Transcript No Slide Title

Chapter 2
How Computers
Work
IT Essentials: PC Hardware and Software
1
Basic Functions of an Operating Systems
•Input – Recognizing input from the keyboard or mouse.
•Processing –- Manipulating data according to the user's
instructions.
•Output – Sending output to the video screen or printer.
•Storage – Keeping track of files for use later. Examples of
storage devices include floppy disks and hard drives.
IT Essentials: PC Hardware and Software
2
Bootstrap
•For an operating system to run, it must be loaded into the
computer's Random Access Memory (RAM).
•When a computer is first turned on, it launches a small program
called the bootstrap loader that is built into the computer's
hardware.
•Specifically, the bootstrap is located on the BIOS chip, which
resides on the system board.
•The bootstrap's primary functions are to test the computer's
hardware and to locate and load the operating system into RAM.
IT Essentials: PC Hardware and Software
3
Power-On Self Test
•To test the computer's hardware, the bootstrap program runs a
program called power-on self-test or POST. In this test, the computer's
Central Processing Unit (CPU) checks itself first and then checks the
computer's system timer. The POST checks the Random Access
Memory (RAM) by writing data to each RAM chip and then reading that
data. Any difference indicates a problem.
•If the POST finds errors, it sends a message to the computer monitor. If
the POST finds errors that cannot be displayed on the monitor, it sends
errors in the form of "beeps."
•The POST sends one beep and the screen begins to display OS
loading messages once the bootstrap has determined that the computer
has passed the POST.
IT Essentials: PC Hardware and Software
4
Motherboards
•Knowledge of the motherboard, also called the system board
or main board, is crucial because it is the nerve center of the
computer system. Everything else in the system plugs into it, is
controlled by it, and depends on it to communicate with other
devices on the system.
•It generally houses the CPU, the controller circuitry, the bus,
RAM, expansion slots for additional boards, and ports for
external devices. In addition, it contains the CMOS and other
ROM BIOS and support chips providing varied functionality.
IT Essentials: PC Hardware and Software
5
Motherboard Form Factors
•Motherboards are usually described by their form factors, which
describe their physical dimensions. The two most common form
factors in use today are the Baby AT motherboard and the ATX
motherboard.
•The ATX motherboard is similar to the Baby AT motherboard,
except for a number of important enhancements. Most new
systems come with the ATX motherboard form factor.
IT Essentials: PC Hardware and Software
6
Motherboard Components
•The major components on the motherboard include the chipset,
CPU socket, expansion sockets, I/O support, BIOS, RAM
sockets, power supply socket, CMOS chip, dipswitches and
jumpers, and the memory cache.
IT Essentials: PC Hardware and Software
7
Central Processing Unit
•The CPU is one of the most important elements of the personal
computer.
•On the motherboard, the CPU is contained on a single
integrated circuit called the microprocessor.
•The computer will not run without a CPU.
•Often referred to as the brains of a computer, the CPU contains
two basic components:
•Control unit
•Arithmetic/Logic Unit (ALU)
IT Essentials: PC Hardware and Software
8
Control Unit
•Instructs the rest of the computer system on how to follow a
program's instructions.
•It directs the movement of data to and from processor memory.
•The control unit temporarily holds data, instructions, and
processed information in its arithmetic/logic unit.
•In addition, it directs control signals between the CPU and
external devices such as hard disks, main memory, I/O ports, etc.
IT Essentials: PC Hardware and Software
9
Processor Speed
•CPU descriptions as Pentium 133, Pentium 166, or Pentium 200
are well known. These numbers are specifications that indicate
the maximum (reliable) operating speed at which the CPU can
execute instructions.
•The CPU speed is not controlled by the microprocessor itself,
but by an external clock located on the motherboard.
•The speed of the processor is determined by the frequency of
the clock signal. It is typically expressed in megahertz (MHz),
and the higher the number, the faster the processor.
IT Essentials: PC Hardware and Software
10
Expansion Slots
•Expansion slots, also known as sockets, are receptacles on the
computer motherboard that accept printed circuit boards.
•All computers have expansion slots that allow additional devices to be
added.
•Video cards, I/O cards, and sound cards are examples of components
that are located in expansion slots.
•The common expansion slots that are likely to be encountered include
the following:
•Industry Standard Architecture (ISA )
•Peripheral Component Interconnect (PCI )
•Accelerated Graphics Port (AGP)
IT Essentials: PC Hardware and Software
11
Monitors
•Computers are usually connected to a display, also called a
monitor.
•Some key monitor-related terms are: pixels, refresh rate,
resolution, and size.
•Pixels – Are picture elements. The screen image is made of pixels
(tiny dots), which are arranged in rows across the screen. Each
pixel consists of three colors: red, green, and blue (RGB).
•Dot pitch – A measurement of how close together the phosphor
dots are on the screen. The finer the dot pitch, the better image
quality (measured in millimeters).
