Transcript FODF-1U-XX-YY-ZZ-AA-BB

FibreTec ODF Solutions
Ordering Guide for
The Patch & Patch/Splice Tray
FODF-1U-P
1.
Production Description
2.
Ordering Information
1.
2.
3.
4.
3.
FODF-1U-P Tray
Splice Trays
Accessories
Customise/Specials
Product Guide
1. Tray Description
2. Tray Capacity
3. Tray Dimensions
4. Cable Management
FibreTec Solutions Ltd, www.fibretec.ie, [email protected], Phone +353-86-8176619
FibreTec ODF Solutions
1
Product Description
The tray comes in two basic formats, The Patch only or
the Patch & Splice.
The Patch only Tray can be used for loading
Preterminated Cables in or can be supplied preloaded
with a fully terminated and tested cable of any
particular length.
The Patch & Splice version comes with a splice tray and
this unit is used for when a cable is fed in to the tray on
site and this cable is spliced on to preloaded pigtails.
Both versions of the tray has a pivot swing out main unit
that hold the adapter plate and splice tray. The Tray has
two versions that can pivot to either the left or the right
The Patchcords are managed inside the front of the tray
and are secured where they leave the tray with a velcro
band.
The tray can be mounted in 19” or 23” frame by using
different mounting brackets.
FibreTec Solutions Ltd, www.fibretec.ie, [email protected], Phone +353-86-8176619
FibreTec ODF Solutions
2 Ordering Information
FODF-1U-XX-YY-ZZ-AA-BB
Patch Only
Patch & Splice
OP
PS
Port Count
1-24
Adapter SC
Adapter LC
Adapter MU
Adapter SC/APC
Adapter LC/APC
SC
LC
MU
SA
LA
Cable Length M
Pigtails
1-500M
PT
No Splice Tray
12 Fibre Tray
24 Fibre Tray
00
12
24
FibreTec Solutions Ltd, www.fibretec.ie, [email protected], Phone +353-86-8176619
FibreTec ODF Solutions
Splice Trays
There are a number of alternative Splice Trays
that can be fitted to the Patch & Splice Tray
1.
2.
3.
12 Fibre Fusion Splice Trays
24 Fibre Fusion Splice trays
Mechanical Splice Trays
The type of Splice Tray to use will depend
mainly on the type of Pigtails Required
1.
2.
Tight Buffered
Loose Tube
The 12 Fibre Splice tray are hinged to allow easy
access to each tray.
The Trays that require Tight Buffered Pigtails
require to be thicker as the tight buffered cable
takes up more space that the bare fibre loose
tube pigtails,
FibreTec Solutions Ltd, www.fibretec.ie, [email protected], Phone +353-86-8176619
FibreTec ODF Solutions
Accessories
Each Tray is supplied with a cable
management kit and Accessories, these
include the following
1.
2.
3.
4.
5.
6.
7.
8.
ETSI Mounting Brackets
4 x Cage fasteners for mounting on frame
Test Cert (Prewired)
Cable Central Strength Member retainer (P & S)
Cable ties (P & S)
Velcro Patchcord ties
Spiral Cable Gland M12 (P & S)
Spiral Cable Gland M16 (P & S)
The Accessories supplied to both the Patch (Loaded
with Cable ) and the Patch & Splice (P & S) ODF Trays
are to assist with all standard installation methods.
FibreTec Solutions Ltd, www.fibretec.ie, [email protected], Phone +353-86-8176619
FibreTec ODF Solutions
Customise
The trays can be customised to various customer
requirements, some examples are
1. Different Mounting bracket positions to allow the
tray to be recessed or protruding in the Rack
2. Rear mounting brackets allowing the tray to be
secured to the rear of the frame
3. Left or Right pivot opening
4. Special labelling of ports
5. Various cable retaining cable clamps or glands
FibreTec ODF Solutions
3
3.1
Product Guide
Tray Description
The FibreTec 1U ODF Tray is a Rack Mount Panel that
provides superior fibre and cable management for
interconnecting fibre in various locations.
The Tray is generally used in either Telecom intra-facility or
Customer Premises to manage the interconnecting of up
to 24 individual fibres.
Customer Premises
The Panel can be mounted in the customer frame and
either
1 A preloaded cable that is installed in the panel can be
pulled or blown to a splice vault
or
2 A Patch & Splice Tray can be installed in the customers
frame and a cable can be pulled or blown into the panel
where the cable can be spliced on to the preloaded pigtails
in the tray.
FibreTec ODF Solutions
3.2
Tray Capacity
The 1U ODF Tray can be loaded with any industry
standard Adapters. The following are the
capacities for the various Adapter Configurations
SC
ST
LC
24 Fibre
24 Fibre
48 Fibre
For larger fibre counts a 2U tray can be used .
This product is (FODF-2U)
The Patchcords that are installed to the tray can
be either 2mm or 3mm cable. The Management of
the Patchcords allow for both types of cable.
The Patchcords are managed within the tray and
exit the tray at the side or the front. The tray is
designed so that when it pivots it does not cause
any disruption to the transmission on the fibres
FibreTec ODF Solutions
3.3
Tray Dimensions
D
W
The tray can be either 19”, or ETSI or 23” Mounted. These various mounting
width can be changed by fitting different mounting brackets.
Depth
=
290mm
Height
=
1U
FibreTec ODF Solutions
3.4
Cable Management
Patch & Splice
For the Patch & Splice tray the multicore cable is
managed by over-tubing the inner fibres with a flexible
tubing. This tubing is secured to the tray with cable ties
and bend radius is controlled with circular cable
guides. These ensure that the fibres do not exceed the
minimum bend radius of the fibre.
The bare fibre from the multifibre cable is managed
inside the splice tray. The pigtails installed consist of
loose tube fibre so that the bare fibre from the pigtails
is also managed within the tray. This allows easy
splicing and good management within the tray where
all the fibre is 250um bare fibre (no 900um protected
fibre within the tray.
The preloaded Pigtails for Singlemode applications
are manufactured with G657 fibre (bend insensitive
fibre) which help the person splicing not to have loss
problems due to marco-bending when coiling the fibres
inside the tray after splicing.
Patch Tray
For the Preloaded Patch trays the fibre inside the tray
is managed by cable guides that maintain bend
radius. The cable fan-out block if secured to the
swing-out section of the tray. The fibres from the fanout block are protected with clear 900um tubing that
are managed by the cable management spools. The
standard SM fibre used is G657 which is bend
insensitive fibre.