PowerPoint Template
Download
Report
Transcript PowerPoint Template
SPIE Optics + Photonics 2009
NX9.0 - Install Guide
School of Mechatronics
Gwangju Institute of Science and Technology
[1]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
What is NX?
NX is a software used in the broad area such as product design, developing
process and manufacturing. Main modules of NX are solid & feature
modeling, assembly modeling, drafting, freeform modeling and NX
knowledge fusion author.
School of Mechatronics
Gwangju Institute of Science and Technology
[2]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Minimum recommended specifications (NX 9 ver.)
Following specifications are recommended for NX 9 installation
OS
Windows 7 64bit
CPU
Intel i5 or i7 multiple core
Memory
4GB
VGA
Refer supported graphics file*
* You can download at the http://nsl.gist.ac.kr/Intranet/Instruments.html
* You can use GeForce series and Intel CPU HD Graphic series.
But it is not supported.
School of Mechatronics
Gwangju Institute of Science and Technology
[3]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Install procedure
1.
Select ‘Install NX’
2.
Select the install language => ‘English’ or ‘Korean’
2
1
School of Mechatronics
Gwangju Institute of Science and Technology
[4]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Install procedure cont.
3.
Select next button at the ‘Install Shield Wizard’
4.
Select ‘Typical type’ and click the next button
3
School of Mechatronics
Gwangju Institute of Science and Technology
[5]
4
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Install procedure cont.
5.
Establish the install route and put next button
6.
Write MECHA-PC instead of xxxx. (
License Server – 28000@MECHA-PC )
Then, put next button
5
School of Mechatronics
Gwangju Institute of Science and Technology
6
[6]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Install procedure cont.
7.
NX language selection => ‘English’ or ‘Korean’ and next
8.
Select install button after checking the install information
7
School of Mechatronics
Gwangju Institute of Science and Technology
8
[7]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Install procedure cont.
9.
Wait until installation is done
10. Click finish button after install completing
10
9
School of Mechatronics
Gwangju Institute of Science and Technology
[8]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Patch (NX9.0.x will given)
1.
Run a NX 9.0.x Launch.exe and select ‘Install NX Update’
2.
Wait until ‘계속하려면 아무 키나 누르십시오…’ on the dos. After then,
you can quit dos
2
1
School of Mechatronics
Gwangju Institute of Science and Technology
[9]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Error
1.
Start and check the NX after finishing installation. When you see the
following pop up while stating NX, then do following actions.
1
School of Mechatronics
Gwangju Institute of Science and Technology
[10]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Error cont.
2.
Click ‘Start – Program – Siemens NX 9.0 – NX 라이선스 도구 –
라이선스 도구’
3.
Click ‘번들 설정’
2
School of Mechatronics
Gwangju Institute of Science and Technology
3
[11]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Error cont.
4.
Select NX Academic Perpetual License which is consist of ‘3d to 2d
flattener’ and ‘adv_assemblies’ and etc . And click ‘적용’ button
5.
And after doing all of them, restart NX program. When you see the figure
5, then all of the NX installation is done.
4
School of Mechatronics
Gwangju Institute of Science and Technology
5
[12]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
NX 9.0 Documents Installation
1.
Put new Documentation CD and select ‘Install Documentation’
2.
Click next button at ‘Install Shield Wizard’
2
1
School of Mechatronics
Gwangju Institute of Science and Technology
[13]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
NX 9.0 Documents Installation cont.
3.
Establish the install route and put next button
4.
Select install button and after installing, click finish button
3
School of Mechatronics
Gwangju Institute of Science and Technology
[14]
4
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Materials
We have following materials
• NX Installation and Documentation CDs
• Installation guide (pdf file)
• Two books and pdf file of basic training manual
• Movie files of NX example
These are keeping in 3D Micro-manufacturing Laboratory.
All of them are managed by Jun Hee Choi who is M.S in 3DML. If
someone want to install NX, then come to our lab and ask to Jun Hee
All ISO files (Install & Documentation) are in the
\\TFSSERVER\Utility and etc\유틸리티\
School of Mechatronics
Gwangju Institute of Science and Technology
[15]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Warranty
SPACE solution warranties this software without charge for a period of
a year from date of purchase. SPACE solution warranties following
maintenance
1.
License Transfer
2.
New Version Upgrade
3.
S/W Technique and error support (On cable, On remote)
There are no implied warranties of S/W except above maintenance
Warranty is valid from 2014.10.01 to 2015.09.30
School of Mechatronics
Gwangju Institute of Science and Technology
[16]
3D Micromanufacturing Lab.
SPIE Optics + Photonics 2009
Contact address
Seogyun KIM / 김 서 균 차장
Seulgi Han / 한 슬 기 대리
• SPACE solution
• SPACE solution
• Sales Dept. / Deputy General Manager
• Technical support Help desk
• Tel : 82.2.2027.5936
• Tel : 82.2.2027.5945
• Fax : 82.2.2027.5954
• Fax : 82.2.2027.5954
• Mobile : 82.10.7436.3777
• Mobile : 82.10.7176.6729
• E-mail : [email protected]
• E-mail : [email protected]
• Homepage : http://www.spacesolution.kr
• Homepage : http://www.spacesolution.kr
School of Mechatronics
Gwangju Institute of Science and Technology
[17]
3D Micromanufacturing Lab.