barium meal’ to x-ray
patients because it is
1. Opaque to x-rays
2. Safe to use
3. Insoluble so doesn’t enter the blood
C2.10 Precipitates
• Precipitates are SALTS that are formed in chemical reactions that DO NOT
DISSOLVE in the solvent used in the reaction.
C2.11 Ion Tests
• Ion tests for metals
(ANIONS) are usually done
by FLAME TESTS.
• Each ION produces a certain
flame colour.
Testing for CATIONS is done through
chemical testing.
1. Chloride – add nitric acid and silver
nitrate, if a white precipitate forms
then chloride ions are present.
2. Sulphate – add hydrochloric acid
and barium chloride, if a white
precipitate forms then sulphate ions
are present.
3. Carbonate – add an acid and if the
gas produced turns limewater MILKY
the carbonate ions were present.
(carbonate release carbon dioxide)
C2 Topic 3 & 4
C2.12 Covalent Compounds
Covalent bond is when a pair of electrons
are shared between two atoms forming a
molecule.
Learn these covalent molecules. Be able to
draw them using dot and cross diagrams.
Hydrogen Chloride HCl
Water H2O
Oxygen O2
Methane CH4
Carbon Dioxide CO2
Hydrogen H2
C2.13 Properties of Covalent
Substances
Simple Covalent Substances
Giant Covalent Substances
• Low melting point
• Low boiling point
• Poor conductor of
electricity
• High melting point
• High boiling point
Why?
• Because there are weak
forces between
molecules.
Why?
• Because there are
strong forces between
molecules.
2.13 Diamond vs. Graphite
Both examples
of giant
covalent
molecules.
Both made
from CARBON.
Diamond
Graphite
• Used to make cutting tools.
• Used to make electrodes and
lubricant.
• Very hard with strong bonds
between molecules.
• Does not conduct electricity
because there are no free
electrons.
• There are strong forces between
molecules within the layers – but
there are weak forces between
the layers.
• There is one free electron for
each carbon atom meaning it can
conduct electricity.
C2.15 Miscible or Immiscible?
Key definitions
Miscible – Liquids that completely mix to form a solution.
Immiscible – Liquids that do not form a solution but separate into two layers e.g.
oil and water.
Separating two immiscible liquids
Use a separating funnel.
1. Open the tap and let the lower liquid flow out and collect in a beaker.
2. Close the tap before the upper liquid starts to run out.
3. Change the beaker and then let the other liquid flow out.
Separating two miscible liquids
Use fractional distillation to separate liquid air to form nitrogen and oxygen.
Exploits the fact they have different boiling points.
1. Cool air to -200oC to liquefy it.
2. Warm up to -185oC to evaporate the nitrogen and keep the oxygen liquid.
C2.16 Chromatography
Used to separate mixtures of coloured compounds including inks, dyes and
colouring agents in food.
1. A spot of the mixture is placed near the bottom of a piece of chromatography
paper and the paper is then placed upright in a suitable solvent, e.g. water.
2. As the solvent soaks up the paper, it carries the mixtures with it.
3. Different components of the mixture will move at different rates.
4. This separates the mixture out.
Rf values
Different chromatograms and the separated components of the
mixtures can be identified by calculating the Rf value using the
equation:
Rf = distance moved by the compound ÷
distance moved by the solvent
The Rf value of a particular compound is always the same - if the
chromatography has been carried out in the same way. This
allows industry to use chromatography to identify compounds in
mixtures.
C2.17 Chemical Classification
Type of
bonding
Melting Point
Boiling Point
Solubility in
Water
Conductivity
Ionic
High
High
Most Dissolve
Conduct
electricity
when molten
or in solution,
not when solid
Simple
molecular
covalent
low
low
Some dissolve
in water
Do not
conduct
electricity
Giant
molecular
covalent
High
High
Insoluble
Do not
conduct
except
graphite
Metallic
High except
mercury
High except
mercury
Insoluble
Good
conductors
C2.14 Classifying Substances
Could you classify these substances based on their properties?
Know these examples!
Substance
Melting Point
Boiling Point
Electrical
Conductivity
Solubility in
water
Type of
Bonding
Sodium
Chloride
High
High
Yes in solution Soluble
or molten
IONIC
Magnesium
Sulfate
High
High
Yes in solution Soluble
or molten
IONIC
Hexane
Low
Low
No
Insoluble
SIMPLE
COVALENT
Paraffin
Low
Low
No
Insoluble
SIMPLE
COVALENT
Silicon dioxide High
High
No
Insoluble
GIANT
COVALENT
Copper
sulphate
High
High
Yes in solution Soluble
or molten
Sucrose
High
High
Soluble
IONIC
GIANT
COVALENT
C2.18 Metallic Bonding and
Transition Metals
The structure of metals – a regular
arrangement of positive ions
surrounded by a sea of delocalised
electrons.
