SEE 2053 Teknologi Elektrik - ENCON

Download Report

Transcript SEE 2053 Teknologi Elektrik - ENCON

SEE 2053 Teknologi Elektrik
Chapter 2
Electromagnetism
Electromagnetism
1. Understand magnetic fields and their
interactions with moving charges.
2. Use the right-hand rule to determine the
direction of the magnetic field around a
current-carrying wire or coil.
Electromagnetism
3. Calculate forces on moving charges and
current carrying wires due to magnetic
fields.
4. Calculate the voltage induced in a coil by a
changing magnetic flux or in a conductor
cutting through a magnetic field.
5. Use Lenz’s law to determine the polarities
of induced voltages.
Electromagnetism
6. Apply magnetic-circuit concepts to
determine the magnetic fields in practical
devices.
7. Determine the inductance and mutual
inductance of coils given their physical
parameters.
8. Understand hysteresis, saturation, core
loss, and eddy currents in cores composed
of magnetic materials such as iron.
Electromagnetism
• Magnetism is a force field that acts on
some materials (magnetic materials)
but not on other materials (non
magnetic materials).
• Magnetic field around a bar magnet
• Two “poles” dictated by direction of the
field
• Opposite poles attract (aligned
magnetic field)
• Same poles repel (opposing magnetic
field)
Electromagnetism
By convention, flux lines leave the northseeking end (N) of a magnet and enter its
south-seeking end (S).
Electromagnetism
Magnetic flux lines form closed paths that are
close together where the field is strong and
farther apart where the field is weak.
N
N
Strong field
S
weak field
S
Electromagnetism
Magnetic materials (ferromagmagnetic): iron,
steel, cobalt, nickel and some of their alloys.
Non magnetic materials: water, wood, air,
quartz, silver, copper etc.
Electromagnetism
The basic source of the magnetic field is electrical charge
in motion. In magnetic materials, fields are created by
the spin of electrons in atoms. These fields aid one
another, producing the net external field that we observe.
In most other materials (non magnetic materials), the
magnetic fields of electrons tend to cancel one another.
In a current-carrying wire, the moving electrons in the wire
create magnetic fields around the wire.
Electromagnetism
Iron bar
Magnetic molecules
In an unmagnetised state, the molecular magnets lie in
random manner, hence there is no resultant external
magnetism exhibited by the iron bar.
wood
Non-magnetic molecules
Electromagnetism
N
S
N
S
Iron bar
Magnetic molecules
When the iron bar is placed in a magnetic field or under
the influence of a magnetising force, then these molecular
magnets start turning their axes and orientate themselves
more or less along a straight lines.
Electromagnetism
N
S
N
S
Iron bar
Magnetic molecules
When the iron bar is placed in a very strong magnetic
field, all these molecular magnets orientate themselves
along a straight lines (saturated).
Electromagnetism
Field Detector
• Can use a compass to map
out magnetic field
• Field forms closed “flux
lines” around the magnet
(lines of magnetic flux
never intersect)
• Magnetic flux measured in
Webers (Wb)
• Symbol 
Magnetic Flux
Magnetic flux lines are assumed to have the following
properties:
• Leave the north pole (N) and enter the south pole (S) of
a magnet.
• Like magnetic poles repel each other.
• Unlike magnetic poles create a force of attraction.
• Magnetic lines of force (flux) are assumed to be
continuous loops.
Magnetic Field Conductor
• Magnetic fields also
exist in the space
around wires that
carry current.
• Field can be
described using “right
hand screw rule”
Right Hand Rule
• Thumb indicates
direction of
current flow
• Finger curl
indicates the
direction of field
Right-Hand Rule
Wire Coil
• Notice that a
carrying-current
coil of wire will
produce a
perpendicular
field
Magnetic Field: Coil
• A series of coils produces a field
similar to a bar magnet – but weaker!
Magnetic Field: Coil
Magnetic Field

Flux Ф can be increased by
increasing the current I,
Ф
I
I
Magnetic Field

Flux Ф can be increased by
increasing the number of turns N,
Ф
N
I
N
Magnetic Field

Flux Ф can be increased by
increasing the cross-section
area of coil A,
Ф
N
A
I
A
Magnetic Field

