Transcript 'Heat Engine Tools and Techniques' Transportation
Start...
1.0 Basic Handtools By Category
Screwdriver types
Pliers variations
Wrenches classified
Hammers
Screwdriver Types
Standard or Slotted Tip
Phillips
Hex or Allen head
Offset
Torx
Ratcheting
Standard Tip
Phillips
seven sizes: 000,00,0,1,2,3,4
Hex
Offset
Torx
Ratcheting
Pliers
think of as “super-fingers”; never on bolts/nuts
Pliers Combination or Slip Joint Arc Joint or Water Pump or Channel Lock or Tongue and groove Side Cutting or Diagonal Cutting Needle Nose Locking or Vice Grip others (electrical crimps...)
Combination
Water Pump or Arc Joint or Channel Lock
Side Cutting
Neddle Nose
Locking Pliers
Others
Wrenches Hand tool used for turning threaded fasteners by use of gripping jaws. There are a number of different types of wrenches.
Wrenches Open End Box End Combination Adjustable or Crescent Obstruction Ratcheting Box Offset Box Flare Nut Socket or Ratchet
Open End
Box End
Combination
Adjustable/Cresent
Obstruction
Ratcheting Box
Offset Box
Flare Nut
Socket Wrenches
Drive Size ¼ 3/8 ½ ¾ 1
Sockets Four descriptors for every socket 1. Size (dia.) (Metric or SAE) 2. Depth 3. Drive 4. Point Style
Sockets Size, or Dia.
Always written on side
Point Style
Sockets (Deep Vs. Short)
Hammers Ball Peen Dead Blow Drilling / Engineer / Mini Sledge Claw
Hammers
The End