Transcript Training - University of Stavanger
1. Introduction
PETE 411 - Well Drilling
Lesson 1 Introduction
by Dr. M. Amani
TAMU-Petroleum Engineering
FALL, 2003 Pete 411 Well Drilling Slide 1 of 16
1. Introduction
Lesson 1 - Introduction
Texts
Grading
Syllabus (attached and on internet)
Class Objectives (attached and on internet)
Schedule
Corrections to Textbook (on internet)
http://pumpjack.tamu.edu/~juvkam-wold/
MOVIE
The Rotary Drilling Rig
Pete 411 Well Drilling Slide 2 of 16
General Information
1. Introduction
Prerequisites:
PETE 320, 321, 322, 323 and 324
3 credit hours
Class Schedule:
Section 501: MWF 9:10 - 10:00 Section 502: MWF 11:30-12:20
Class Room:
Rich Room 313
Pete 411 Well Drilling Slide 3 of 16
General Information
1. Introduction
Instructor:
Dr. M. Amani
Office:
Office Hours:
Room 401 K MWF 10:00 – 11:00
Phone:
–
MW 12:30 - 2 p.m
or by appointment 845-6164
Pete 411 Well Drilling Slide 4 of 16
1. Introduction
Textbook
Applied Drilling Engineering,
by Adam T. Bourgoyne Jr., Martin E. Chenevert, Keith K. Millheim and F.S. Young Jr., Society of Petroleum Engineers, Richardson, TX, 1991.
Available from the bookstore or directly from SPE Pete 411 Well Drilling Slide 5 of 16
Basis for Grading
1. Introduction
Homework
Weekly Quizzes Quiz A Quiz B Design Project FINAL 10% 10% 20% 20% 10% 30% 100%
Pete 411 Well Drilling Slide 6 of 16
Homework Assignment:
Read:
Applied Drilling Engineering, Ch.1, pp 1-12 HW #1, due Monday, Sept. 8 (internet)
Class Lectures are on the Internet
PETE 411 – Lessons 1 & 2
http://pumpjack.tamu.edu/~amani/
1. Introduction Pete 411 Well Drilling Slide 7 of 16
1. Introduction
PETE 411 Catalog Description
The design and evaluation of well drilling systems; identification and solution of drilling problems; wellbore hydraulics; casing design; well cementing; drilling of directional and horizontal wells; wellbore surveying.
Pete 411 Well Drilling Slide 8 of 16
Schedule - Fall, 2002
WEEK NO.
TOPICS
1. Introduction, the Rotary Drilling Process, The Rig, Drilling Equipment 2. Drilling Cost & Drilling Rate, Hole Problems, Drilling Structures 3. Drilling Bits, Drilling Hydraulics - Hydrostatics 4. Rheological Models, Pressure Losses in Laminar Flow, Slot Flow
1. Introduction Pete 411 Well Drilling Slide 9 of 16
Schedule - cont’d
WEEK NO.
TOPICS
5. Oct. 6 & 8: no classes; SPE Fall Mtng.
Surge and Swab Pressures cont’d 6. Pressure across Bit, Bit Nozzle Sizing, Surge and Swab Pressures 7. Lifting Capacity of Drilling Fluids, Casing Design Procedures, Burst, Collapse, Tension
1. Introduction Pete 411 Well Drilling Slide 10 of 16
Schedule - cont’d
WEEK NO.
TOPICS
1. Introduction
8. Casing Design, API Performance Properties, Examples, Drilling Technology - Abnormal Pore Pressure Detection 9. Drilling Technology - Balanced and Overbalanced Drilling, Fracture Gradient Prediction, Gas Cut Mud, “d c exponent”
Pete 411 Well Drilling Slide 11 of 16
Schedule - cont’d
WEEK NO.
TOPICS
10. Well Control Methods, Kick Detection and Procedures for Killing Wells, Wireline Logging, MWD 11. Cements and Cementing, Primary & Secondary Cementing Squeeze Operations
1. Introduction Pete 411 Well Drilling Slide 12 of 16
Schedule - cont’d
WEEK NO.
TOPICS
1. Introduction
12. Cementing Equipment, Additives, Liner Cementing, Setting Cement Plugs 13. Directional Drilling, Well Trajectory Surveying, Horizontal Drilling
Pete 411 Well Drilling Slide 13 of 16
Schedule - cont’d
1. Introduction
WEEK NO.
TOPICS
14. Torque & Drag Calculations, Coiled Tubing, Slimhole Drilling 15. Problem Solving, Review, Finals
Pete 411 Well Drilling Slide 14 of 16
1. Introduction
Important Dates
QUIZ A
- Monday, Oct. 13, 7-9 p.m.
QUIZ B
- Monday, Nov. 10, 7-9 p.m
QUIZ A & B: Rich 101
Design Projects Due:
- Monday, Dec. 8, 5 p.m. (Rich 401K)
FINALS Rich 313
- Sec. 501: Mon., Dec. 15, 8-10 a.m.
- Sec. 502: Wed., Dec. 17, 10:30-12:30
Pete 411 Well Drilling Slide 15 of 16
PETE 411 - Texas A&M
1. Introduction
END Lesson 1
And now, the movie...
Pete 411 Well Drilling Slide 16 of 16