Smart Cards Personalisation Machine in UPPAAL
Download
Report
Transcript Smart Cards Personalisation Machine in UPPAAL
Car Periphery Supervision System:
Case Study 3
Ed Brinksma
University of Twente
CPS: Informal description
CPS obtains and makes
available for other
systems information about
environment of a car. This
information may be used
for:
Parking assistance
Pre-crash detection
Blind spot supervision
Lane change assistance
Stop & go
Etc
Based on Short Range
Radar (SRR) technology
Ed Brinksma
The CPS considered in
this case study
One sensor group only
(currently 2 sensors)
Only the front sensors
and corresponding
controllers
Application: pre-crash
detection, parking
assistance, stop & go
Car Periphery Supervision System: Case Study 3
2
CPS: General model
Hybrid
Environment
Sensors
Measurement
control (ECU)
Stochastic
ECU – tasks
on OSEK
Car
Airbag control
Belt Tensioner
HMI
Etc
Ed Brinksma
HYBRID
TIMED
STOCHASTIC
Sensor
W
O
R
L
Sensor
ECU
timing analysis Tasks
running
C
A
R
on
D
OSEK
Sensor
Car Periphery Supervision System: Case Study 3
3
Requirements, assumptions & constraints
Proposed requirements (initially unclear)
To provide the information about the environment to the belt
tensioner, the air bag controller and HMI on time
Avoid false alarms, i.e. to provide reliable information
Proposed assumptions & constraints
Environment (physical) constraints – a maximal (de-)
acceleration, a maximal velocity, etc.
Information consumers constraints – activation time, etc.
Sensors properties – placement, physical properties
ECU constraints – computation delays, communication delays,
etc.
Ed Brinksma
Car Periphery Supervision System: Case Study 3
4
Sensor scan modes
10 m DScan mode
?
cycle: appr. 10 ms
?
1.4 m CVScan mode
cycle: < 1.5 ms
2 m DScan mode
?
Ed Brinksma
cycle: appr. 2 ms
Car Periphery Supervision System: Case Study 3
5
Environment Analysis
Car width 1.826m, sensors displacement 0.913m
10
Car width 1.826m, sensors displacement 0.913m
Air Bag Controller
Belt Tensioner
10
9
9
8
8
7
7
6
55 m/s
6
50 m/s
45 m/s
5
0.91
5
40 m/s
35 m/s
4
4
30 m/s
3
3
DScan(2m)
2
1
60 m/s
0.46
25 m/s
20 m/s
2
15 m/s
CVMode zone (1.41m)
CVArea
0.46
0
0
-6
-4
-2
0
2
Different width of
cars (1.5-2m)
Interval for the
sensors placement
(0.6-1.4m)
Interval of velocities
(5-60m/s)
Ed Brinksma
4
6
10 m/s
1
20 m/s
40 m/s
-6
5 m/s
60 m/s
-4
-2
0
2
4
6
Visibility analysis (MatLab)
difference is big, but not important for the
current services
Trajectories analysis
CVMode information is important only for
the Air Bag Controller
For the Belt Tensioner only early DScan
information is important
Car Periphery Supervision System: Case Study 3
6
UPPAAL model
Env 1
Env 2
Periodic
Sensor 1
scan
Mode switch
d1
Periodic Sensor 2 d2
scan
Measurement
controller
d=f(d1,d2)
ECU
Mode switch
Env1,Env2: distance between object and car
The front of the car is divided into 12 smaller regions
Sensor mode is switched from long distance scan to short distance
scan based on “d”
ECU’s knowledge about the
object in collision course is
at most one region behind
Ed Brinksma
Under assumption on the
velocity of the object and the
car, and the number of
objects, the property can be
satisfied
Car Periphery Supervision System: Case Study 3
7
Results
Requirements, assumptions &
constraints list
Meeting in Frankfurt, Robert
Bosch GmbH (03/2003)
Visibility analysis
Trajectories analysis
Presentations in Ametist
meetings in
CVScan information is
important only to the air bag
controller
CVScan and DScan (2m) is not
relevant for the belt
tensioner (if velocity is more
than 20m/s~65km/h)
Short DScan may be tuned to
the air bag controller or the
belt tensioner needs
Uppaal model, verification of
certain properties
Ed Brinksma
Twente (09/2002)
Dortmund (11/2002)
Cassis (4/2003)
Conferences
B.Gebremichael, H.Hermanns,
T.Krilavičius, Y.S.Usenko
Hybrid Modeling of a Vehicle
Surveillance System with
Real-Time Data Processing,
Dynamical System Modelling and
Stability Investigation, Kiev,
05/2003
Car Periphery Supervision System: Case Study 3
8
Plans
Recent news:
Bosch has put the SRR system development on ice.
Wider set of the
trajectories
with (de-) acceleration
non-orthogonal trajectories
Extension of problem
hybrid analysis
control aspects
active cruise control
platoon navigation
Applications of the
modeling results to tune
the Uppaal model
Pushing tools to the limit
and using state of the
art methods to overcome
these limitations
Experimentation with
different short DScan
distances
Tuning the Uppaal model
to the tool
Ed Brinksma
Car Periphery Supervision System: Case Study 3
9