Metals are malleable because ions can slide over each other if a large enough
force is applied. The electrons hold the ions together meaning the metal spreads
out rather than breaks.
Metals conduct electricity because the delocalised electrons are free to move. If a
voltage is applied, the electrons all move in the same direction and this is called a
current.
Most metals are transition metals and they typically have high melting points and
produce coloured compounds.
C2.19 Alkali Metals
Alkali metals are soft with relatively low
melting points.
Lithium, Sodium and Potassium react
with water to form hydroxides (which are
alkaline) and hydrogen gas.
Lithium + water  Lithium Hydroxide + Hydrogen
Sodium + water  Sodium Hydroxide + Hydrogen
Potassium + water  Potassium Hydroxide + Hydrogen
Alkali metals get more reactive as you move down
the groups because the atoms lower down have more
electron shells. This means the outer electron is
further away from the nucleus, not held in place as
strongly, and easier to lose – making it more reactive.
C2.20 Halogens
Halogen
Colour
State at room
temperature
Fluorine
Pale Yellow
Gas
Chlorine
Green/yellow
Gas
Bromine
Brown
Liquid
Iodine
Grey
Solid
Metal + Halogen  Metal Halide
Potassium + Bromine  Potassium Bromide
2K(s) + Br2(l)  2KBr2(S)
Calcium + Chlorine  Calcium Chloride
2Ca(s) + Cl2(l)  2KCl2(S)
They all follow
the same
pattern. Learn
them.
C2.21 Displacement of the
halogens
• Displacement reactions – a more reactive element
will displace (take the place of) a less reactive
element.
Potassium Bromide + Chlorine  Potassium Chloride
Potassium Chloride + Bromine  No reaction
Sodium Iodide + Chlorine  Potassium Chloride
Sodium Chloride + Iodine  No reaction
Chlorine is more
reactive than
bromine so will
displace the
bromine.
Chlorine is more
reactive than iodine
so will displace the
iodine.
C2.22 More halogen reactions
Halogens react with hydrogen to make hydrogen halides
which will dissolve in water to make acidic solutions.
Hydrogen + Fluorine  Hydrogen Fluoride
H2(g) + F2(g)  2HF(g)
Hydrogen + Chlorine  Hydrogen Chloride
H2(g) + Cl2(g)  2HCl(g)
Sodium
fluoride
Fluorine
Halogen
Displacement
reactions can
be used to
work out the
relative
reactivity of
halogens.
Salt
Sodium
chloride
Sodium
bromide
Sodium
iodide
Reaction
Reaction
Reaction
Reaction
Reaction
Chlorine
No
reaction
Bromine
No
reaction
No
reaction
Iodine
No
reaction
No
reaction
Reaction
No
reaction
C2.23 Noble gases
Noble gases are
chemically inert
(unreactive) because
they have a full outer
shell of electrons.
Discovery of Noble Gases
1. Chemists noticed the
density of nitrogen made
in a reaction was different
from that of nitrogen in
the air.
2. Chemists made a
hypothesis about the
composition of the air.
3. Chemists performed tests
to show the presence of
the Noble gases in the air.
Uses of Noble Gases
Reason
Xenon and Argon inside
filament lamps
To stop the hot filament
reacting with oxygen and
burning away
Argon and Helium used in
welding
To form a blanket over the
hot metal to stop it reacting
with oxygen in the air
Argon used in fire
extinguishing systems
It is non flammable and can
be used to fill a computer
server room (for example) if
a fire breaks out.
Helium used to fill balloons
and air ships
It has low density
Neon in fluorescent lamps
Produces a red light when
electric current is passed
through it under low
pressure
C2
Topic 5 Chemical Reactions
C2.24 and C2.25 Temperature
changes
Facts:
• During a chemical reaction there is usually a
transfer of energy between the reactant and
the surroundings.
Keywords
• Endothermic – reaction that takes heat energy in, decreasing the temperature of the reaction mixture
and its surroundings
• Exothermic – reaction that releases heat energy, increasing the temperature of the reaction mixture
and its surroundings
Endothermic
• Not many reactions are endothermic
• E.g.