IT Essentials: PC Hardware and Software
12
I /O Ports
•All peripheral devices that connect to the computer such as
printers, scanners, and so on, use connectors on the back of the
computer known as ports.
•There are different types of ports on the computer that serve
different purposes.
IT Essentials: PC Hardware and Software
13
Serial Ports
•A serial port can be used to connect devices that use a serial
interface such as a modem, scanner, mouse, etc.
•Generally, a PC can identify up to four serial ports, but the
typical computer contains only two, referred to as COM1 and
COM2.
•A serial port transmits data bits one after the other (serially) over
a single line.
IT Essentials: PC Hardware and Software
14
Parallel Ports
•A parallel port is a socket on the computer that is used to
connect a printer or other peripheral device such as a portable
hard disk, tape backup, scanner, or a CD-ROM.
•The parallel port contains eight lines for transmitting an entire
byte (8 bits) across the eight data lines simultaneously.
•Parallel ports can be configured as LPT1, LPT2, or LPT3.
IT Essentials: PC Hardware and Software
15
PS/2 Ports
•PS/2 keyboard or PS/2 mouse ports are used to connect your
PC to its keyboard and mouse.
•Though both ports look identical, the mouse (green) and
keyboard (purple) ports are not interchangeable.
•Usually both ports are color coded or labeled to avoid any
confusion.
IT Essentials: PC Hardware and Software
16
EIDE and SCSI Controllers
•The internal hard drive (discussed later in this chapter) is
connected to a disk controller with a cable.
•The hard drive and other devices can use one of two types of
interface controllers to work with the computer.
•These include the Enhanced Integrated Drive Electronics
(EIDE), and Small Computer System Interface (SCSI,
pronounced "scuzzy") connections.
IT Essentials: PC Hardware and Software
17
EIDE Controllers
•Enhanced IDE (EIDE) is the "new and improved" Integrated
Drive Electronics (IDE) drive interface.
•Not confined to IDE's 528 MB of data, the EIDE interface can
handle up to 8.4 GB or more.
•While IDE can support only two drives, EIDE can support up to
four devices using two IDE cables.
IT Essentials: PC Hardware and Software
18
SCSI Controllers
•The Small Computer Systems Interface (SCSI ) controller evolved from
the Shugart Associates Standard Interface (SASI).
•Like EIDE, SCSI devices have the controlling electronics on each of
the drives.
•A standard SCSI interface will allow up to seven devices to be
connected to one SCSI adapter or controller. If the SCSI card is
counted, it makes eight SCSI devices.
•Such devices may include hard drives, CD-ROM drives, taped drives,
scanners, and removable drives.
•Each SCSI device in the chain, including the SCSI controller card is
given a SCSI ID number from 0 to 7; #0 for the primary boot device
(hard drive), and #7 for the SCSI controller card.
IT Essentials: PC Hardware and Software
19
Hard Disk Drive
•The HDD has a much larger storage capacity than the floppy for
long-term storage.
•It stores your programs and files, as well as the operating
system.
•Typically, the HDD is an internal drive that cannot be removed
from the computer.
IT Essentials: PC Hardware and Software
20
Hard Disk Drive Components
•All hard disk drives share a common set of components. These
components include: Disk platters, read/write heads, head
actuator assembly, spindle motor, logic/circuit board,
bezel/faceplate, configuration jumpers, and interface connectors.
•Disk platters are the actual media on which data is stored in
the hard disk drive.
•Read/write heads are used to access the media. The disk
platters require a read/write head for each side.
•Spindle motor which spins the platters.
IT Essentials: PC Hardware and Software
21
Interrupt Request
•Modern computers and operating systems owe their reliability to
the organized way in which they handle internal transactions.
• Various hardware devices, for example, may want to tell the
CPU that they have some information available that is ready for
transfer.
•The devices indicate this by making an interrupt request, or IRQ.
•It is a general rule that IRQs CANNOT be shared.
IT Essentials: PC Hardware and Software
22
Interrupt Request
IT Essentials: PC Hardware and Software
23
Direct Memory Access
•Direct Memory Access (DMA) channels allow devices to bypass
the processor and directly access the computer memory.
• Devices with a DMA channel assignment, as a result, gain the
advantage of faster data transfers.
•DMA channels are typically used by high-speed communication
devices for transferring large amounts of data at high speeds.
•Examples of such devices include sound cards, some network
cards, some SCSI cards, some disk drives, and some tape
backup drives.
IT Essentials: PC Hardware and Software
24
I /O Address
•In addition to an IRQ, computer components also need to be
assigned an I/O port number.
•An I/O port number is a memory address where data is
temporarily stored as it moves in and out of the devices.
•The I/O address is very similar to a post office box.
IT Essentials: PC Hardware and Software
25
I /O Address
Frequently referred to I / O Addresses:
•3F8 = COM1
•2F8 = COM2
•3E8 = COM3
•2E8 = COM4
•378 = LPT1
•278 = LPT2
IT Essentials: PC Hardware and Software
26