Transcript PowerPoint プレゼンテーション

WT30 Wireless SS Terminal
Wireless SS Terminals
WT30 Product Explanation
1
Concept
•
Target application
– Mainly: Remote supervisory of equipment operation at FA.
– Sub.: Movement such as forklift
•
Selling point
– Globalization correspondence
• Export is available by acquisition each radio standard of Japan, the
U.S., Europe, and China.
– One component with wireless and I/O terminals
• Reduce space, reduce man-hours, reduce cost.
– The small size for the installation in a control box
• It is 90mm in height and DIN rail attachment.
– Wiping out of wireless anxiety
• The radio interference can be prevented by the antenna series and many
frequency channels.
• Monitoring the receiving radio power level by the L.E.D.
– Reduction of system cost (systems development, installation, maintenance
cost)
2
Target Applications: The supervisor system in factory
The best ON/OFF data collection wireless system for the FA site.
2) RS232C Master –
Wireless Slave I/O
1) DeviceNet Master Wireless Slave I/O
OC PLC
PC
OR
OC（CS1、CJ1）PLC
ＤｅｖｉｃｅＮｅｔ
RS232C
アンテナコネクタ
(SMA)
WT30-M01
OMRON
WD30－M
WIRELESS UNIT
WD30-ME
MS NS WS
88
Serial Master
WT30
WT30
Slave
Slave
Up to 64 slaves
Up to 64 slaves
3
For Global
Available to use in Japan, Europe, U.S.A. and China.
[Applicable Standards]
Area
Standards
Japan
ARIB STD-T66
U.S.A.
FCC part15.247
Europe
EN 300 440-2
China
4
Wireless Slave has the I/O interface.
We offer the 3 types of Wireless Slaves.
1) 16 Input pts.
2) 8 input and 8 output pts. With NPN/PNP
[Pin Assign]
WD30-SMD16 (IN16 pts.)
+V
0V
IN
(OUT) (OUT) 00
DC
24V
DC
0V
IN
08
IN
01
IN
02
IN
09
IN
10
IN
03
IN
11
COM IN
(IN) 04
IN
05
IN
06
IN
07
COM ERR
(IN) (P)
COM IN
(IN) 12
IN
13
IN
14
IN
15
COM ERR
(IN) (N)
IN
06
IN
07
COM ERR
(IN) (P)
WD30-SMD16(IN8 pts. OUT8 pts. (NPN))
WD30-SMD16-1(IN8 pts. OUT8pts (PNP))
+V
0V
IN
(OUT) (OUT) 00
DC
24V
DC
0V
IN
01
IN
02
IN
03
COM IN
(IN) 04
OUT OUT OUT OUT COM OUT
00
01
02
03 (OUT) 04
IN
05
OUT OUT OUT COM ERR
05
06
07 (OUT) (N)
Note) COM(OUT) is connected to +V(OUT) internally at NPN type.
COM(OUT) is connecter to 0V(OUT) internally at PNP type.
5
Design for FA use
Installation in control box with small size and DIN rail attachment.
105mm
90mm
40mm
Furniture for DIN rail
6
Function: Easy setting
System registration
System registration can be done by setting SW only.
Tool Software is not required.
System registration can be done by setting SW only.
1) Scan list Valid / Invalid: The registration for slave entry.
2) The registration of serial No. Valid / Invalid:
This function is for preventing from miss-communication with the other
wireless group. It's done by the registration the serial No.
Easy setting
[Scan list: Invalid]
There is no entry and registration. You only set the rotary SW
for the number of slaves. This mode is easy to setting include
exchanging the unit. But this mode has low security.
[Scan list: Valid Serial No. registration: Invalid]
Scan list is automatically created by the setting of the rotary SW
for the number of slaves. You need to re-set in case of changing the
composition with in I/O size change.
[Scan list: Valid Serial No. registration: Valid]
Scan list is automatically created by the setting of the rotary SW
for the number of slaves. You have to re-set to exchange the slaves,
even if the same type of slave. But this mode has high security.
High security
7
Function：The display by L.E.D.
You can confirm the R.S.S.I. in L.E.D.
You can do the trouble shooting easily with the L.E.D.s.
The WT30 shows the status in L.E.D.s.
WS：The Status of the Wireless Communication MS：The Status of the Wireless Unit
ERROR［Slave］：The alarm of wireless communication error I/O LEDs［Slave］：The Status of I/O
Serial Com. LED［Serial Master］：The status of Serial communication
Received Signal Strength Indicator
(RSSI) LED
Stability
Instability
Caution
Display at the 9 levels
ERROR[Slave]：The output signal that shows the
wireless communication is instability.
