Transcript Modele de Presentation

SY/Max to Quantum
Quick Wiring Adapter
(QWA)
Frank Prendergast
Industrial Solution Center
Business Development Manager for Services
978-975-9122
[email protected]
SY/Max to Quantum QWA
●What is the Quick Wiring Adapter
●Schneider Electric have designed a new Quantum I/O
terminal block that SY/Max terminal blocks connect
directly inside.
●This allows SY/Max I/O to be quickly converted to
Quantum I/O without disturbing field wiring.
●Cost and Productivity benefits of
migrating to Quantum
– SY/Max is 187% more expensive than
Quantum to repair (on average)
– SY/Max is 89% more expensive than
Quantum to exchange. (on average)
– Quantum Mean Time Between Failure values
are 4 to 20 times greater than SY/Max!
– Quantum CPUs are 5 to 10x faster leading
to greater productivity
SY/Max to Quantum QWA
●What is the value proposition?
●Utilize existing SY/Max field wiring and terminal blocks
– Less time and labor required to change
– Reduce chance of wiring errors
●Minimizes conversion time per drop
– MINIMIZE PLANT DOWNTIME (associated with the upgrade)
– Rewire = 5 to 6 hours per drop
QWA = 1 hour per drop
●No wire is removed and circuit board in QWA is validated to be correct.
●Minimizes your overall RISK of change !
●Minimize your cost and equipment downtime with less expensive more
robust Quantum hardware.
SY/Max to Quantum QWA
●How it is ordered.
●Please call 1-800-468-5342 extension 1 and
ask for Field Services.
●and
●Email a list of all of the SY/Max modules that
you want to replace in an email to
[email protected]
●We will send you a quotation for the new
Quantum modules, Quick Wiring Adapters,
and SY/Max adapter plates you need.
●April 20th first customer order
●Lead time is 4 weeks
Current Symax Modules supported
8030-HIM-101
8030-HOM-222
8030-HIM-102
8030-HOM-232
8030-HIM-131
8030-RIM-121
8030-HIM-141
8030-ROM-121
8030-HIM-151
8030-RIM-101
8030-HIM-161
8030-RIM-361
8030-HOM-211
8030-ROM-221/222
8030-HOM-221
8030-ROM-431
8030-HOM-231
RIM125
8030-HOM-241
ROM271
8030-HOM-251
RIM731
8030-HOM-261
ROM871
8030-HOM-271
SY/Max to Quantum QWA
●FAQs.
● Q. Is the new QWA any deeper or longer than my SY/Max system?
● A. Yes. The QWA is ½ inch longer and deeper.
● Q. How do I know what this QWA does electronically?
● A. The QWA connects wire to wire. Each QWA has a unique part number on it that
identifies which SY/Max module and Quantum module it is designed for. For example a
HIM101DAI5400 states that it is a SY/Max 8030HIM101 module connected to a
Quantum 140DAI5400 module. In addition a wiring diagram is included with each QWA.
● Q. Are there any limitations to using the QWA?
● A. The QWA was designed to handle the same worst case electrical conditions as the
SY/Max module would encounter.
● Q. Do I have to worry about electrical live wires?
● A. The QWA has a cover (same as standard Quantum terminal block) so it offers the
same safety as long as the cover is closed.
SY/Max to Quantum QWA
Installation Step 1
Observe all
safety rules and turn
off all power sources
going to the rack and
I/O modules !
Remove all electrical
power from the rack
and all non
I/O modules
SY/Max to Quantum QWA
Installation Step 2
Remove all I/O
Terminal blocks from
I/O modules
SY/Max to Quantum QWA
Installation Step 3
Remove all I/O
modules from the
rack
Remove the SY/Max
rack
SY/Max to Quantum QWA
Installation Step 4
Install the
SY/Max to Quantum
Adapter plate kit
This allows you to
install the Quantum
backplane without
having to drill into
the enclosure
sub-panel.
SY/Max to Quantum QWA
Installation Step 5
Install the Quantum
I/O modules in the
same location as
previous SY/Max
I/O module.
SY/Max to Quantum QWA
Installation Step 6
Install the
SY/Max to Quantum
Quick Wiring Adapter
terminal block into
the Quantum I/O
Module.
Open the cover
To the Quick Wiring
Adapter.
SY/Max to Quantum QWA
Installation Step 7
Insert the SY/Max
terminal block into
the SY/Max to Quantum
QWA
Close the cover.
You are now ready
to startup your system
knowing that the wiring
from your older SY/Max
system is now being
used in your Quantum
System !