Transcript Installation of Components (Prerequisites)

OmniPro-Accept 7
Installation and Activation
procedures
The following presentation will describe the
OmniPro-Accept 7 software licensing procedure.
The concept might also be applicable for other
software from IBA Dosimetry in case that the
product registration and licensing is performed
via the HASP service.
Contents
1)
2)
3)
4)
5)
Review of System Requirements
Installation of Components (Prerequisites)
Installation of OmniPro-Accept 7
Online License Activation
Manual License Activation
1) Review of System Requirements
Review of System Requirements
 First of all, insert the
OmniPro-Accept 7 CDROM into an appropriate
drive at your computer.
 The auto run process
will start and open the
install shield in your
standard internet
explorer, e.g. Windows
Internet Explorer.
 The Welcome screen
provides information
regarding the icons on
the left side. It is
recommended to review
the Requirements and
Learning prior to
performing the
Installation.
Review of System Requirements
 Ensure that your
computer meets the
System Requirements
before you continue with
the installation of
OmniPro-Accept.
 In addition, before you
continue, ensure yourself
that you have full
administration rights
on the computer and
disable any firewall
and virus scanner
software until you have
completed the
installation, registration
and equipment setup.
Review of System Requirements
 The Documents icon will
link you to electronic
copies of the RTPS
interface user guides and
operating manuals.
 It might be a good idea
to have a look to the
Readme document to
learn more about the
OmniPro-Accept
software requirements
and modification history
as well as known effects.
Review of System Requirements
The Readme document
provides information
regarding:
 the Operating system
 the Installation of the
software
 the License Activation
 the used Coordinate
System
 and other details in
context with this version
Please ensure yourself that your operating system meets one of these requirements.
OmniPro-Accept must not be installed on a virtual computer, network server or
RAID hard drive configuration.
2) Installation of Components (Prerequisites)
Installation of Components (Prerequisites)
After reading the
Requirements and other
information you can start
to run the Installation by
clicking the
corresponding button in
the menu bar.
Depending on operating
system and internet
explorer etc, the following
scenario might appear.
Click the Run button to
continue.
Again, click the Run button
to continue.
Installation of Components (Prerequisites)
 Then the OmniPro-Accept 7 Setup and prerequisites wizard is
starting.
 Before you continue by clicking Next, please read attentively all
information provided in the window.
Installation of Components (Prerequisites)
Please do not uncheck /
skip the installation of
these components.
They are required by
OmniPro-Accept in order to
run properly.
 The prerequisites wizard is detecting automatically which component is
already installed on the computer and does meet the requirements.
 Missing components are automatically selected and get a check-mark.
They will be installed after clicking the Next button.
 Depending on which component need to be installed, you might be
requested to accept license agreements from third parties.
Installation of Components (Prerequisites)
 In this example, the Visual C++ componente will be installed at first.
 Then the HASP software installation is prepared. This will take some time
and we ask for your patience.
 You will get it prompted when done successfully.
Installation of Components (Prerequisites)
If you do not accept the
agreement, the DirectX
components will not be
installed and the OmniProAccept software will not
work properly.
 In the next step, the software installer prepares the DirectX installation.
 Please read the software license terms, you need to accept the agreement
to continue the installation.
Installation of Components (Prerequisites)
 After confirmation of the license agreement, the installation wizards starts.
 Continue by pushing the Next button.
Installation of Components (Prerequisites)
 It is now possible to monitor the installation process in the status bar.
 Please show patience until the installation process will be displayed in the
status bar – it will take some time. Click the Next button on request.
Installation of Components (Prerequisites)
 When all required components have been installed, click Finish.
Installation of Components (Prerequisites)
 Finally, when all components have been installed, check if the HASP License
Manager is starting automatically.
 Use the Windows ‘Search’ function to find the Services and open it.
 You will find the HASP License Manager as well the Status and Startup Type
under local services.
Installation of Components (Prerequisites)
 With the right mouse click open the HASP License Manager Properties.
 Select the Startup Type ‘Automatic’ in the General settings, and
 Under Recovery, select ‘Restart the Service’ in First failure situation.
3) Installation of OmniPro-Accept 7
Installation of OmniPro-Accept 7
 After pushing the Finish button, the OmniPro-Accept 7 installation is
being prepared. Click Next to start the installation.
 The program will propose an installation folder for OmniPro-Accept. If
necessary, you can choose a different location. Click Next to continue.