8
Function：Free from Interferences
The construction of more wireless systems becomes possible.
The frequency that can be set is doubled from current model,WD30.
So that, the interferences such as intermodulation are decreased.
ｃｈ
Center Freq.[MHz}
1
2
3
4
5
6
7
8
9
10
2401.0
2402.2
2403.4
2404.6
2405.8
2407.0
2408.2
2409.4
2410.6
2411.8
2413.0
2414.2
2415.4
2416.6
2417.8
2419.0
2420.2
2421.4
2422.6
Range of Freq.[MHz]
2400.0
2401.2
2402.4
2403.6
2404.8
2406.0
2407.2
2408.4
2409.6
2410.8
2412.0
2413.2
2414.4
2415.6
2416.8
2418.0
2419.2
2420.4
2421.6
～2402.0
～2403.2
～2404.4
～2405.6
～2406.8
～2408.0
～2409.2
～2410.4
～2411.6
～2412.8
～2414.0
～2415.2
～2416.4
～2417.6
～2418.8
～2420.0
～2421.2
～2422.4
～2423.6
New added CH
Current CH
(WD30)
2402.2
#1（2401)
2404.6
#2（2403.4)
2407.0
#3（2405.8)
Current Max34CH → Max67CH
The decrease of intermodulation
5CH <-- the
intermodulation wave
1CH
3CH
5.5CH
9
Function：M.C.A.
A steady communication is realized by MCA.
This avoids the obstruction wave automatically.
In case of the frequency SW is set “00”,
the MCA, Multi Channel access,
function is available. The wireless units
automatically select the good
Rotary SW=00 frequency channel from 2ch,11ch and
21ch when the wireless communication
is interfered.
The obstruction wave
2ch
11ch
21ch
Note 1) M.C.A. function is effective for a single system.
Please do not use this function at the two or more system installation.
Note 2) The frequency channel under the communication can be confirmed with LED.
10
Function：Relay function
One slave unit can be used as a repeater.
The communication area can be expanded.
PC
RS232C
○
Serial Master
×
Wireless slave can be used
as a repeater by setting SW.
○
Repeater
Note1) Becoming the repeater, the slave can't handle the I/O signal.
(I/O terminal of repeater does NOT work.)
Note 2) If the slave is in the area where wireless master can communicate,
the slave connect directly to the wireless master.
Note 3) Repeater function works without M.C.A. function.
You can NOT use both repeater function and M.C.A. function.
Slave
11
System configuration
-- Serial master WT30-M01 -WT30
(Serial Master)
- I/O of the repeater
does NOT work.
- WD30-SE/-SE01 can NOT
connect to WT30 Serial Master.
WT30
(Slave)
WT30
Slave
(Repeater)
WT30
Slave
(Repeater)
WT30
(Slave)
WD30-SE
- Repeater can be exist
only 1 unit in the system.
WT30
(Slave)
WT30
(Slave)
WT30
(Slave)
WT30
(Slave)
-The number of the wireless slaves is up to 64
including the number of connected slaves via repeater
12
System configuration
-- Wireless DeviceNet Master, WD30-ME/-ME01 -WD30-ME
(Wireless Master)
-WT30 can NOT connect as a repeater.
WT30
(Slave)
WD30-SE
(Slave)
WD30-SE
(Repeater 1)
WT30
(Slave)
WD30-SE
(Slave)
WD30-SE
(Repeater 2)
WD30-SE
(Repeater 1)
WT30 Slave
(Repeater)
WT30
(Slave)
WT30
(Slave)
WD30-SE
(Slave)
WD30-SE
(Repeater 3)
WT30
(Slave)
WD30-SE
(Slave)
- Repeater is up to 3 steps
WD30-SE
(Slave)
- The number of slaves is up to 64 including the repeater
- The number of slaves are limited by the total I/O size of slave's.
13
Function：Roaming -- Serial master WT30-M01 -The Serial master automatically changes the communication
route by using 1 repeater.
PC
Serial Master
The frequency
channel is used in the
same one.
Repeater
(Only 1 unit in a system)
RS232C
2) The communication route
is automatically changed!
1) If the wireless communication
becomes instability, ….
3) Wireless master tries to find
the slave via the repeater.
Move
14
Serial Communication on CompoWay/F
Using CompoWay/F, you can monitor the condition
of wireless system.