Sodium hydrogen carbonate + Hydrochloric acid
Sodium Chloride + Water + Carbon dioxide
•
Other endothermic reactions include:
Making/breaking bonds
– Photosynthesis
• Energy needed to break bond
– Dissolving ammonium nitrate
• Energy released when bonds made
• Takes in heat energy
Exothermic
• Gives out heat
• Most reactions are exothermic
• Temperature increase
• All combustion reactions are exothermic
• E.g. Methane + Oxygen
• Explosions – release a lot of heat and gases very quickly
C2.26, 2.27 and 2.28 Rates of Reactions and Collision Theory
Keywords
Examples
• Rate of reaction – The speed at which a reaction takes place
• Fast reactions = Burning,
explosions
• Concentration – A measure of how much solute is dissolved in
a fixed volume of solvent.
• Surface area– The total area of all the surfaces of an object or
substance
• Slow reaction = Rusting, apple
browning
2. Temperature
• Higher temperature = faster reaction
e.g. And egg cooks faster in boiling water than warm water
• Particles have more energy = move faster
– More effective collisions (collide with more energy)
– Collide more frequently
Factors affecting Rate
1. Concentration
• More concentrated =
more particles
• More particles = more
collisions = faster reaction
3. Surface area (SA)
• Solid broken up into smaller pieces = larger SA
• Greater surface area = faster reaction
• More surface area = more particles on the surface
therefore more frequent collisions
• A = Smaller SA (block)
• B = Larger SA (powder)
C2.29 Catalysts
Keywords
• Catalyst – A substance that speeds up the rate of a reaction without being used
up in the reaction
• Catalytic converter – Device fitted to car exhausts with a thin layer of transition
metal catalyst on a honeycomb structure giving a large surface area.. The
catalyst speeds up the reaction to combine Carbon monoxide and unburned
petrol into carbon dioxide and water.
Catalysts
• Many chemical
processes use catalysts
to increase rate of
production of products
• Catalysts help to lower
the temperature and
pressure needed = less
energy needed = saves
money
Catalytic converters
• Reduce pollutants in exhaust gases
• Combine Carbon monoxide (CO) with oxygen
• Carbon dioxide and water released instead
• Contain transition metals (platinum, rhodium or palladium)
• Expensive metals so small amounts used
• Catalyst spread over a honeycomb structure = large Surface Area
• Works faster with the hot gases from the engine heat it up
B2
Topic 6 Quantitative Chemistry
C2.30 and 2.31 Relative Mass
RAM
• Compares mass to that of carbon 12
• E.g. Hydrogen is 12X lighter that
carbon
RFM
• Sum of all masses in the formula
• E.g.
EF
• Simplest whole number ratio of
atoms/ions
• E.g. H2O there are double the number
of hydrogens to oxygen
Keywords
• Relative Atomic mass (RAM) – The
mean mass of an atom relative to the
mass of an atom of carbon-12, which
has a mass of 12.
• Empirical formula (EF) – The simplest
whole number ration of atoms of each
element in a compound
• Molecular formula (MF) - The actual of
atoms of each element that combine to
make a molecule of a compound.
• Relative formula mass (RFM)– The sum
of the relative atomic masses of all the
atoms in a formula
B2.32 Percentage
composition
Percentage by
mass of an element
in a compound
=
• No atoms are lost or
made in a chemical
reaction.
• They are rearranged into
new substances
• You can use relative mass
and balanced equations
to calculate the mass of a
reactant or product.
Number of
atoms of
element
X
A
M
X
100
Keywords
C2.33 Yields
Yield – the amount of useful product obtained from a
reaction.
Products need to be make as cheaply as possible. Chemists need to make sure the
reaction creates as much product as possible.
Theoretical Yield
1. Maximum calculated amount of a product that could be formed from a given
amount of reactants.
2. Can be calculated from the balanced equation
3. Assumes all reactant are turned into products and all products harvested
Actual Yield
1. The actual amount of product obtained from a chemical reaction.
Percentage Yield
1. The actual yield divided by the theoretical yield as a percentage
Yield usually less than expected – 3 reasons:
1.
Reaction may be incomplete
2.
Some product is lost
C2.34 Waste and Profit
Keywords
• By-products – Any product formed in a reaction in
addition to the required product
• Waste products – By-products that have no uses
Disposal of Waste Products
• Industry make many useful substances (cement, pesticides, plastics)
• Many of the reactions make waste products:
 Not useful
 Must be disposed of following strict laws
 Expensive to dispose
 Can cause environmental problems
 Can cause social problems (house prices drop or unpleasant smells)
Cost Effective Process
• All factories must consider environmental impacts including disposal of waste.
• Companies want the most profit
• Reactions need to be
• High in percentage yield
• All products are useful so there are no waste products (or uses found for waste
products – econimically viable)
• Reactions are fast (quick to make lots of product)