Flux Ф can be increased by
increasing the cross-section
area of coil A,
Ф
N
I
A
A
Magnetic Field

Flux Ф is decreased by
increasing the length of coil l,
Ф
l
N
I
A
1
l
Magnetic Field

Therefore we can write an
equation for flux Ф as,
Ф
l
NIA
l
N
or
I
A
Ф =
μ0 NIA
l
Magnetic Field
Ф =
μ0 NIA
l
Where μ0 is vacuum or non-magnetic material
permeability
μ0 = 4π x 10-7 H/m
Magnetic Field: Coil
• Placing a ferrous material
inside the coil increases the
magnetic field
• Acts to concentrate the field
also notice field lines are
parallel inside ferrous element
• ‘flux density’ has increased
Magnetic Field

By placing a magnetic material
inside the coil,
Ф =
l
N
I
A
μ NIA
l
Where μ is the
permeability of the
magnetic material
(core).
Magnetic Field

By placing a magnetic material
inside the coil,
Ф =
l
N
I
A
μ NIA
l
Where μ is the
permeability of the
magnetic material
(core).
Flux Density
Permeability
• Permeability μ is a measure of the ease by
which a magnetic flux can pass through a
material (Wb/Am)
• Permeability of free space μo = 4π x 10-7
(Wb/Am)
• Relative permeability:
Reluctance
• Reluctance: “resistance” to
flow of magnetic flux
Associated with “magnetic
circuit” – flux equivalent to
current
• What’s equivalent of voltage?
Magnetomotive Force, F
• Coil generates magnetic
field in ferrous torroid
• Driving force F needed
to overcome torroid
reluctance
• Magnetic equivalent of
ohms law
Circuit Analogy
Magnetomotive Force
• The MMF is generated by the coil
• Strength related to number of turns
and current, measured in Ampere
turns (At)
Field Intensity
• The longer the magnetic path the greater
the MMF required to drive the flux
• Magnetomotive force per unit length is
known as the “magnetizing force” H
• Magnetizing force and flux density related
by:
Electric circuit:
Emf = V = I x R
Magnetic circuit:
mmf = F = Φ x
=Hxl
= (B x A) x
l
= (B x A) x
=Bx
l
μ
μA
=Hxl
Hysteresis
• The relationship between B and H is
complicated by non-linearity and
“hysteresis”
=Φx
l
=
μA
0.16
=
1.818 x 10-3 x 2 x 10-3
= 44004.4
=Φx
=Φx
= 4 x 10-4 x 44004.4
= 17.6
I=
F
N
=
17.6
400
= 44 mA
Circuit Analogy
Leakage Flux and Fringing
fringing
Leakage
flux
Leakage Flux
It is found that it is impossible to confine all the
flux to the iron path only. Some of the flux
leaks through air surrounding the iron ring.
Leakage coefficient λ =
Total flux produced
Useful flux available
Fringing
Spreading of lines of flux at the edges of the
air-gap. Reduces the flux density in the airgap.
Forces on Charges Moving
in Magnetic Fields
Forces on Charges Moving
in Magnetic Fields
f  qu  B
f  quBsin 
Forces on Current-Carrying
Wires
df  idl  B
f  ilB sin 
Force on a current-carrying
conductor
It is found that whenever a current-carrying
conductor is placed in a magnetic field, it
experiences a force which acts in a direction
perpendicular both to the direction of the current
and the field.
N
S
Force on a current-carrying
conductor
It is found that whenever a current-carrying
conductor is placed in a magnetic field, it
experiences a force which acts in a direction
perpendicular both to the direction of the current
and the field.
N
S
Force on a current-carrying
conductor
It is found that whenever a current-carrying
conductor is placed in a magnetic field, it
experiences a force which acts in a direction
perpendicular both to the direction of the current
and the field.
N
On the right hand
side, the two fields in
the opposition
On the left hand side,
the two fields in the
same direction
S
Force on a current-carrying
conductor
Hence, the combined effect is to strengthen the
magnetic field on the left hand side and weaken it
on the right hand side,
N
On the right hand
side, the two fields in
the opposition
On the left hand side,
the two fields in the
same direction
S
Force on a current-carrying
conductor
Hence, the combined effect is to strengthen the
magnetic field on the left hand side and weaken it
on the right hand side, thus giving the distribution
shown below.
N
On the right hand
side, the two fields in
the opposition
On the left hand side,
the two fields in the
same direction
S
Force on a current-carrying
conductor
This distorted flux acts like stretched elastic cords
bend out of the straight , the line of the flux try to
return to the shortest paths, thereby exerting a
force F urging the conductor out of the way.
N
On the left hand side,
the two fields in the
same direction
F
S
On the right hand
side, the two fields in
the opposition
Faraday’s Law
First Law.
Whenever the magnetic flux linked with a
coil changes, an emf (voltage) is always
induced in it.
Or
Whenever a conductor cuts magnetic flux,
an emf (voltage) is induced in that
conductor.
Faraday’s Law
Second Law.
The magnitude of the induced emf
(voltage) is equal to the rate of change of
flux-linkages.
d
e
dt
where   N
d ( N ) Nd
e