PC
RS232C
WT30-M01
Serial
Master
- Addition information
- Input signal at slave
- The status of wireless slaves
- The number of times on communication
error
-The R.S.S.I of the repeater or the slave
connected to the master directly.
- The frequency channel
- The cycle time of wireless
communication
- The route infomaition
- Out put signal at slave
- The I/O size of slave
- The R.S.S.I of each frequency channel
The result of the radio monitoring in
all frequency channels
15
Antenna Series
A suitable antenna for installation features can be selected.
The interference reduction is possible by the directional antenna.
3 types of antennas
1/2λ antenna
gain： up to 2.14dBi
Direction: omunidirectional
Connector: SMA-P(reverse)
Cable: No
Wave polarization: vertical
Impedance: 50Ω
1/2λ antenna
gain： up to 2.14dBi
Direction: omunidirectional
Connector: SMA-P(reverse)
Cable: 2m coaxial cable
Wave polarization: vertical
Impedance: 50Ω
Others: Magnet based
1/2λ planar antenna
gain： up to 2.14dBi
Direction: +60°-60°
Connector: SMA-P(reverse)
Cable: 2m coaxial cable
Wave polarization:vertical horizontal
Impedance: 50Ω
16
Product Series
[Wireless Units]
Type (tentative)
Master /
Slave
Interface
Connector
WT30-M01-FLK
Serial
master
RS-232C
D-sub 9 pin (Inch screw)
WT30-SID16
I/O slave
DC input 16 pts. (NPN,PNP Commonness)
Screw less
WT30-SMD16
DC input 8 pts. (NPN,PNP Commonness)
+Transistor output 8 pts. (NPN)
WT30-SMD16-1
DC input 8 pts. (NPN,PNP Commonness)
+Transistor output 8 pts. (PNP)
Note The antenna is not attached to the wireless units.
[Option]
Type (tentative)
Contents
WT30-AT001
Magnet based antennas ( 2 peaces)
WT30-AT002
Planar diversity antenna
WT30-AT003
Pencil type antennas ( 2 peaces)
WT30-FT001
Furniture for TH35-7.5
WT30-FT002
Furniture for TH35-15
WT30-FT003
Furniture for surface mount
WT30-FT011
Furniture for the Planar diversity antenna with magnet
WT30-CA2M
Extension cable for antenna (2m)
17
Specifications
[General specifications]
Item
Power supply
I/O Power
supply
(for I/O circuit)
Serial Master
Rated voltage
DC24V
Range of permissible
voltage
DC20.4 to 26.4V
Rated voltage
DC24V
Range of permissible
voltage
DC20.4 to 26.4V
Ambient operating temperature
Input 16 pts. ON: -10 to +50 ℃
Input 10 pts. ON: -10 to +55 ℃
Ambient operating humidity
25 to 85% (with no condensation)
使用温度雰囲気
腐食性ｶﾞｽのないこと
Ambient storage temperature
-25 to 65℃
Protective construction
IP30
端子構造
電源：ｽｸﾘｭｰﾚｽ端子台
(ﾌｪﾆｯｸｽｺﾝﾀｸﾄ製FFKDS/V15.08または相当品)
ｼﾘｱﾙ：Dｻﾌﾞ9ﾋﾟﾝ(ﾒｽ),ｲﾝﾁﾈｼﾞﾀｲﾌﾟ
(ｵﾑﾛﾝ XM2F-0910-132または
相当品)
I/O Slave
ｽｸﾘｭｰﾚｽ端子台
(ﾌｪﾆｯｸｽｺﾝﾀｸﾄ製FFKDS/V1-5.08また
は相当品)
18
Specifications
[Wireless interface specifications]
Item
Specifications
Electromagnetic waveform
Spread spectrum (direct sequence: DS-SS)
Communications method
Simplex (half-duplex) operation
Frequency band
2400 to 2483.5MHz
Number of channels
67 (using frequency division)
Antenna power
10mW
Wireless interval data transfer velocity
100kbps
Repeater function
Serial Master: 1 repeater is available with I/O slave
WD30-ME: 3 repeaters are available with WD30-SEs
同一ｴﾘｱ使用システム数
Min 10 systems
Maximum number of connectable
Wireless Slaves
64 slaves max.
[Applicable Standards]
Area
Standards
Japan
ARIB STD-T66
U.S.A.
FCC part15.247
Europe
EN 300 440-2
China
19
ＥＮＤ
20