Presentation Template

Download Report

Transcript Presentation Template

RFMTC11
Impact of Moisture Content on
RFID Antenna Performance
for Wood-Log Monitoring
Sohil Shahabi Ghahfarokhi, Sathyaveer Prasad, Danial Tayari
University of Gävle
[email protected], [email protected], [email protected]
October 4, 2011
RFMTC11
GÄVLE OCTOBER 4–5th 2011
Presentation outline
RFMTC11
2011-10-04
•
•
•
•
•
•
•
•
•
•
Traditional wood supply chain
RFID in wood supply chain
Challenges of using RFID in wood supply chain
Effect of moisture content on the dielectric
constant of wood
Parameters for RFID tag performance evaluation
Antenna design
Simulation results
Reader range calculations
Summary
Questions
2
Traditional Wood Supply Chain
RFMTC11
Designated
Area
Transport
Logged
Area
Cutter
Piles/Stacks
of log
Stamping
Collectors
Factory
2011-10-04
3
RFID in Wood Supply Chain
RFMTC11
Designated
Area
RFID
Transport
Logged
Area
Cutter
Piles/Stacks
of log
RFID
Collectors
Factory
2011-10-04
4
RFMTC11
Challenges of using RFID in
wood supply chain
• The whole process should be completed 3-5 weeks.
• Processing time can go up to 15 weeks during
winter.
• During these 15 weeks, moisture content may vary
due to environmental factors like sun, rain, snow,
etc.,
• Hence, it influences the RFID tag and reader
performance.
2011-10-04
5
Effect of Moisture Content on
the Dielectric Constant of Wood
RFMTC11
• Moisture content of wood: the weight of water expressed as a
fraction ,usually a percentage, of the weight of oven dry wood.
• Dielectric constant
• Loss tangent
Moisture content
Dielectric constant Loss tangent
5%
1.8
0.08
10%
2.1
0.11
20%
3.2
0.17
30%
4.5
0.20
40%
5.3
0.19
80%
8.8
0.15
120%
12.3
0.11
Ref: G.I. Torgovnikov, Dielectric properties of wood and wood based material., Springer series in
wood science, Berlin Springer-Vlg cop, 1993.
2011-10-04
6
RFMTC11
Parameters for RFID tag
performance evaluation
• RFID Antenna Parameters
– Return Loss
– Directivity
– Radiation Efficiency
• RFID performance is evaluated by computing the
maximum reader range
Max. reading range [Ref] defined using Friis transmission
formula:
Ref: Choo, J.; Ryoo, J.; Hong, J.; , "Novel RFID tag antenna with stability to material," Antennas and
Propagation Society International Symposium, 2008. AP-S 2008. IEEE , vol., no., pp.1-4, 5-11 July 2008.
2011-10-04
7
Antenna Design
RFMTC11
2011-10-04
•
•
•
•
•
Designed in HFSS
Folded Dipole
Polyamide Casing
Operating Frequency: 867 MHZ
Dielectric Constant of wood: 3.2
8
Simulation Results
RFMTC11
2011-10-04
Return loss of designed antenna at different dielectric
constants
9
Simulation Results
RFMTC11
2011-10-04
Radiation efficiency vs. Directivity at different dielectric constants
10
Reader Range Calculation
RFMTC11
Max. reading range defined using Friis transmission formula:
Reader Parameters
(XCODEEIU9050)
Antenna Parameters (From
Simulation Results)
Return Loss (ηreader)= -10 dB
Return Loss (ηtag)
Radiation efficiency(Effreader)= 0.8 Radiation Efficiency (Efftag)
Directivity (Dreader) = 0 dBi
Directivity (Dtag)
Transmitted Power (Pt )=29.5dBm
Polarization efficiency = 1
2011-10-04
11
Reader Range Calculations
RFMTC11
εr
Loss Moisture
tangent Content
ηtag
Dtag
Efftag
(dB)
Max.
%
Range change
(m)
1.8
10%
2
-
2.1
3.2
0.11
0.17
10%
20%
-3.7
-5.9
2.23
2.36
30%
27%
4.5
0.2
30%
-5
2.5
22%
1.78
11%
5.3
8.8
0.19
0.15
40%
80%
-4.6
-3.2
2.56
2.19
22%
27%
1.76
1.61
12%
20%
A= Reader range for desired dielectric constant
B= Reader range for εr =3.2
2011-10-04
12
Summary
RFMTC11
2011-10-04
• Increase of moisture content decreases the
resonating frequency and increases the
return loss of the RFID antenna. Hence
the maximum reader range decreases up
to 20%.
• Variation of maximum reader range may
increase the overall cost of the wood
supply chain and also reduces the
reliability.
13
Questions
RFMTC11
2011-10-04
14