dt
dt
Direction of Induced emf
The direction (polarity) of induced emf
(voltage) can be determined by applying
Lenz’s Law.
Lenz’s law is equivalent to
Newton’s law.
Lenz’s Law
Lenz’s law states that the polarity of
the induced voltage is such that the
voltage
would produce a current that opposes
the change in flux linkages
responsible for inducing that emf.
N
I
S
SELF INDUCTANCE, L
From Faraday’s Law:
d
eN
dt
By substituting
Ф =
μ NIA
l
Φ
i
v
e
SELF INDUCTANCE, L
 NIA 
d

l 

eN
dt
Rearrange the
equation, yield
e
i
v
N A di
2
l
Φ
dt
e
SELF INDUCTANCE, L
e
N A di
2
l
dt
Φ
or
i
di
eL
dt
where
L
N 2 A
l
v
e
MUTUAL INDUCTANCE, M
From Faraday’s Law:
d
e2  N 2
dt
substituting
Ф =
μ N1i1A
l
Φ
i
v1
e1
v2
e2
MUTUAL INDUCTANCE, M
 N1i1 A 
d

l 

e2  N 2
dt
rearrange
Φ
i
v1
e1
v2
e2
 A  di1
e2  N 2 N1  
 l  dt
MUTUAL INDUCTANCE, M
 A  di1
e2  N 2 N1  
 l  dt
Φ
or
di1
e2  M
dt
where
 A
M  N 2 N1  
l
i
v1
e1
v2
e2
MUTUAL INDUCTANCE, M
 A
M  N 2 N1  
l
For M 2,
 A
M   N2 N  
l
2
2
2
2
2
1
 A
2 A 
M  N1    N 2  
l
l 
2
2
= L1 x L2
MUTUAL INDUCTANCE, M
M 2 = L1 x L2
M = √(L1 x L2)
or
M = k√(L1 x L2)
k = coupling coeeficient (0 --- 1)
Dot Convention
Aiding fluxes are produced by currents
entering like marked terminals.
Hysteresis Loss
• Hysteresis loop
Uniform distribution
• From Faraday's law
Where A is the cross section area
Hysteresis Loss
• Field energy
Input power :
Input energy from t1 to t2
where Vcore is the volume of the
core
Hysteresis Loss
• One cycle energy loss
where is the closed area of B-H
hysteresis loop
• Hysteresis power loss
where f is the operating
frequency and T is the period
Hysteresis Loss
• Empirical equation
Summary : Hysteresis loss is proportional to f and ABH
Eddy Current Loss
• Eddy current
Along the closed path, apply Faraday's law
where A is the closed area
Changes in B → = BA changes
→induce emf along the closed path
→produce circulating circuit (eddy current) in the core
• Eddy current loss
where R is the equivalent resistance along the
closed path
Eddy Current Loss
• How to reduce Eddy current loss
– Use high resistivity core material
e.g. silicon steel, ferrite core (semiconductor)
– Use laminated core
To decrease the area closed
by closed path
Lamination thickness
0.5~5mm for machines, transformers at line frequency
0.01~0.5mm for high frequency devices
Eddy Current Loss
• Calculation of eddy current loss
– Finite element analysis
Use software: Ansys®, Maxwell®, Femlab®, etc
– Empirical equation
Core Loss
• Core Loss
Pc  Ph  Pe
where Ph  hysteresisloss
Pe  eddy current loss