Please note:
Do not define a folder somewhere on a server or network path or virtual
computer. The program folder must be located locally on your PC.
Installation of OmniPro-Accept 7
 Push the Install button to start
the installation process.
 Until it starts and the progress
can be monitored in the status
bar, a few seconds of patience
are required.
 Follow the further instructions
and push the Finish button at
the end to exit the setup wizard.
4) Online License Activation
Online License Activation
The internet explorer can be closed now.
On the desktop, double-click the OmniPro-Accept 7 icon to start the application.
Online License Activation
 In the menu bar, click Help and
open the drop-down menu.
 Select About to open the
information window of OmniProAccept.
 In this window, respectively into
the text box Product Key, the
license number code need to be
entered.
Online License Activation
 The required Product Key is
given with the software license
document you received together
with the installation CD.
 By default, the product key can
be used for five installations.
Online License Activation
Important notice:
To get unlimited access to all
features you ordered, please
register / activate your
software as soon as possible,
but latest within 30 days.
The fastest way to register and
activate the software is the
online activation, provided you
have a connection to the
internet.
In this case click the Activate
button. The OmniPro-Accept
software will then connect to the
HASP server for the activation.
Online License Activation
 An information appears
when the activation was
done successful; click OK.
 After the registration the
software will be restarted
automatically; click OK.
Important notice:
An internet connection
via Proxy-Server can
cause restrictions and
the activation may fail.
Online License Activation
After the restart of OmniPro-Accept, you can compare the features
enabled in the OmniPro-Accept software with the options marked in the
associated OmniPro-Accept software license document.
5) Manual License Activation
Manual License Activation
How can I perform the
software activation when my
computer does not have
access to the internet?
Manual License Activation
Alternatively, if no internet connection can be established, the software need to
be activated in the following way:
Do not change the file name,
format or content of the c2v file.
This will cause the licensing
procedure to fail.
 After entering the product
key, click the c2v button in
order to generate a so-called
c2v (customer to vendor) file.
It contains your licensing
information.
 In case you install OmniProAccept on more than one
computer, you generate a
c2v file on each of the
computers.
 Save the c2v file locally and
send it by email to
[email protected],
including a screenshot of the
About window and your
complete address details.
Manual License Activation
After sending the c2v file(s) to
[email protected],
you receive corresponding
v2c file(s).
 Save the file(s) locally.
Start the OmniPro-Accept
software and open the
About window.
 Click the v2c button in
order to import the
activation information into
the OmniPro-Accept
software.
Manual License Activation
I discover
which v2c
IHow
havecan
installed
the software
belongscomputer
to which and
c2v file
onfile
different
(i.e., to
created
forwhich
each computer)?
installation a
c2v file.
Manual License Activation
Open the folder where the c2v
and v2c files are saved and
open them with Notepad.
In the c2v file you can find
the HASP-ID within the first
lines.
The v2c file you received must
contain the same HASP-ID.
Manual License Activation
These HASP-ID‘s must be identical with
the HASP-ID that is displayed in the
About window of OmniPro-Accept 7.
Note: Only c2v and v2c
files with the same HASPID are belonging together.
Manual License Activation
When the HASP-ID‘s in the v2c file and
About window are identical, then
move your mouse pointer to the v2c
button and click it.
Select the corresponding v2c file from
the folder where you have saved it
and click Open.
After this, the License Activation
window will appear.
And finally you will get the information
that the OmniPro-Accept software
need to be restarted make the
activation effective - click OK.
Manual License Activation
The following scenario is showing
potential error messages when
performing the v2c import:
 Should you have selected a wrong
v2c file, the software will respond
with an error message.
 In case that you use the v2c file a
second time, the following message
will appear to inform you.
Manual License Activation
When OmniPro-Accept has restarted you can see the activated features in the
About window. You can compare them with the options provided with the
OmniPro-Accept software license document.
Last, but not least…
Some notes at the end of this presentation:
 In case that you need to add or change features / options, please talk
with your local IBA Dosimetry representative or send an e-mail to
[email protected].
 When you have received a new Product Key for additional or
modified features/options, you need to enter it into the corresponding
field of the About window and perform an Activation in the way as
described before.
 Please observe the computer requirements and follow the installation
procedure exactly as described here.
 In case of unexpected problems please send a detailed report
including screenshots of error messages, computer specifications
and other information that you think could be helpful to your IBA
Dosimetry representative or directly to [email protected].
Please activate the software as soon as possible –
the initial license expires after 30 days.
Thank you!