Transcript AccuTec 10/22 Barrel Pusher Patent Pending

AccuTec LLC
10/22® Barrel Pusher
Patent Pending
Proudly Made In The USA
What It Does
The AccuTec 10/22® BARREL PUSHER is a
tool designed to facilitate the easy
removal of factory and aftermarket barrels
from the receivers of Ruger® 10/22® rifles.
The 10/22® Barrel Pusher and Its Parts
How It Does It
It accomplishes this task by locking itself
inside the stripped receiver via the
insertion of the Upper Guide Rod into the
magazine retention hole located in the
forward portion of the receiver, and by the
capturing of the Lower Guide Rod by the
re-installment of the forward trigger guard
cross pin. Installation on a field stripped
receiver literally takes seconds.
The 10/22® Barrel Pusher Installed
(Top View)
The 10/22® Barrel Pusher Installed
(Side View)
How It Does It (con’t)




Once installed, the bolt is turned clockwise with a
user-supplied wrench, driving the Pusher Bar
forward and resulting in the effortless removal of
the barrel out the front of the receiver.
The AccuTec Barrel Pusher negates the need to
place the receiver or barrel into a padded vice.
Any mounted optics may be left in place.
The Barrel Pusher replaces brute force with
controlled mechanical leverage.
Physical Description

Each 10/22® Barrel Pusher is machined to high tolerances
using state of the art CNC equipment. The Pusher and
Anchor bars are made from ¼” thick A-2 tool steel. Both
Guide Rods are machined from 5/16” steel rod, then heat
treated to a Rockwell (C) hardness of 50. The custom Pusher
is constructed from 6/6 Nylon, which is extremely durable,
yet won’t mar the barrel. A rust resistant Black Oxide
coating is applied to all metal parts at no extra cost.

Each Tool comes with a lifetime guarantee.

The Tool’s physical size is roughly 2” tall, 4” long and it
weighs 5 ½ ozs.

Every AccuTec Tool is proudly made in the USA.
AccuTec 10/22® Barrel Pusher
Summary








The AccuTec 10/22® Barrel Pusher allows anyone to
remove an existing barrel without the need for a benchmounted vice and literally requires no effort.
The Barrel Pusher will not harm, scratch or mar any portion
of the barrel or receiver.
Any mounted scopes/optics may remain in place.
Works on any caliber 10/22®
The perfect tool for the professional or amateur gunsmith.
Each tool is individually inspected for quality control.
Lifetime guarantee.
Made in America.